USA | AUSTRALIA | EUROPE
rolleaseacmeda.com
© 2016 Rollease Acmeda Group
Page 1
ROLLER SHADE
OWNER MANUAL
Page 1
CONTENTS
Fabric | Overview Pg.2
Fabric | Care Instructions Pg.3
SL15 | Overview Pg.4
Installation | How to Install SL15 system Pg.5
Installation | How to Install chain onto a clutch Pg.6
Installation Scenario Pg.7 - 8
Chainhold | Overview Pg.9
Chainhold | Installation Pg.10
Troubleshoting Pg.11 - 13
• A unique manufacturing process delivers technically
superior fabrics that are backed by a limited lifetime
warranty.
• Color independent solution.
• Environmentally friendly and safe.
• Flame Retardant.
• Available in two openness factors - 3%, 5%.
• Available in 6 colors.
• Versatile – can be used in roller shades and panel
track applications.
COLOURSFEATURES
For complete technical information, current test results, performance specifications, and samples, please contact Rollease Acmeda.
Page 2
3000 HT
SUNSHADOW SOLAR SCREEN
Alkenz SunShadow® Solar Screen fabrics offer a stylish and modern aesthetic for window
treatments that minimize the negative effects of the sun, while preserving outward visibility.
3000 HT’s broken twill offers customers a solution where white is always facing out, giving the
fabric superior reflective properties regardless of the color facing the room.
Page 3
HT3000 SUNSHADOW
Remove dust with a vacuum cleaner or compressed air.
Clean with a sponge and warm soapy water using mild detergent.
Rinse with clean water.
Do not scrub.
Do not use solvents or abrasives that could harm the coating of the fabric.
Leave the blind down until completely dry.
You may also very gently rub the fabric with a clean white pencil eraser to remove small
stains.
CARE INSTRUCTIONS
SYSTEM INDEX
FEATURES
Page 4
SL15 OVERVIEW
1 Skyline Clutch SL15
2 Skyline Adaptor
3 Skyline Pin End
4 Skyline Standard Bracket
5 Skyline Standard Bracket Cover
6 Aluminium Tube
7 Rollease Chain - 50-51BPF
8 Chainhold Tensioning Device
# = size
xx = colour / finish
The Skyline system is the flagship of the Rollease product line. The Skyline Medium SL15 Chain Control offers a
sleek rounded chain guard profile which is ideal for both residential & commercial applications. Skyline clutches
feature Velvetrol Technology and our limited lifetime warranty.
• Sleek, rounded chain guard design
• Reduced light gaps
• Colour coded bracket covers
• Smooth operation
• Guarded chain cover for minimal noise
• Long-lasting durability achieved from fiberglass-filled nylon construction
• Backed by Limited Lifetime Warranty
1
7
8
2
6
4
3
5
4
5
HOW TO INSTALL A SL15 SYSTEM
Page 5
INSTALLATION
STEP 1 – Insert Pin End Into Bracket
STEP 2 – Compress pin end and swing clutch end
into position
STEP 3 – Align clutch hooks onto
bracket & ensure they are securely
dropped into position
Once hooks are
aligned control
end will drop
into position
Installation complete
Page 6
STEP 2 – insert the new chain through opening of chain guard
STEP 3 – place 1 ball into tooth and pull chain clockwise
STEP 4 – feed remaining loose chain back through chain guard to complete
HOW TO INSTALL BEAD CHAIN ONTO CLUTCH
INSTALLATION
STEP 1 – cut and form a loop using bead chain provided
Page 7
INSTALLATION SCENARIO
SKYLINE PUNCH WINDOW HEADER MOUNT
Page 8
INSTALLATION SCENARIO
SKYLINE SINGLE EXPOSED SURFACE MOUNT
FEATURES
Page 9
• FAST ASSEMBLY, easily and quickly assembled.
• EASY INSTALLATION with outside mounting bracket available
• SLEEK APPEARANCE: small, attractive design blends with
any decor
• QUIET, reliable and efficient performance.
• SMOOTH OPERATION with both Rollease Acmeda metal and
plastic stop balls and chain connectors.
• AVAILABLE IN 4 FASHION COLORS: white, vanilla, gray, black
and a clear outside mounting bracket
THE ULTIMATE CHILD SAFE TENSION DEVICE
CHAINHOLD
The Chain Hold Tension Device by Rollease Acmeda provides a child safe tension mechanism for a chain roller system.
