Roland Corporation FP-4, FP-5, FP-7, FP-8, FR-3 User Manual

...

Roland Corporation FP-4, FP-5, FP-7, FP-8, FR-3, Fantom-G6, FP-2, FR-7, HP-557, TD-4, TD-5, VT-1, EXR-46, EXR-3, PAD-8, PAD-80, BR-1180, BR-1200CD, BR-1600CD, BR-532, BR-600, BR-8, BR-800, BR-864, BR-900CD, CD-2, CD-2E, CD-2i, CDX-1, CE-20, DR-670, DR-770, DR-880, DS-330, E-09, E-10, E-20, EM-2000, EM-55, EXR-40, GR-20, GR-09, GR-1, KR-500, KR-5000, KR-55, M-OC1, PCR-30, PCR-500, PCR-80, SX-700, TR-707, TR-909, V-BASS, DEP-5, R-8M, TD-3, CR-80, Juno-Di, Juno-G, KR-1070, P-55, PCR-M80, TD-6V, XV-2020, XV-3080, XV-5050, XV-5080, XV-88, XP-10, XP-30, XP-50, XP-60, XP-80, VS-2400CD, VS-2480, VS-1824CD, VS-1880, VR-700, VP-7, VP-70, VP-9000, VM-3100, VM-C7100, VK-88, VK-8M, VK-1000, VK-7, VK-77, VGA-5, VGA-7, VG-99, VG-88, VG-8EX, VF-1, VA-3, VA-5, VA-7, VA-76, VB-99, V-Piano, V-Synth, U-110, TR-727, TR-626, TR-505, TMC-6, TD-8, TD-9, TD-6, TD-20, TD-10, SRV-2000, SRV-3030, SRV-3030D, SPD-20, SPD-30, SPD-6, SPD-8, SPD-S, SP-808, SP-202, SP-303, SP-404, SP-505, Sonic, SH-32, SH-201, SH-01, SD-35, SDE-330, SC-88, SC-880, SB-55, SC-155, SC-33, SC-50, SC-55, RV-70, RSP-550, RSS-10, RS-5, RS-50, RS-70, RS-9, RMP-3, RMP-5, RM-2, RD-300SX, RD-500, RD-600, RD-700, RD-700GX, RD-700SX, RC-50, RD-150, RD-170, RA-50, RA-800, RA-90, RA-95, R-70, R-09, R-09HR, PW-10, Prelude, PK-5, PM-16, PCR-M30, PC-150, PC-200, MV-8000, MV-8800, MT-100, MT-120, MT-120S, MT-200, MT-300S, MT-32, MT-90S, MMP-2, MKS-50, MK-80, MICRO, ME-50B, ME-6, ME-6B, ME-70, ME-8, ME-8B, ME-X, ME-10, ME-20, ME-20B, ME-25, ME-30, ME-33, ME-5, ME-50, MC-307, MC-505, MC-808, MC-909, M-SE1, M-VS1, M-BD1, M-DC1, M-GS64, M-16DX, M-10, M-1000, LVC-1N, KR-5500, KR-570, KR-575, KR-577, KR-650, KR-7, KR-75, KR-770, KR-977, KR-3000, KR-350, KR-3500, KR-375, KR-377, KR-4500, KR-4700, KR-277, KR-177, KR-1077, KR-15, KF-90, JW-50, JX-1, JX-305, JV-2080, JV-30, JV-35, JV-50, JV-80, JV-880, JV-90, JV-1000, JV-1010, JS-30, JS-5, Juno-D, JP-8000, JD-800, JD-990, HPD-10, HPD-15, HP-130, GX-700, GW-7, GT-10, GT-10B, GT-3, GT-5, GS-10, GR-33, GP-100, GP-16, GM-70, GI-10, G-600, G-70, G-800, G-1000, FR-5, FG-10, FG-1000, FC-100, FC-200, Fantom-XA, FANTOM-XR, Fantom-X7, Fantom-G7, Fantom-G8, FANTOM-S, FANTOM-S88, FANTOM-X6, F-110, Fantom, EXR-5, EQ-20, EP-9, EP-5, EP-7, EP-75, EP-85, EM-25, EM-30, EM-50, EM-10, EM-15, EG-101, E-80, E-86, E-96, E-70, E-600, E-60, E-50, E-500, E-30, E-300, E-35, DR-660, DR-202, DR-3, DJ-70, DEP-3, DDR-30, DD-20, DB-30, DB-60, DB-88, DB-90, D-2, AXIS-1, AX-Synth, AX-09, AT-Series, AP-700, AD-8, A-30, A-300PRO, A-33, A-37, A-50, A-500PRO, A-500S, A-70, A-80, A-800PRO, A-880, A-90, A-90EX, JV-1080, SP-606, SE-70, RD-300GX, PCR-300, W-50, VS-2000CD, VP-770, VM-C7200, VK-8, VG-8, TD-7T, TD-7, TD-20X, TD-12, SRV-330, SPD-11, SE-50, SDX-330, R-8, R-5, Pro-E, PMA-5, PCR-M50, PCR-800, PCR-50, MC-303, MC-09, M-760, M-660, KR-5, KR-15M, JUNO-STAGE, Juno-Gi, JP-8080, GW-8, GT-8Pro, GT-8, GT-6B, GT-6, GR-30, GP-20, GI-20, FANTOM-X8, EM-20, E-68, E-66, E-56, E-36, DR-550, DR-5, AX-7, AX-1, A-220 User Manual

