How it Works
Roland Corporation
Loading...
HP-103
Owner's Manual
56 pgs2.32 Mb0
Table of contents
Loading...

Roland Corporation HP-103 Owner's Manual

Owner’s Manual
Thank you, and congratulations on your choice of the Roland Digital Piano HP103.
Main Features
Piano Sounds with Rich Resonance and Wide-ranging Expressiveness
Pursuing the Playing Feel of a Grand Piano
This instrument features a progressive hammer action keyboard, which duplicates the touch of a grand piano, with a heavier touch in the lower register, and a lighter touch in the upper register. The pedal is designed for good-feeling response, and allows subtle performance nuances to be expressed.
Comfortable for Use with Headphones
Special effects applied to the sound when headphones are used make listening through headphones comfortable, not fatiguing. And in addition to an indicator on the front panel that lights up when you connect a pair of headphones, the HP103 also provides a convenient hook where you can keep your headphones when they’re not in use.
A Variety of Helpful Practice Features and Built-in Piano Songs
A metronome function and “two-track recorder,” the built-in songs for a collection of scores (60 songs included), and other features let you experience piano lessons in ways possible only with a digital piano.
Before using this unit, carefully read the sections entitled: “IMPORTANT SAFETY INSTRUCTIONS” (p. 2), “USING THE UNIT SAFELY” (p. 3, 4), and “IMPORTANT NOTES” (p. 5, 6). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner’s manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference.
Copyright © 2004 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in
any form without the written permission of ROLAND CORPORATION.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING - When using electric products, basic precautions should always be followed, including the following:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Never use with a cart, stand, tripod, bracket, or table except as specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
For the U.K.
IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.
BLUE: BROWN:
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Under no circumstances must either of the above wires be connected to the earth terminal of a three pin plug.
NEUTRAL LIVE

