--------------------------------------------------------------
Works with Any Roland Drum Pad
The TMC-6 works with the full range of Roland drum pads—from
our entry-level gum rubber pads to our patented mesh-head
V-Pads. Just connect a drum trigger cable and you’re ready to
play. The TMC-6 even supports separate head and rim shot
triggering when used with the PD-120 and PD-80R V-Pads, and
the three-way triggering of our CY-15R and CY-12R/C V-Cymbals.
--------------------------------------------------------------
Great for Acoustic Drums
When paired up with acoustic drum triggers, you can use the
TMC-6 to trigger a sampler or other sound module from your
acoustic drum set. Tap into a universe of sounds with this easy-touse bridge.
--------------------------------------------------------------
Trigger MIDI Modules
With the TMC-6 and an electronic percussion pad or acoustic set
with triggers, you can play high-quality drum sounds from MIDI
instruments like Roland’s Fantom* workstation or XV -5080 module.
●Number of Memories 12 ●Display 7 segments, 3 characters (LED) ●Connectors Trigger Input Jacks x 6 (7 Inputs),
MIDI OUT Connector, AC Adaptor jack
●SwitchesINC, DEC, PARAMETER SELECT, TRIGGER SELECT , EDIT, TRIG6/HH
CTRL SELECT, POWER
●Power Supply AC Adaptor (DC 9 V) ●Current Draw 1,000 mA ● Dimensions218 (W)
x 127 (D) x 58 (H) mm, 8-5/8 (W) x 5 (D) x 2-5/16 (H) inches
●Weight850 g / 1 lb 14 oz (excluding AC Adaptor)
●Accessories Owner's Manual, AC Adaptor (ACI/ACB Series), Mounting Plate, Screws (M5 x 12 mm) x 4 ● Options
Pads (PD-5, PD-6, PD-7, PD-9, PD-80, PD-80R, PD-100, PD-120), Cymbals (CY-6, CY -12H, CY -12R/C, CY -14C, CY -15R),
Kick Trigger (KD-7, KD-80, KD-120), Hi-Hat Control Pedal (FD-7), Cable (PCS-31 (STEREO<-->MONOx2)), Foot
Switch (BOSS: FS-5U, DP-2), Pad Stand (PDS-15), Pad Mounts (MDH-7U, MDH-10U), All-Purpose Clamp: APC-33
* The specifications are subject to change without notice.
TMC-6 Specifications
31
* “Phantom” is a registered trademark of and is licensed by Phantom Guitar Works.
--------------------------------------------------------------
Expand Your V-Drums Kit
Use the TMC-6 to add more pads to your V-Drums kit, even if
your module is out of trigger inputs. Now you can have those
extra V-Cymbals and rack toms you’ve been dreaming about.