Factory Reset Procedures

Caution: Many of these procedures will erase all memory in the unit. Make sure you have backed up any data you wish to keep before performing these procedures! If a unit is not listed here, it does not have an initialization procedure that is user-executable.

Model Procedure

A-30/33/37 Power on while holding WRITE. (Hold for 15 seconds) A-50/80 While holding the first, third, and fourth buttons under the display, press CHANNEL. Then

press any cursor button

A-70/90/90EX Power on while holding down MANUAL, then press ENTER A-220 Power on while holding B and MEMORY A-300PRO Hold ACT and <, use the VALUE dial to select “FACTORY RESET.” Press ENTER twice. A-500PRO Hold ACT and <, use the VALUE dial to select “FACTORY RESET.” Press ENTER twice. A-500S Hold MIDI CH and PGM CHANGE, press the SYSTEM key, Use the VALUE dial to select

“SY6,” press ENTER 3 times.

A-800PRO Hold ACT and <, use the VALUE dial to select “FACTORY RESET.” Press ENTER twice. A-880 Power on while holding SIGNAL and MEMORY AD-8 Power on while holding WRITE. Confirm that “F” flashes in the display, then release

WRITE. Press WRITE again

AP-700 Power on, then press EXIT repeatedly to get ANALYZER/FILTER screen. Cursor to MENU,

press ENTER. Cursor to SYSTEM, press ENTER. Cursor to INITIALIZE, press ENTER. Use VALUE to select ALL MEMORY, then press ENTER twice

AT-Series (Make sure disk drive is empty.) Power on while holding ONE TOUCH PROGRAM AX-09 Power on while holding FAVORITE A, B, and WRITE. Press TONE 5, then press WRITE. AX-1/7 Power on while holding WRITE. (Hold for 30 seconds) AXIS-1 While holding FUNCTION, press the F#0, C#2, and D#2 keys AX-Synth Power on while holding INC/+, DEC/-, and TONE 7(ORGAN/CLAVI), then press WRITE.

Model Procedure

BR-8/532/1180 Press UTILITY. Cursor to “Initialize.” Press ENTER. Cursor to “All.” Press ENTER twice BR-600 Power on while holding GUITAR, MIC, and LINE. Press ENTER. BR-800 Press MENU. Cursor to “Factory Reset.” Press ENTER three times. BR-864 Power on while holding INPUT SELECT/GUITAR/BASS, MIC, and LINE. Press ENTER BR-900CD/

1200CD BR-1600CD Press UTILITY. Cursor to “Initialize.” Press ENTER. Cursor to “All.” Press ENTER twice

Press UTILITY. Press CURSOR Right to select “Initialize.” Press ENTER. Press CURSOR Right to select “All.” Press ENTER twice

Model Procedure

CD-2 Press MENU. Use the DATA dial to select “INITIALIZE.” Press ENTER twice. CD-2E/2i Press MENU. Use the < / > buttons to select “Factory Reset.” Press ENTER twice. CDX-1 Press UTILITY. Cursor right to “INIT”. Press ENTER/YES. Use CURSOR buttons to select

desired target to be initilaized, (GLOBAL, FX, MIXER, ALL). Press ENTER/YES twice