USING THE UNIT SAFELY

Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly.
Used for instructions intended to alert the user to the risk of injury or material damage should the unit be used improperly.
* Material damage refers to damage or
other adverse effects caused with respect to the home and all its furnishings, as well to domestic animals or pets.
001
• Before using this unit, make sure to read the instructions below, and the Owner’s Manual.
..........................................................................................................
002a
• Do not open or perform any internal modifica­tions on the unit.
..........................................................................................................
003
• Do not attempt to repair the unit, or replace parts within it (except when this manual provides specific instructions directing you to do so). Refer all servicing to your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the “Information” page.
..........................................................................................................
004
• Never use or store the unit in places that are:
• Subject to temperature extremes (e.g., direct
sunlight in an enclosed vehicle, near a heating duct, on top of heat-generating equipment); or are
• Damp (e.g., baths, washrooms, on wet floors);
or are
• Humid; or are
• Exposed to rain; or are
• Dusty; or are
• Subject to high levels of vibration.
..........................................................................................................
007
• Make sure you always have the unit placed so it is level and sure to remain stable. Never place it on stands that could wobble, or on inclined surfaces.
..........................................................................................................
008a
• The unit should be connected to a power supply only of the type described in the operating instruc­tions, or as marked on the bottom of unit.
..........................................................................................................
008e
• Use only the attached power-supply cord. Also, the supplied power cord must not be used with any other device.
..........................................................................................................
The symbol alerts the user to important instructions or warnings.The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never be carried out (are forbidden). The specific thing that must not be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the unit must never be disassembled.
The ● symbol alerts the user to things that must be carried out. The specific thing that must be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the power­cord plug must be unplugged from the outlet.
009
• Do not excessively twist or bend the power cord, nor place heavy objects on it. Doing so can damage the cord, producing severed elements and short circuits. Damaged cords are fire and shock hazards!
..........................................................................................................
010
• This unit, either alone or in combination with an amplifier and headphones or speakers, may be capable of producing sound levels that could cause permanent hearing loss. Do not operate for a long period of time at a high volume level, or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should immediately stop using the unit, and consult an audiologist.
..........................................................................................................
011
• Do not allow any objects (e.g., flammable material, coins, pins); or liquids of any kind (water, soft drinks, etc.) to penetrate the unit.
..........................................................................................................
012a:
• Immediately turn the power off, remove the power cord from the outlet, and request servicing by your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the “Information” page when:
• The power-supply cord, or the plug has been
damaged; or
• If smoke or unusual odor occurs
• Objects have fallen into, or liquid has been
spilled onto the unit; or
• The unit has been exposed to rain (or otherwise
has become wet); or
• The unit does not appear to operate normally or
exhibits a marked change in performance.
..........................................................................................................
3
013
• In households with small children, an adult should provide supervision until the child is capable of following all the rules essential for the safe operation of the unit.
..........................................................................................................
014
• Protect the unit from strong impact.
(Do not drop it!)
..........................................................................................................
015
• Do not force the unit’s power-supply cord to share an outlet with an unreasonable number of other devices. Be especially careful when using extension cords—the total power used by all devices you have connected to the extension cord’s outlet must never exceed the power rating (watts/amperes) for the extension cord. Excessive loads can cause the insulation on the cord to heat up and eventually melt through.
..........................................................................................................
016
• Before using the unit in a foreign country, consult with your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the “Information” page.
..........................................................................................................
026
• Do not put anything that contains water (e.g., flower vases) on this unit. Also, avoid the use of insecticides, perfumes, alcohol, nail polish, spray cans, etc., near the unit. Swiftly wipe away any liquid that spills on the unit using a dry, soft cloth.
..........................................................................................................
001-50
• Connect mains plug of this model to a mains socket outlet with a protective earthing connection.
101a
• The unit should be located so that its location or position does not interfere with its proper venti­lation.
..........................................................................................................
102b
• Always grasp only the plug on the power-supply cord when plugging into, or unplugging from, an outlet or this unit.
..........................................................................................................
103a:
• At regular intervals, you should unplug the power plug and clean it by using a dry cloth to wipe all dust and other accumulations away from its prongs. Also, disconnect the power plug from the power outlet whenever the unit is to remain unused for an extended period of time. Any accumulation of dust between the power plug and the power outlet can result in poor insulation and lead to fire.
..........................................................................................................
104
• Try to prevent cords and cables from becoming entangled. Also, all cords and cables should be placed so they are out of the reach of children.
..........................................................................................................
106
• Never climb on top of, nor place heavy objects on the unit.
107b
• Never handle the power cord or its plugs with wet hands when plugging into, or unplugging from, an outlet or this unit.
..........................................................................................................
108d: Selection
• If you need to move the instrument, take note of the precautions listed below. At least two persons are required to safely lift and move the unit. It should be handled carefully, all the while keeping it level. Make sure to have a firm grip, to protect yourself from injury and the instrument from damage.
1
• Check to make sure the knob bolt securing the
unit to the stand have not become loose. Fasten them again securely whenever you notice any loosening.
• Disconnect the power cord.
• Disconnect all cords coming from external
devices.
• Raise the adjusters on the stand (p. 12).
• Close the lid.
• Remove the music rest.
..........................................................................................................
109a
• Before cleaning the unit, turn off the power and unplug the power cord from the outlet (p. 10).
..........................................................................................................
110a
• Whenever you suspect the possibility of lightning in your area, pull the plug on the power cord out of the outlet.
..........................................................................................................
116
• Be careful when opening/closing the lid so you do not get your fingers pinched (p. 10). Adult super­vision is recommended whenever small children use the unit.
..........................................................................................................
118b
• Keep the included the music rest’s attachment screws, screws of stand, and wing nut in a safe place out of children’s reach, so there is no chance of them being swallowed accidentally.
..........................................................................................................
..........................................................................................................
4

IMPORTANT NOTES

291b
In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 2, 3 and 4, please read and observe the following:

