Roland Corporation UA-30 Addendum

Use with Windows 2000

Driver installation and settings

This device supports Microsoft ® Windows® 2000
Professional.
Use the following procedure to install the driver and
make settings.

* Please refer to the owner’s manual as well.

1. Turn on the power of your computer.

* To prevent damage to your speaker system, turn down the

volume of this device and of your peripheral audio equipment.

2. Log on as Administrator.

* If you log on as other than Administrator and perform the

installation, the driver will not be installed correctly.

3. After Windows starts up, connect this device.

(1) Before connection, you must exit all currently-

running applications.

(2) Use a USB cable to connect this device to your

computer.

* For details on connection, refer to the owner’s manual for

your device.

(3) If your device is the MA-150U, turn on its power.

4. Installation will begin automatically, and will end

automatically.
Depending on your computer, a certain length of time
may be required for the installation.

* Do not touch the mouse or keyboard while the Found New

Hardware dialog box is open, since the installation is in

progress.

5. Specify the audio input/output destinations.
(1) Click the Windows Start button, and from the menu,

choose Settings-Control Panel.

(2) In Control Panel, double-click the Sounds and

Multimedia icon to access the Sounds and
Multimedia Properties dialog box.

(3) Click the Audio tab.
(4) Select USB Audio Device as the Preferred device

for sound playback:.

(5) If your device is the UA-30, select USB Audio Device

as the Preferred device for sound recording.

(6) When you have finished making settings, click OK.

6. Adjust the volume so that you hear sound.

• Adjust the volume of this device and of your peripheral
audio devices.

• Click the Windows Start button. From the menu that
appears, choose Programs-Accessories-Entertainment­Volume Control, and adjust the volume.

When using the MA-150U speakers, pressing PUSH USB
LEVEL alters the speaker volume level controlled by the
regular volume controls. However, when the Windows CD
player screen is active, the CD player volume level changes.

To digitally play back a music CD

■ Procedure

1. In Control Panel, double-click Sounds and

Multimedia.

2. Select the Hardware tab, and in the Devices: list, double-
click Show CD-ROM drive.

3. The CD-ROM drive property dialog box will appear.
Select the Properties tab.

4. In Digital CD Playback, check the Enable digital CD
audio for this CD-ROM device check box.

5. Click OK to close the window. If you need to restart your
computer, be sure to restart it.

After clicking OK, the following or a similar message may
appear. In such instances, you may not be able to play music
CDs, even after clicking Yes. Should this occur, please
consult the computer manufacturer for a solution or
workaround.

Uninstalling the driver

In the following situations, please uninstall the driver and
then re-install it.

• If you wish to install the driver again

• If driver installation was halted mid-way through the

process

■ Procedure

1. Use a USB cable to connect this device to your

computer.

* If your device is the MA-150U, turn on its power.

2. In Control Panel, double-click System.

3. Select the Hardware tab, and then select Device Manager.

4. Double-click Sound, video and game controllers, and

select USB Audio Device from the list.

5. In the Device Manager dialog box, click Action and select

Uninstall.... Then as directed by the screen, click OK.

6. After uninstalling, disconnect this device from your
computer, and restart your computer.
After restarting, install the driver following the procedure
described in this document.

Installing the included software (UA-30 only)

Install the included software as described in the owner’s
manual.

40347490