CE-20 Power on while holding WRITE. Release WRITE then press WRITE again CR-80 Power on while holding DEL and REPEAT, then press ENTER

Model Procedure

D-2 With the unit on, Hold WRITE and press SYSTEM. Press ENTER twice DB-30 Power on while holding the START/STOP button until “F” shows in the display DB-60 Power on while holding the MEMORY button until “F” shows in the display DB-88 Power on while holding METRONOME MODE and LOOP MODE. Press WRITE DB-90 Power on while holding MEMORY DD-20 Power on while holding WRITE. Release, then press WRITE again

Factory Reset Procedures

DDR-30 DEP-3/5 Power on while holding MEMORY NO UP (^) and DOWN (v) DJ-70/70MKII Power on while holding the UP ARROW button to enter test mode. Press A, press C, press

DR-3 Press EDIT. CURSOR Right to select “SYSTEM.” Press ENTER. CURSOR Right to select

DR-5 Power on while holding FRET LEFT (<) and RIGHT (>), then press ENTER twice DR-202 Power on while holding MUTE and ROLL. Press TAP/ENTER. Cursor to “YES” in the

DR-550/550MKII Power on while holding -1 and +1, then press START DR-660 Press UTILITY, then use LEFT (<) and RIGHT (>) to select [8] INIT. Press ENTER twice DR-670 Power on while holding REC and STOP / CONT. Press ENTER twice DR-770 Press UTILITY, then use LEFT (<) and RIGHT (>) to select [9] F. RST. Press ENTER twice DR-880 Press EDIT. Press CURSOR Right to select “Factory Reset.” Press ENTER twice DS-330 Power on while holding REVERB and SPLIT, then press YES

Power on while holding the #1 button

S1. When finished the screen will display IC21 = OK

<FACTORY RESET>. Press ENTER twice

display. Press TAP/ENTER

Model Procedure

E-09 Press FUNCTION so it is lit. Use the FAMILY </> buttons to select “Utility,” then use the

SELECT </> buttons to select “Factory Reset.” Press TEMPO >/YES twice

E-10/20/30 Power on while holding WRITE E-35 Power on while holding REC/PUNCH IN E-36 Power on while holding RECORDER E-50/60/80 Press MENU. Press “UTILITY” then press “FACTORY RESET.” Press “EXECUTE.” E-56 Power on while holding WRITE E-66 Power on while holding REC in the DISK RECORDER section E-68/70/86/96 Power on while holding WRITE E-300/500 Press UTILITY. Use the buttons under the display that correspond to <<PAGE>> to

select FACTORY PRESET. Press EXECUTE, then press OK. When the screen displays RESET COMPLETE, turn the unit off, then on

E-600 Press FUNCTION and use the PAGE (<) (>) buttons to select “Factory Preset.” Touch the

“Execute” icon followed by the “OK” icon on the display screen. Power off then on

EG-101 Power on while holding WRITE EM-10 Power on while holding USER PROGRAM/WRITE EM-15/25 With the unit on, press FUNCTION until “RESUME” shows in the display. Then press

TEMPO+

EM-20/30/50/55 Power on while holding USER PROGRAM/WRITE EM-2000 Performance Sets need to be loaded from disk to restore factory default settings. Insert

the factory ZIP Disk into the drive and power on. Press F5 (Disk), then F1 (Load). Press PAGE ^ / v to select “PRF MEM” and press UPPER 1(Execute)

ep-5/7/7MKII While holding REC and PLAY, press STRINGS. Power off and then back on ep-9 While holding REC and PLAY, press CHOIR. Power off and then back on ep-75/85 Power on while holding REC EQ-20 Power on holding LIGHT and SELECT. Release, then press LIGHT and SELECT again EXR-3/5 Power on while holding USER PROGRAM/WRITE EXR-40/46OR Power on while holding USER PROGRAM/WRITE

Model Procedure

F-110 Hold REVERB and press TRANSPOSE, hold OTHERS and use the +/- buttons to select

“Fct” in the display. Press the Stop/Start button twice.

Fantom With the unit on, press MENU. Press the UP or DOWN cursor buttons to select FACTORY

RESET. Press 8 (EXECUTE) twice

Fantom-G6/7/8 Press MENU. Use the CURSOR Up and Down buttons to select “Factory Reset,” then press

F8 [Select] followed by F7 [OK]. Press F7 [OK] when completed.