Power Supply

301
• Do not connect this unit to same electrical outlet that is being used by an electrical appliance that is controlled by an inverter (such as a refrigerator, washing machine, microwave oven, or air conditioner), or that contains a motor. Depending on the way in which the electrical appliance is used, power supply noise may cause this unit to malfunction or may produce audible noise. If it is not practical to use a separate electrical outlet, connect a power supply noise filter between this unit and the electrical outlet.
307
• Before connecting this unit to other devices, turn off the power to all units. This will help prevent malfunctions and/or damage to speakers or other devices.
308
• Although the LCD and LEDs are switched off when the POWER switch is switched off, this does not mean that the unit has been completely disconnected from the source of power. If you need to turn off the power completely, first turn off the POWER switch, then unplug the power cord from the power outlet. For this reason, the outlet into which you choose to connect the power cord’s plug should be one that is within easy reach.

Placement

351
• Using the unit near power amplifiers (or other equipment containing large power transformers) may induce hum. To alleviate the problem, change the orientation of this unit; or move it farther away from the source of interference.
352a
• This device may interfere with radio and television reception. Do not use this device in the vicinity of such receivers.
352b
• Noise may be produced if wireless communications devices, such as cell phones, are operated in the vicinity of this unit. Such noise could occur when receiving or initiating a call, or while conversing. Should you experience such problems, you should relocate such wireless devices so they are at a greater distance from this unit, or switch them off.
354b
• Do not expose the unit to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle, or otherwise subject it to temperature extremes. Also, do not allow lighting devices that normally are used while their light source is very close to the unit (such as a piano light), or powerful spotlights to shine upon the same area of the unit for extended periods of time. Excessive heat can deform or discolor the unit.
355b
• When moved from one location to another where the temperature and/or humidity is very different, water droplets (condensation) may form inside the unit. Damage or malfunction may result if you attempt to use the unit in this condition. Therefore, before using the unit, you must allow it to stand for several hours, until the condensation has completely evaporated.
356
• Do not allow rubber, vinyl, or similar materials to remain on the unit for long periods of time. Such objects can discolor or otherwise harmfully affect the finish.
358
• Do not allow objects to remain on top of the keyboard. This can be the cause of malfunction, such as keys ceasing to produce sound.
359
• Do not paste stickers, decals, or the like to this instrument. Peeling such matter off the instrument may damage the exterior finish.

Maintenance

401b
• To clean the unit, use a dry, soft cloth; or one that is slightly dampened. Try to wipe the entire surface using an equal amount of strength, moving the cloth along with the grain of the wood. Rubbing too hard in the same area can damage the finish.
402
• Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration and/or deformation.
403
• The pedals of this unit are made of brass. Brass eventually darkens as the result of the natural oxidization process. If the brass becomes tarnished, polish it using commercially available metal polisher.
For HP103-PE
• Since your piano has a polished finish that is as delicate as that found on finely crafted wooden furniture, it needs careful, periodic care. A few important suggestions concerning the proper care of the unit follow.
•
For dusting, wipe the instrument with a soft cloth that has been soaked with water, then squeezed dry.
Be sure to wipe gently. Even the tiniest grains of sand or grit can leave scratches on the surface if too much force is applied while wiping. Do not use any cleaners or detergents, since they might deteriorate the surface of the cabinet, and produce cracks. Do not use dusting cloths that contain chemicals.
5
IMPORTANT NOTES

