rollease acmeda AUTOMATE, Paradigm Flush Wall Switch Series Manual

AUTOMATE

™

Paradigm Flush Wall Switch

433 MHz

AUTOMATE™ | Paradigm flush wall switches feature a contemporary design and a
wirefree deployment, making them retrofit ready for any location. Paradigm 5 channel
switches are perfect for individual shade, room and whole home control.

The Paradigm flush mount switch can be mounted on top of any surface. It’s slim profile
eliminates the need for any holes to be cut in walls.

FEATURES:

• Multi channel selectable

• Retrofit Ready

• Group Control

• Compatible with screwless decorator cover plates

• Optionally functions as handheld remote

INSTR-MTRF-WS5-FLUSH V1.0 MAR 2017

CONTENTS

1 TECHNICAL DATA / PACK CONTENTS 3

2 SAFETY 4

3 INSTALLATION 5

3.1 Install switch batteries 5

3.2 Mount switch 5

4 FUNCTIONAL OVERVIEW 6

4.1 Buttons 6

4.2 Selecting a channel - (multi channel remote 6

5 PROGRAMMING 7

5.1 Using motor P1 button 7

5.2 Using pre-existing controller 8

5.3 Locking the limit setting function 8

6 TROUBLESHOOTING 9

2 | Automate™ Programming Instructions | Flush Wall Switch ROLLEASE ACMEDA

1 TECHNICAL DATA / PACK CONTENTS

TECHNICAL SPECIFICATIONS

Voltage: 3V (CR2430)

Frequency: 433.92 MHz

Transmitting Power: 10 milliwatt

Ambient Operating Temperature: -10°C -50°C

Transmission Distance: up to 200 meters (open space)

PACK CONTENTS

1 x Switch

2 x Wall fixing screws & anchors

1 x Mountable holder

1 x Instruction manual

1 x 3V – CR2430 Battery

1 x White single gang Decorator style wall plate (incl 2 mounting screws)

ROLLEASE ACMEDA Automate™ Programming Instructions | Flush Wall Switch | 3

2 SAFETY

5005833

WARNING: Important safety instructions to be read before installation and use.

Incorrect installation or use can lead to serious injury and will void manufacturer’s liability and warranty.
It is important for the safety of persons to follow the enclosed instructions. Save these instructions for future reference.

• Do not expose to water, moisture, humid and damp environments or extreme temperatures.

• Persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge
should not be allowed to use this product.

• Use or modification outside the scope of this instruction manual will void warranty.

• Installation and programming to be performed by a suitably qualified installer.

• Follow installation instructions.

• For use with motorized shading devices.

• Keep away from children.

• Frequently inspect for improper operation. Do not use if repair or adjustment is necessary.

• Keep clear when in operation.

• Replace battery with correctly specified type.

Rollease Acmeda declares this equipment is in compliance with the essential requirements and other relevant provisions of
R&TT EC Directive 1999/5/EC

Statement Regarding FCC Compliance

This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.

Do not dispose of in general waste.
Please recycle batteries and damaged electrical products appropriately.

4 | Automate™ Programming Instructions | Flush Wall Switch ROLLEASE ACMEDA