Rolls 917 User Manual
LIMITED WARRANTY
This product is warranted to the original consumer purchaser to be free from
defects in materials and workmanship under normal installation, use and service for a
period of one (1) year from the date of purchase as shown on the purchaser’s receipt.
The obligation of Rolls Corporation under this warranty shall be limited to repair
or replacement (at our option), during the warranty period of any part which proves
defective in material or workmanship under normal installation, use and service, provided
the product is returned to Rolls Corporation, TRANSPORTATION CHARGES PREPAID. Products returned to us or to an authorized Service Center must be accompanied by
a copy of the purchase receipt. In the absence of such purchase receipt, the warranty
period shall be one (1) year from the date of manufacture.
This warranty shall be invalid if the product is damaged as a result of defacement, misuse, abuse, neglect, accident, destruction or alteration of the serial number,
improper electrical voltages or currents, repair, alteration or maintenance by any person or
party other than our own service facility or an authorized Service Center, or any use
violative of instructions furnished by us.
This one-year warranty is in lieu of all expressed warranties, obligations or
liabilities. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A PAR TICULAR PURPOSE, SHALL BE
LIMITED IN DURATION TO THE ONE YEAR DURATION OF THIS WRITTEN
LIMITED WARRANTY. Some states do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you.
IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER
WARRANTY, EXPRESSED OR IMPLIED, WHATSOEVER. Some states do not allow
the exclusion or limitation of special, incidental or consequential damages so the above
limitation or exclusion may not apply to you. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state.
RFX917
WahLume
Wah/Volume Pedal
RFX
Salt Lake City, UT
9/00
W
AHLUME
OWNERS MANUAL
Thank you for purchasing the RFX917 WahLume pedal. The 917 is a smooth,
wide-sweep wah-wah pedal, and a linear-sweep volume pedal for even le v el
control. The unit is designed to provide years of reliable service. Adjustable switch
tension, easy access effect switch, po wer LED, and sturdy steel chassis are just a
few of the WahLume's features. Please read the f ollo wing manual carefully to get
the best results from your RFX917.
INSPECTION
1. Unpac k and Inspect the RFX917 pac kage .
Your RFX917 was carefully packed at the f actory in a protective carton. Nonetheless, be sure to examine the unit and the carton for any signs of damage that ma y
have occurred during shipping. If ob vious ph ysical damage is noticed, contact the
carrier immediately to make a damage claim. We suggest saving the shipping
carton and packing materials for safely transporting the unit in the future.
2. Complete the Warranty Registration Card and return it to the factory .
OPERATION
The RFX917 may be connected in a number of configurations . The following are
two examples of connection possibilities.
DIRECT INSTRUMENT CONNECTION
AMPLIFIER
POWER
WAH/VOL
RFX917
WAHL
UME
OUTPUT
INPUT
PWR
RFX917
WAHL
POWER
WAH/VOL
UME
OUTPUT
INPUT
PWR
DESCRIPTION
PWR LED: Indicates that pow er is applied to the RFX917. When using an AC
adapter, the LED is lit continuously. When using a battery, the LED is lit when the
input jack is in use.
INPUT: 1/4" jac k f or connection to an instrument or eff ects send of an amplifier.
OUTPUT: 1/4" jac k for connection to the input or effects return of an amplifier.
WAH/V OL SWITCH: When in, the RFX917 is in Volume mode. When out, the unit
is in W ah-wah mode .
POWER: For connection to a 12 VDC adapter (tip negative), Rolls part number
PS27.
Connect your instrument directly into the INPUT of the RFX917, and the
OUTPUT to the input of your amplifier .
EFFECTS LOOP CONNECTION
RFX917
WAHL
POWER
WAH/VOL
TO AMP OR
PREAMP EFFECTS RETURN
UME
OUTPUT
INPUT
PWR
FROM AMP OR
PREAMP EFFECTS SEND
Connect the output of your amplifier's Effects Send to the INPUT of the
RFX917. Connect the 917 OUTPUT to the amp's Eff ects Return.
Loading...