Additional Precautions

553
• Use a reasonable amount of care when using the unit’s buttons, sliders, or other controls; and when using its jacks and connectors. Rough handling can lead to malfunctions.
556
• When connecting / disconnecting all cables, grasp the connector itself—never pull on the cable. This way you will avoid causing shorts, or damage to the cable’s internal elements.
557
•A small amount of heat will radiate from the unit during normal operation.
558a
• To avoid disturbing your neighbors, try to keep the unit’s volume at reasonable levels. You may prefer to use headphones, so you do not need to be concerned about those around you (especially when it is late at night).
559b
• When you need to transport the unit, pack it in shock­absorbent material. Transporting the unit without doing so can cause it to become scratched or damaged, and could lead to malfunction.
560
• Do not apply undue force to the music rest while it is in use.
562
• Use a cable from Roland to make the connection. If using some other make of connection cable, please note the following precautions.
• Some connection cables contain resistors. Do not use cables that incorporate resistors for connecting to this unit. The use of such cables can cause the sound level to be extremely low, or impossible to hear. For information on cable specifications, contact the manufacturer of the cable.
565
• Before opening or closing the keyboard lid, always make sure that no pets or other small animals are located on top of the instrument (in particular, they should be kept away from the keyboard and its lid). Otherwise, due to the structural design of this instrument, small pets or other animals could end up getting trapped inside it. If such a situation is encountered, you must immediately switch off the power and disconnect the power cord from the outlet. You should then consult with the retailer from whom the instrument was purchased, or contact the nearest Roland Service Center.
6

Contents

USING THE UNIT SAFELY ........................................3
IMPORTANT NOTES .................................................5
Panel Descriptions....................................................8
Front Panel ..........................................................................................8
Rear Panel............................................................................................9
Before You Start Playing ........................................10
Connecting the Pedal Cord.............................................................10
Connecting the Power Cord ...........................................................10
Opening/Closing the Lid ...............................................................10
Setting Up the Music Rest...............................................................10
Using the Music Holders .........................................................11
Connecting Headphones.................................................................11
Using the Headphones Hook..................................................11
Turning the Power On and Off......................................................11
Adjusting the Sound’s Volume and Brilliance.............................12
About the Pedals ..............................................................................12
About the Adjuster ..........................................................................12
Chapter 1.
Enjoying the Internal Songs and Demo ................13
Listening to Internal Songs.............................................................13
Playing Back All Songs Continuously (All Song Play)........13
Selecting a Song and Playing It...............................................13
Listening to the Demo Songs..........................................................14
Playing Back the Tone Demo Songs.......................................14
Listening to a Demo of the Functions ....................................15
Chapter 2. Performance..........................................16
Chapter 3.
Playing Along with the Internal Songs................. 28
Changing the Tempo .......................................................................28
Adding a Count-in to Match the Timing (Count-In) ...........28
Playing Each Hand Separately.......................................................29
Chapter 4. Recording Your Performance............. 30
Notes Regarding Recording ....................................................30
Recording a New Song....................................................................31
Recording Along with a Song ........................................................32
Selecting and Recording the Track for Each Hand Separately..33
Erasing Recorded Performances....................................................34
Erasing a Performance from the Specified Track .................34
Erasing a Song ...........................................................................34
Chapter 5. Changing Various Settings................. 35
Changing the Damper Pedal’s Resonance....................................35
Making Detailed Settings (Function).............................................35
Tuning to Other Instruments’ Pitches (Master Tuning)......36
Changing the Temperament....................................................36
Setting the Tuning Curve (Stretch Tuning)...........................37
Applying the Damper Pedal to the Left-hand Keyboard
Area.............................................................................................37
Changing How Grand Space is Applied
(Grand Space Mode).................................................................37
Preventing the Settings from Changing During Performance ..38
Disabling Everything Except Piano Play (Panel Lock)........38
Disabling the Buttons When Using a Tone Other Than
Piano (Tone Lock) .....................................................................38
Using the V-LINK function.............................................................38
Performing with a Variety of Sounds ...........................................16
Adjusting the Keyboard Touch (Key Touch)...............................17
Adding a Sense of Depth to the Sound (Grand Space)...............18
Adding the Right Sense of Depth for Headphones
(Grand Space) ...................................................................................19
Adding Liveliness to the Sound (Dynamic Emphasis)...............20
Applying Effects to the Sound .......................................................21
Adding Reverberation to the Sound (Reverb)......................21
Changing the depth of the reverb effect................................21
Transposing the Key of the Keyboard (Transpose).....................22
Playing Two Sounds Together (Dual Play)..................................23
Adjusting the Volume Balance in Dual Play
(Dual Balance)............................................................................23
Playing Different Tones with the Left and Right Hands
(Split Play).........................................................................................24
Changing the Keyboard’s Split Point.....................................25
Using Metronome ............................................................................25
Sounding the Metronome........................................................25
Changing the Metronome Volume.........................................26
Splitting the Keyboard Into Two Sections for Four-Hand
Performances (Twin Piano Mode).................................................27
Chapter 6. Connecting External Devices ............. 39
Connecting to Audio Equipment...................................................39
Connecting to a Computer..............................................................39
Connecting MIDI Devices...............................................................40
What’s MIDI?.............................................................................40
Making MIDI-related Settings........................................................40
MIDI Send Channel Settings ...................................................41
Switching Local Control on and Off.......................................41
Transmitting a Performance You Recorded..........................41
Troubleshooting ...............................................................................42
Appendices............................................................. 42
Error Messages/Other Messages...................................................43
Tone List ............................................................................................44
Internal Song List .............................................................................45
Easy Operation List..........................................................................47
Main Specifications..........................................................................49
Index........................................................................ 50
7

