Page 1
ROLINE HDMI Switch w/Remote Control, 4-way
USER MANUAL
Table Of Contents
1.0 Introduction……………………………………………………..2
2.0 Specifications……………………………………………… . 2/3
3.0 Package Contents………………………………………….…..3
4.0 Panel Descriptions………………………………………….….4
5.0 Connect and Operate…………………………………………. 4
6.0 Troubleshooting………………………………………………. 5
１
Page 2
ROLINE HDMI Switch w/Remote Control, 4-way
ROLINE HDMI Switch w/Remote Control, 4-way
Model No. 14.01.3564
1.0 INTRODUCTION
The HDMI Switch routes high definition video (in multiple resolutions up to 1080p)
and digital audio from any one of the several sources to display units. All the
inputs accommodate the connections of the high definition video sources
simultaneously, such as satellite systems and HD DVD players. The output sends
the high definition audio/video signals to a high definition display. Switching is
done via the IR remote that is provided with the unit.
1.1 FEATURES
The HDMI Switch has many features that enable them to perform in a superior
manner. Among those features you will find:
z Support with HDMI1.3b
z Support 12-bit Deep Color.
z 24K gold plated connector
z High performance up to 2.5Gbps
z Switches easily between the several HDMI sources
z Maintains high resolution video - beautiful, sharp HDTV resolutions up to
1080p, 2k, and computer resolutions up to 1920 x 1200 are easily achieved
z Discrete IR remote (included)
z HDMI pass-through
z HDCP pass-through
2.0 SPECIFICATIONS
Signal Inputs/Output
Input Video Signal 0.5-1.0 volts p-p
Input DDC Signal 5 volts p-p (TTL)
Maximum Single Link Range 1920X1200, 1080P
Output Video HDMI 1.3b + HDCP 1.0/1.1
Video format supported
VGA 640x480,800x600,1024x768,1920x1200
DTV/HDTV 480i/576i/480p/576p/720p/1080i/1080P
Digital Signal I/O
HDMI Compliance HDMI 1.3b
２
Page 3
ROLINE HDMI Switch w/Remote Control, 4-way
2.0 SPECIFICATIONS
Operating Frequency
Video Amplifier Bandwidth 2.5Gpbs/250MHz
Frequency Up to250MHz
Resolutions(HDTV)
Interlaced(50&60Hz) 480i,576i,1080i
Progressive(50&60Hz) 480p,576p,720p,1080p
Mechanical
Size(H-W-D) 26mmx99mmx192mm
Weight(Net) 500g
Environmental
Operating Temperature
Operating Humidity 10% to 85 % RH (no condensation)
Storage Temperature
Storage Humidity 5% to 90 % RH (no condensation)
Power Requirement
Output 5V DC 2A
Regulatory Approvals
Converter Unit FCC,CE,UL
Power Supply UL,CE,FCC
Accessories Adapter
0 ℃ to +70℃
-10℃ to +80℃
AC Power adapter
Note: Specifications are subject to change without notice.
EUROPEAN standard
3.0 Package Contents
z HDMI Switch
z Remote control
z Power Adapter
z User's Manual
３
Page 4
ROLINE HDMI Switch w/Remote Control, 4-way
4.0 PANEL DESCRIPTIONS
5.0 CONNECT AND OPERATE
1) Connect the HDMI input source into the HDMI switch. (Input cables are
optional)
*Please refer to connection diagram section.
2) Insert the DC side of 5v power supply into the switcher and then connect the
AC side of the power supply into the wall outlet.
3) Turn on the power.
Attention: Insert / Extract cable gently.
5.1 CONNECTION DIAGRAM
４
Page 5
ROLINE HDMI Switch w/Remote Control, 4-way
6.0 TROUBLESHOOTING
If the product doesn’t appear to be functioning, make certain that the source and
the destination device connected to the unit are functioning correctly.If there exist
another problems,please check the below settlement carefully.
Without LED light
Is the power adapter connected? Is the
ON/OFF switch on “ON” position?
Is the display unit turn on? Are cables
No display
connected properly? Please refer to
the connection diagram.
1/. Check the display volume
2/. Turn off the HDMI source (DVD,
PS3 etc.) and power on again. If it’s
still not ok, then
Without sound
3/. Turn off the switch box and turn on
again
4/. Repeat step 2 again if still not
working
* Some HDMI devices without ATC
certified will have such problems.
Remote not working
Replace the battery of the remote
control
Check the HDMI cables or replace with
Poor picture display on screen
new one
For 5x1 HDMI switch, turn on the
enhance switch on the back of the unit
DO NOT open the HDMI switch box. There are no user repairable parts inside.
6.1 Non-HDCP Compliant Devices
If a DVI device does not appear to work, make certain that the device is HDCP
compliant. A non-HDCP compliant DVI device will not work with a signal that has
HDCP encoding present
５
Loading...