Unless properly installed, the Chain Hold Tension Device will partially prevent the window covering from functioning,
making it fully compliant with the ANSI/WCMA standard for safety.
The durable construction and engineered design of the Chain Hold Tension Device ensures smooth,
reliable performance. Be the source for high quality, child safe products that are built to last.
Make child safety your priority.
Page 10
CHAINHOLD INSTALLATION
The tension device must be installed to make the shade fully operable.
Before doing anything, you must first slide the tension device to the bottom of
the bead chain.
While holding the tension device in one hand, pull the plunger away from the
bead chain with the other hand. Lift the bead chain out of the bead locking groove
and slide the tension device to the bottom of the chain loop.
Pull the tension device down until the bead chain is fully tensioned (plunger will
be at the top) and then move the tension device up approximately 1⁄8”.
Mark the screw hole locations on the wall with a pencil.
IMPORTANT: When attaching to wood, included screws can be screwed directly into wood. When attaching to drywall
or metal, use anchors that are designed for such substrates. See your hardware store or supplier for guidance on
appropriate anchors for your substrate.
INSIDE MOUNT
If mounting into wood, pre-drill screw holes and then install the tension device
using the 2 large screws provided.
If not securing into wood, use appropriate anchors for the substrate and follow
anchor manufacturer’s instructions.
OUTSIDE MOUNT
Align the mounting bracket sight holes with the pencil marks.
If mounting into wood, pre-drill screw holes and then install the mounting
bracket using the 2 large screws provided.
If not securing into wood, use appropriate anchors for the substrate and follow
anchor manufacturer’s instructions.
Press the tension device onto the mounting bracket posts. Carefully install the
2 small screws provided, through the tension device into the mounting bracket
using a Phillips head screwdriver.
DO NOT OVER-TIGHTEN.
• Pencil
• Phillips head
• screwdriver
• Tape measure
• Power drill
Plunger
Bead locking
groove
2 LARGE SCREWS
for inside and
outside mount
2 SMALL SCREWS
for outside
mount
OUTSIDE MOUNT
BRACKET
for outside mount
CHAINHOLD
PARTS INCLUDED TOOLS REQUIRED
STEP 1: POSITION TENSION DEVICE
STEP 2: MOUNT TENSION DEVICE
Sight holes
Screw holes
Page 11
TROUBLE SHOOTING
PROBLEM CAUSE SOLUTION
Control not working Broken Chain Replace Chain (see Fig.A)
Chainhold is jammed
Chain “Attachment” Stuck Replace Ball Stop/Joiner (see Fig.D)
Slack in chain
Adjust Chain Length (Remove Ball)
(see Fig.B)
Chainhold is Broken
Incorrect Installation
Replace Chainhold
(see Fig.C & D)
Accidental Damage
Loose Chain Incorrect Chainhold Position
Adjust Chainhold Position (see Fig.B
& C)
Shades does not lift Broken Clutch Replace Clutch (see Fig.A)
Shade stuck in top or bottom
position
Missing Ball Stop Install Ball Stop (see Fig.D)
Hem Bar Wedged against object Adjust Ball Stop Location (see Fig.D)
For any other trouble shooting, please contact:
ROLLEASE ACMEDA CUSTOMER SERVICE
200 Harvard Avenue, Stamford, CT 06902, USA
T +1 203 964 1573 F +1 203 964 0513
FIG.A
Threading chain into joiner
FIG.B
Page 12
Remove chain from clutch
Cut chain to desired length and insert both ends into joiner.
TROUBLE SHOOTING
Pull chain through guard. Slide counter clockwise
around pulley.
Remove loose chain
from clutch.
FIG.D
FIG.C
Page 13
Thread through Chain.
Replacing Chainhold
TROUBLE SHOOTING
Remove Chain. Unscrew old Chainhold. Screw
new Chainhold into position.
Reposition Chainhold
Unscrew Chainhold. Move to desired position. Screw Chainhold to desired surface.
Thread through chain.
Remove & Re-attach stop ball
FIG.E
Page 14
Remove ball stop using
pliers (if there is no stop ball
then disregard this step)
Raise shade to desired top limit
position and attach ball stop.
Ensure to close
around chain.
TROUBLE SHOOTING
USA | AUSTRALIA | EUROPE
rolleaseacmeda.com
© 2016 Rollease Acmeda Group
Loading...