Panel Descriptions

Front Panel

2 3 5 6 7 118 9 10 12 13 16 17 18 19 2014 154
Power On
1
1
[Power On] switch
Turns the power on/off (p. 11).
[Volume] knob
2
Adjusts the overall volume level (p. 12).
[Demo] button
3
You can listen to a demo of the instrument’s tones as well as a demo of the various functions (p. 14).
4
[ (Headphones)] indicator
This indicator lights up when headphones are connected to the headphone jack (p. 11).
[Grand Space] button
5
Adds a sense of depth to the sound (p. 18, p. 19).
[Dynamics] button
6
You can add liveliness to the sound to give it superb clarity and distinctness (p. 20).
7
[Brilliance] button
Adjusts the tone brightness (p. 12).
[Transpose] button
8
Transposes the pitch of the keyboard (p. 22).
[Split] button
9
Divides the keyboard into right-hand and left-hand areas, allowing you to play a different sound in each area (p. 24). By holding down this button and the [Reverb] button, and pressing other specified button, you can make settings for various functions (p. 35–p. 38, p. 40–p.
41).
[Reverb] button
10
Adds reverberation to the sound (p. 21).
11
Tone buttons
They are used to choose the kinds of tones (tone groups) played by the keyboard (p. 16).
Display
12
The display indicates values for various settings, including the tone variation, song number, and tempo. Usually these will appear as in the figure above.
13
[-] [+] buttons
Allow you to select the value of various settings. Pressing both the [-] and [+] buttons simultaneously returns the setting of a particular item or function to its original value.
[Song/Tempo] Button
14
Used to select from the internal songs (p. 13, p. 28). Each time you press this button, the song number and the tempo will be displayed alternately. While the song number is displayed, the button indicator will light in red. While the tempo is displayed, it will light in green.
15
[Metronome/Count In] Button
Turns the metronome on/off (p. 25). Also featured is the count-in sound, which can be played before the song starts, allowing you to begin playing with the song with perfect timing (p. 28).
16
[Play] button
Starts and stops playback of internal songs and recorded performances (p. 13, p. 28). Also starts/stops recording of a performance (p. 31–p.
33).
17
[Rec] button
Puts the HP103 in recording-standby mode (p. 30–p. 34).
18
[Left] button
Plays back or records a performance separately for each hand (p. 29, p. 32–p. 34). The left-hand performances of the internal songs are assigned to this button. This button and the following [Right] button are collectively referred to as the “track buttons.”
19
[Right] button
Plays back or records a performance separately for each hand (p. 29, p. 32–p. 34). The right-hand performances of the internal songs are assigned to this button.
[Key Touch] button
20
Modifies the playing feel of the keyboard (p. 17).
8

