rollease acmeda MTPS-USB5-100EU, MTPS-USB5-1000AU, MT03-0301-050002, MTPS-USB-BK Quick Start Manuals
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
STATEMENT REGARDING FCC COMPLIANCE
REGULATORY COMPLIANCE
Do not dispose of in general waste.
Please recycle batteries and damaged electrical products appropriately.
2006/95/EC The Low Voltage Directive
89/336/EEC The Electromagnetic Compatibility Directive
1999/5/EC R&TT EC Directive
Rollease Acmeda declares this equipment is in compliance with the essential
requirements and other relevant provisions of the following directives:
Plug USB power adapter into a power outlet.
Plug the USB Repeater into the USB power adapter.
A blue LED on the USB Repeater will be visible
when the power is switched on.
Only use Rollease Acmeda USB power adapters with USB Repeater. Using other power
adapters/power sources may adversely affect USB Repeater performance and should
be avoided.
USB Repeater is plug and play. No setup required.
Press any button on a Rollease Acmeda remote
control. The blue light on the USB Repeater will
flash 3 times. This means the USB Repeater is
transmitting the signal.
QUICK START GUIDE
rolleaseacmeda.com
1
2
3
WARNING
NOTE
OR
OR
OR
OR
Maximum of 2 USB Repeaters can be used in one project
Don’t cover the USB Repeater with a metal shield
LED LIGHT
IMPORTANT
PART
MTPS-USB5-1000AU MTPS-USB5-100EU MT03-0301-050002 MTPS-USB-BK
REGION
AU EU UK US
QSG-MT02-0401-050007 v1.0 OCT 2017
24mm [0.93in]
50mm [1.97in]
64mm [0.91in]
Button
LED
24mm [0.93in]
50mm [1.97in]
64mm [0.91in]
Button
LED
11mm [0.41in]
OR
OR
OR
40m/131ft 40m/131ft
OR
OR
OR
OR
40m/131ft 40m/131ft
OR
The Rollease Acmeda USB Repeater can extend the RF range of operation for ARC-enabled
products by up to 40m (131ft).
40m/131ft 40m/131ft
OR
NOTE: RF source can be PULSE or any ARC Remote Control or Sensor.
LED STATU S
On Power On
Flashes x 3 Transmitting a remote control, motor or sensor RF433 MHz signal
Flashes x 1 Transmitting a Pulse hub RF433 MHz signal
INTERFACE USB
WORKING VOLTAGE 5±0.2 V DC
POWER SUPPLY USB POWER ADAPTER
RADIO FREQUENCY 433.92MHZ
RADIO DISTANCE OF
OPERATION
40m
131.23ft
RECEIVER SENSITIVITY ≥ -65 dB
TRANSMITTER POWER 3 ~ 3.5 dBm
RF PROTOCOL ARC
RF MODULATION FSK
SAFETY CERTIFICATION TUV
RF CERTIFICATION RTTE
ENVIRONMENTAL
CERTIFICATION
ROHS
ELECTROSTATIC
DISCHARGE
4KV (Contact discharge)
8KV (Air discharge)
COLOR BLACK
INDICATOR BLUE LED
IP CODE IP45
WEIGHT
0.01kg
0.022lbs
WORKING
TEMPERATURE
-5 ~ 50 °C
23 ~ 122 °F
WORKING HUMIDITY < 80%
STORAGE
TEMPERATURE
-10 ~ 65 °C
14 ~ 149 °F
INSTALLATION RANGE LED LIGHT INDICATION
SPECIFICATIONS
ROLLEASE ACMEDA USB POWER ADAPTERS
Loading...