Factory Reset Procedures

Fantom-S/S88

Fantom-Xa Press EXIT. Press MENU. Turn the VALUE dial to select “Utility” and then press ENTER.

Fantom-XR Press MENU. Press CURSOR Down to select “UTILITY.” Press ENTER. Press CURSOR

Fantom-X6/7/8 Press MENU. Press the CURSOR DOWN button to select “Utility.” Press button 3 (Factory

FC-100MKII Power on while holding pedals #1, #2, and #8 FC-200 Power on while holding the #10 pedal, then press the CTL pedal FG-10/1000 Power on while holding CLEAR and EXIT FP-2 Power on while holding REVERB until “Fct” shows in the display FP-4 Power on while holding FUNCTION FP-5 Power on while holding PEDAL CONTROL FP-7 Power on while holding FUNCTION FP-8 Press FUNC and release. While holding PIANO, press FUNC again FR-3 Power on while holding SET and ORCHESTRA. FR-5/7 Power on while holding MENU/WRITE. Press the DATA/ENTER button

Press MENU. Use the CURSOR Up or Down buttons to select “Utility,” then press ENTER. Press 3 (Factory Reset) Press 8 (Execute)

Press F3. Press F6

Down to select “FACTORY RESET.” Press ENTER twice

Reset). Press Button 8 (Exec). Cycle the power

Model Procedure

G-70 Press MENU. Touch UTILITY, then touch FACTORY RESET. Touch EXECUTE G-600/800 Power on while holding WRITE G-1000 Performance Sets need to be loaded from disk to restore factory default settings. Insert

the factory ZIP Disk into the drive and power on. Press F5 (Disk), then F1 (Load). Press PAGE ^ / v to select “PRF MEM” and press UPPER 1 (Execute)

GI-10 Power on while holding PARAMETER + and -, then press VALUE + GI-20 With the power off, set the GUITAR /BASS switch to match the instrument you are using.

Power on while holding TUNER(STRING SEL). Press WRITE

GM-70 Poly Mode: Power on while holding PLAY, GENERAL EDIT, and IND EDIT.

Mono Mode: Power on while holding TUNE, CONTROL ASSIGN, and DATA TRANSFER

GP-16 Power on while holding the #6, #7, and #8 buttons. Use the FUNCTION LEFT (<) and

RIGHT (>) buttons to select “2.All Factory Preset,” then press WRITE three times

GP-20 Power on while holding WRITE. Release WRITE, (The MEMORY indicator will flash), then

press WRITE again

GP-100 Power on while pressing in the PARAMETER knob, then press WRITE GR-09 Power on while holding Pedal #2, then press the VALUE + button. Now press EDIT/PLAY GR-1 Power on while holding WRITE/COPY, then press YES GR-20 Power on while holding WRITE, then press WRITE again GR-30 Power on while holding Pedal #2, then press the PATCH+ button to select INI. Press

EDIT/PLAY. Then press PATCH+ and PATCH- simultaneously

GR-33 Press SYSTEM. Press PARAMETER (>) right to select “FACTORY RESET”. Use VALUE to

select “ALL”. Press WRITE twice

GS-10 Power on while holding the CHANNEL SELECT A and B buttons (within the

PREAMP/SPEAKER section), then press WRITE

GT-3 Power on while holding MOD and SFX. Press WRITE GT-5 Power on while holding MOD and FEEDBACKER/SLOW GEAR. Press WRITE GT-6/8/Pro Power on while holding the PREAMP ON/OFF and (PREAMP)TYPE/VARIATION buttons.

Press WRITE

GT-6B Power on while holding COMP/LIMITER ON/OFF and TYPE VARIATION. Press WRITE GT-10/10B Press SYSTEM. CURSOR right to select “FACTORY RESET” then press ENTER twice. GW-7 Press FUNCTION. Press SELECT Left or Right to choose “Utility.” Press ENTER twice GW-8 Press MENU. Use the CURSOR Up and Down buttons to select “Utility” then press ENTER.

Use the CURSOR buttons to select “Factory Reset” then press ENTER twice. Power off and on.

GX-700 Press TUNER/UTILITY. Use PARAMETER LEFT (<) and RIGHT (>) buttons to select FACT

+ 7 hidden pages