Rear Panel

Headphones jack
Front Panel
4.
5.
6.
Rear Panel
Pedal jack
AC inlet
123
Panel Descriptions
1
MIDI Out/In connectors
Connect to external MIDI devices to exchange performance data (p. 40).
Input jacks
2
These jacks can be connected to another sound generating device or an audio device, so that the sound of that device will be output from the HP103’s speakers (p. 39).
3
Output jacks
Allows you to output the piano’s sound to sound reinforcement equipment to obtain a more powerful sound. These can also be connected to a tape recorder or other recording device to record a performance (p. 39).
4
5
6
Headphones jacks
A set of headphones can be connected here (p. 11).
Pedal jack
Connect the pedal cable of the special stand to this jack (p. 10).
AC inlet
Connect the supplied power cord here.
9

Before You Start Playing

Connecting the Pedal Cord

Connect the pedal cord to the Pedal jack on the bottom
panel of the instrument, at the rear.
fig.00-01

Connecting the Power Cord

1.
Insert the included power cord into the AC inlet on the
bottom panel of the instrument, at the rear.
Plug the power cord into a power outlet.
2.
NOTE
Be sure to use the supplied power cord.
fig.00-02

Setting Up the Music Rest

1.
Insert the included music rest attachment screws into
the screw holes on top of the HP103, and tighten the
screws slightly.
fig.00-03
Put the music rest between the screws and the HP103’s
2.
body.

Opening/Closing the Lid

To open the lid, use both hands to lift it lightly, and
slide it away from yourself.
To close the lid, pull it gently toward yourself, and
lower it softly after it has been fully extended.
fig.00-05
NOTE
When opening and closing the lid, be careful not to let your fingers get caught. If small children will be using the HP103, adult supervision should be provided.
NOTE
If you need to move the piano, make sure the lid is closed first to prevent accidents.
3.
While supporting the music rest with one hand, secure
it in place by turning the screws.
When attaching the music rest, support it firmly with one hand to make sure that you don’t drop it. Be careful, so you don’t get your fingers pinched.
4.
To remove the music rest, support it with one hand
while loosening the screws.
After removing the music rest, don’t forget to retighten the screws.
NOTE
Do not apply excessive force to the installed music rest.
NOTE
Be sure to use the supplied screws for attaching the music rest.
NOTE
Before moving the piano, be sure to remove the music rest to prevent accidents.
10
■

Using the Music Holders

You can use the holders to hold pages in place. When not using the holders, leave them folded down.
Before You Start Playing
■

Using the Headphones Hook

Whenever you are not using the headphones, you can hang them on the headphone hook at the lower left of the HP103.
* HP103-PE has not music holders.
fig.mu_stand4

Connecting Headphones

The HP103 has two jacks for plugging in headphones. This allows two people to listen through headphones simultaneously, making it very useful for lessons and when performing piano pieces for four hands. Additionally, this allows you to play without having to worry about bothering others around you, even at night.
Plug the headphones into the Phones jack located at the
bottom left of the piano.
When headphones are connected, the [ (Headphones)] indicator (p. 8) lights up, and sounds stop playing from the speakers of the HP103. The headphone volume is adjusted by the [Volume] knob (p. 12) of the HP103.
fig.00-04.e
Phones jack x 2
NOTE
Use Stereo headphones.
Attaching the Headphone Hook
Press and twist the headphone hook included with the HP103 into the hole in the bottom of the HP103 (refer to the figure below). Turn the wing nut of headphone hook to secure the headphone hook.
Wing Nut
Headphone Hook

Turning the Power On and Off

NOTE
Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.
To turn the power on, turn the [Volume] knob all the
way down, and then press the [Power On] switch.
The power will turn on, and the Power indicator at the left front of the HP103 will light. After a few seconds, you will be able to play the keyboard to produce sound. Use the [Volume] knob to adjust the volume.
* This unit is equipped with a protection circuit. A brief interval
(a few seconds) after power up is required before the unit will
operate normally.
fig.00-06.e
Power On
Some notes on using headphones
• To prevent damage to the cord, handle the headphones only by the headset or the plug.
• Connecting the headphones when the volume of connected equipment is turned up may result in damage to the headphones. Lower the volume on the HP103 before plugging in the headphones.
• Listening at excessively high volume levels will not only damage the headphones, but may also cause hearing loss. Use the headphones at a moderate volume level.
Power Indicator
To turn the power off, turn the [Volume] knob all the
way to the left, and press the [Power On] switch.
The Power indicator at the left front of the HP103 will go dark, and the power will be turned off.
* If you need to turn off the power completely, first turn off the
[POWER] switch, then unplug the power cord from the power outlet. Refer to “Power Supply” (p. 5).
11
Before You Start Playing
Soft Pedal
Sostenuto Pedal
Damper Pedal

