Roland Professional A/V HT-TX01, HT-RX01 User Manual
HDBaseT-compatible transmitter/receiver capable of transmitting
HDBaseT-compatible transmitter/receiver capable of transmitting
HDMI signals up to 100 meters over an Ethernet cable
HDMI signals up to 100 meters over an Ethernet cable
HDBaseT TRANSMITTER
HT-TX01
Rear Panel
HDBaseT-compatible transmitter/receiver capable of
transmitting HDMI signals up to 100 meters over an
Ethernet cable
Converts HDBaseT signals to/from HDMI
Long-distance HDMI transmission
Connecting an Ethernet cable to the HT-TX01 or HT-RX01 enables
transmission of HDMI signals over a distances of up to 100 meters.*
makes it possible to connect video cameras, Blu-ray decks, switchers, and
other source equipment to LCD monitors, projectors, and other display
devices. In addition to HDMI signals, RS-232C*
transmitted, making it possible to send control signals along with video and
audio reducing system wiring.
*1 When making a connection to the HDBaseT connector, use a Cat 5e (Category 5e) or higher shielded
LAN cable (shielded twisted pair.STP). Connecting an unsuitable cable might result in a drop in signal
quality or interrupted video transmission. Also, using an unshielded LAN cable might cause the unit to
malfunction due to accumulated static charge in the cable.
*2 For RS-232C signal input/output, use the included conversion cable (D-Sub 9-pin miniature phone
plug).
2
signals can also be
1
This
HDBaseT RECEIVER
HT-RX01
Rear Panel
Up to 1080/60p and WUXGA support for HDMI
HDCP compliant
Capable of RS-232C transmission
[Example] Long-distance extender for HDMI signals
Blu-ray Deck
HT-TX01 HT-RX01
HDMI
Control PC
[Example] XS series input extender
PTZ
HDMI
RS-232
HT-TX01
HDBaseT
Ethernet
Cable
HDBaseT
Ethernet
Cable
HT-RX01
HDMI
HDMI
RS-232
Projector
XS Series
Roland XS series output receiver
The HT-RX01 can be used as a receiver for the HDBaseT output from XS
series multi-format matrix switchers. Using the RS-232C signal transmission
function of the XS series lets you transmit RS-232C signals input to the XS
series device along with video and audio signals. This can achieve
audio/video transmission in school auditoriums, company conference halls,
and other large spaces.
[Example] XS series HDBaseT extender
HDBaseT
Blu-ray Deck
PC
Control
HDMI
HDMI
RS-232
XS Series
Ethernet
Cable
Ethernet
Cable
HDBaseT
HT-RX01
HT-RX01
HDMI
RS-232
HDMI
Projector
Display
Specications
Input Formats
Audio Formats
Input Connectors
Output Connectors
Other Connectors
Transmission distance
Operating temperature range
Storage temperature range
Power Supply
Dimensions
Accessories
HT-TX01 : HDBaseT TRANSMITTER
HT-RX01 : HDBaseT RECEIVER
480/59.94i, 576/50i, 480/59.94p, 576/50p, 720/59.94p, 720/50p, 1080/59.94i, 1080/50i,
1080/59.94p, 1080/50p, 640×480, 800×600, 1024×768, 1280×768, 1280×1024, 1366×768, 1400×1050, 1600×1200, 1920×1200
* RGB formats : Conforms to VESA DMT Version 1.0 Revision 11.
* The maximum refresh rates of RGB is 75 Hz. (excluding 1600 x 1200 and 1920 x 1200. The refresh rate of these 2 is 60Hz)
* 1920 x 1200/60Hz : Reduced blanking
The maximum is PCM 8ch, Dolby Digital, True HD DTS-HD Master Audio
HDMI×1 : Type A (19 Pins)
RJ45×1
RJ45×1
HDMI×1 : Type A (19 Pins)
RS-232 x 1 : 9 pins D-sub type
Communication method : Synchronous (asynchronous), full-duplex
Communication speed : 9600 bps, 19200 bps, 38400 bps, 115200 bps
Parity : none
Data length : 8 bit
Stop bit : 1 bit
Code set : ASCII
Flow Control : none
* When making a connection to the HDBaseT connector, use a Cat 5e (Category 5e) or higher shielded LAN cable (shielded twisted pair.STP).
Connecting an unsuitable cable might result in a drop in signal quality or interrupted video transmission.
Also, using an unshielded LAN cable might cause the unit to malfunction due to accumulated static charge in the cable.
The maximum is 100m (328 ft)
* To make connections, use a Cat 5e (Category 5e) or later shielded LAN cable.
* The available distance depends on the quality of the LAN cable.
0 ~ 40˚C
-20 ~ 60˚C
AC adaptor
81 (W) x 93 (D) x 24 (H) mm
3-3/16 (W) x 3-11/16 (D) x 1 (H) inches
Operating temperature humidity
Storage temperature humidity
Current Draw
Weight
10 ~ 85% (no condensation)
10 ~ 85% (no condensation)
2A
0.3kg (excl. AC adaptor)
AC adaptor, AC plugs (3 types)
RS-232 conversion cable (2 m (6 ft 6 inches))
Ferrite core x 3
Owner's Manual
Dimensions XS Series
93
24
69
81
90
6024.9
An all-in-one matrix switcher also capable of multi-screen
output and screen compositing.
Easy control of both video and audio using a tablet or
computer.
73.4
All specifications and appearances are subject to change without notice. Company names and product names appearing in this document
are registered trademarks or trademarks of their respective owners. Roland is either registered trademark or trademark of Roland
Corporation in the United States and/or other countries. It is forbidden by law to make an audio recording, video recording, copy or revision
of a third party‘s copyrighted work (musical work, video work, broadcast, live performance, or other work), whether in whole or in part, and
distribute, sell, lease, perform, or broadcast it without the permission of the copyright owner. Do not use this product for purposes that could
infringe on a copyright held by a third party. We assume no responsibility whatsoever with regard to any infringements of third-party
copyrights arising through your use of this product. Copyright 2014 Roland Corporation. All rights reserved.
Series
: 8 x Inputs , 4 x Outputs
: 8 x Inputs , 3 x Outputs
: 8 x Inputs , 2 x Outputs
Printed in Japan. Nov. 2014 RAM-20050 BCC-BCC
Loading...