Adjusting the Sound’s Volume and Brilliance

Turn the [Volume] knob to adjust the overall volume.
Press the [Brilliance] button to adjust the brightness of
the sound.
Select one of the three available settings to obtain the desired brilliance.
[Brilliance]
button’s indicator
Brilliance
fig.00-07.e
Min Max
Off Lit in red
Medium Mellow Bright
green

About the Pedals

The pedals have the following functions, and are used mainly for piano performance.
fig.00-08.e
Lit in

About the Adjuster

When you move the HP103 or if you feel that the pedals are unstable, adjust the adjuster located below the pedals as follows.
❍
Rotate the adjuster to lower it so that it is in firm contact with the floor. If there is a gap between the pedals and the floor, the pedals may be damaged. In particular when placing the instrument on carpet, adjust this so that the pedals firmly contact the floor.
fig.00-09.j
Adjuster
If the adjuster is difficult to turn, have one person lift either the left or right side of the stand to make it easier for another person to turn the adjuster and make the adjustment.
NOTE
After adjusting the adjuster, press the pedals, and if the front board moves, turn the adjuster further so that it makes firm contact with the floor.
Damper pedal (right pedal)
While this pedal is pressed, notes will be sustained even after you take your fingers off the keys.
On an acoustic piano, holding down the damper pedal will allow the remaining strings to resonate in sympathy with the sounds that you played from the keyboard, adding a rich resonance.
The HP103 simulates this damper resonance.
You can change the amount of resonance applied with the damper pedal. Please refer to “Changing the Damper Pedal’s Resonance” (p. 35).
Sostenuto pedal (center pedal)
This pedal sustains only the sounds of the keys that were already played when you pressed the pedal.
NOTE
Always readjust the adjuster after moving the piano.
Soft pedal (left pedal)
When you hold down this pedal and play the keyboard, the sound will have a softer tone.
12
Chapter 1.
A
Enjoying the Internal Songs and Demo

Listening to Internal Songs

The HP103 comes with 66 piano songs onboard.

Playing Back All Songs Continuously (All Song Play)

■
The internal songs can be played back consecutively.
fig.panel1-1
1
Hold down the [Song/Tempo] button, and press the [Play] button.
The [Song/Tempo] button’s indicator will light in red, the [Play] button’s indicator will blink, and the songs will play back successively, starting with the currently selected song. The song number appears in the display for several seconds.
You can press the [-] or [+] button to select the song that you want to play back. When all songs have been played, playback will return to the first song and resume.
“Chapter 3. Playing Along with the Internal Songs” (p. 28)
“Internal Song List” (p. 45)
12
When you play back an internal song, the reverb effect will automatically be turned on (the button’s indicator lights).
Stopping the playback
2
Press the [Play] button.
Playback will stop.
■

Selecting a Song and Playing It

fig.panel1-2
3, 42 1
Choosing the song to play back
1
Press the [Song/Tempo] button, getting its indicator to light in red.
The song number appears in the display for several seconds.
fig.disp-USr
2
Press the [-] or [+] button to select a song.
Holding down the button causes the numbers to change continuously.
Playing back
bout the display for the
internal songs
USr (user) … The location where you can record your performance. (For details on recording → p. 31) Numbers with a “S.” … internal songs.
3
Press the [Play] button.
The button’s indicator will light, and the selected song will play.
13
Chapter 1. Enjoying the Internal Songs and Demo
Stopping the playback
4
Press the [Play] button.
The button’s indicator goes out, and playback stops. The next time you press the [Play] button, the song that was stopped is played from the beginning.

Listening to the Demo Songs

You can listen to various demo songs, including those demonstrating the piano and other tones, as well as the function applied to the piano tones.
■

Playing Back the Tone Demo Songs

fig.panel1-3
1, 2
1
Press the [Demo] button.
The button’s indicator flashes, and playback of the tone demo songs starts.
When playback of the last song is finished, playback then returns to the first song.
When you press any of the tone buttons while the [Demo] button is flashing, the demo song corresponding to that tone button is played.
Button assigned tone demo
[Piano]
[E. Piano]
[Harpsi]
[Organ]
[Strings]
Piano tone demo songs
E. Piano tone demo songs
Harpsichord tone demo songs
Organ tone demo songs
Strings tone demo songs
Demo content
[Split]
Stopping the Tone Demo Songs
2
Press the [Demo] button.
The [Demo] button’s indicator goes off, and the demo quits.
14
Demo songs using the Split function (p. 24)
Chapter 1. Enjoying the Internal Songs and Demo
When you press the button pressed in Step 2, you can switch between demos both with the function switched on and off.
■

Listening to a Demo of the Functions

You can listen to the demo of the functions that can be applied to the piano tones.
fig.panel1-3
1, 3
1
2
2
Press the [Demo] button.
The button’s indicator flashes, and playback of the tone demo songs starts.
Press any of the following buttons.
Button assigned function demo
[Grand Space]
[Dynamics]
When a button is pressed, the demo assigned to the button is played. Two versions of the demo will be played—one includes the function provided by the button you’ve pressed, the other doesn’t.
Grand Space demo
Dynamic Emphasis demo
Demo content Page
p. 18 p. 19
p. 20
Stopping the Demo of the Functions
3
Press the [Demo] button.
The [Demo] button’s indicator goes off, and the demo quits.
15

Chapter 2. Performance

When Dual play (p. 23) or Split play (p. 24) is used, only sound number 1 or 2 can be selected. If you use Dual play or Split play with a Tone button for which tone number 3 or 4 is selected, tone number 1 will be selected for that Tone button.

Performing with a Variety of Sounds

The HP103 contains 20 different internal tones. The tones are organized into five tone groups, which are assigned to the Tone buttons.
fig.panel2-1
1 2
Selecting a tone group
Press any Tone button.
1
The indicator of the button you pressed will light.
When you play the keyboard, you will hear a sound in the selected tone group.
Selecting variation tones
2
Press the [Variation] button.
Four different tones (numbered 1–4) are assigned to each Tone button. Use the [Variation] button to select among them.
Each time you press the [Variation] button, the button’s indicator will change color, and the four sounds will be selected successively.
Tone number
[Variation] button’s indicator
Some of the number 3 and 4 tones form pairs, which can be layered and sounded together.
The tone you’ve selected is heard when you finger the keyboard.
1 2 3 4
Dark
Red Green Orange
For more details, refer to “Tone List” (p. 44).
16

Adjusting the Keyboard Touch (Key Touch)

You can adjust the touch (playing feel) of the keyboard.
fig.panel2-7
Press the [Key Touch] button.
1
The button’s indicator will light, and the feel of the keyboard will change.
Each time you press the [Key Touch] button, the button’s indicator will change color, and the feel of the keyboard will change.
Chapter 2. Performance
1
Indicator
OFF
Red
Green
Orange
Settings
Medium
Heavy
Light
Fixed
This allows you to play using the most natural touch. This is the closest to the touch of an acoustic piano.
Fortissimo (ff) cannot be produced unless you play more strongly than usual, making the keyboard feel heavier. Dynamic fingering adds even more feeling to what you play.
Fortissimo (ff) can be produced by playing less strong­ly than usual, making the keyboard feel lighter. This setting makes it easy to play, even for children.
Sounds at a fixed volume, regardless of your keyboard playing strength.
17
Loading...
+ 39 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use