Roland Corporation CD-2E Quick Start
The CD-2e makes it easy to capture your performances and write them to an audio CD. In Section 1,
we’ll show you how to use the CD-2e’s built-in microphone to record a performance to an SD memory
card. Then, in Section 2, we’ll show you how to write your recorded performance onto a CD.
Let’s Record to
an SD Memory Card
1
Connect the included power cord to the dedicated AC adaptor.
On the CD-2e’s rear panel, move
the [POWER] switch to the “ON” position.
Insert the SD memory card into the card
slot on the left side panel.
(An SD memory card is included in the CD-2e box.)
Firmly insert the
card all the way.
When the CD-2e recognizes
the card, the following screen
is displayed:
2
Dedicated AC Adaptor (included)
Media to
Prepare
Power cord (included)
* The shape of the power cord’s plug varies
depending on the country.
Press the [ (Record)] button.
Blink
Press the [ (Play)] button.
Lit
SD memory card
To power outlet
The button’s light blinks red,
indicating that the CD-2e is
standing by for recording.
The CD-2e starts recording.
Begin your performance.
Set the two switches on the left side.
Set the [MIC SELECT] switch to the “INT”
1
position.
Set the [MIC LEVEL] switch to the “MANUAL”
2
position.
While producing the sound that you’ll
actually be recording, turn the [MIC] knob
to adjust the input level.
Adjust the level so that the peak indicator located above
the [MIC] knob lights briefly at the loudest moments of
the performance or vocal you’ll be recording.
LouderQuieter
Peak indicator
Copyright © 2007 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form
without the written permission of ROLAND CORPORATION.
Press the [ (Stop)] button.
Turn off
The CD-2e stops recording.
Press the [ ] [ ] buttons to select
the desired song.
Press the [ (Play)] [ (Stop)] buttons
to start and stop playback.
* To record additional performances, repeat Steps 4–7.
Once you’ve finished recording, proceed to the
other side of this sheet to learn how to write a CD.
● For additional details on recording using the built-in
microphone, see page 36 of the CD-2e Owner’s Manual.
Let’s Create a CD
Media to
Prepare
Blank CD-R disc
Press the [MENU] button to access the menu screen, and choose “Write (SD→CD)?”
Press the [MENU] button to
access the menu screen.
As the screen instructs, insert the CD into
the CD slot located on the right side panel.
Insert the CD with its label surface facing upward.
When you see this screen,
press the [ENTER] button.
Use the [ ] [ ] buttons to
choose “Write (SD → CD)?”
Press the [ENTER] button
to confirm your choice.
If you’re sure you want to proceed,
press the [ENTER] button.
The CD-2e begins
writing a CD.
Please wait.
The disc will be ejected automatically when
CD writing is completed.
* If you’re using the included SD memory card, the sample songs it
contains will also be written onto the CD.
* You can also select the songs to be written. For details on how to do
this, see page 79 in the CD-2e Owner’s Manual.
Now you have a CD of your performance!!
f you’re sure you want to proceed,
press the [ENTER] button.
Insert the CD into the CD slot.
When the CD-2e recognizes the CD-R disc as an
audio CD, the following screen is displayed:
When the FINALIZE screen appears,
press the [ENTER] button.
● For detailed instructions on writing CDs, see page 79–81 of the CD-2e Owner’s Manual.
“CD” appears on the left side of the screen.
Press the [ (Play)] [ (Stop)] buttons
to start and stop playback.
When you see this
screen, press the
[EXIT] button to end
the procedure.
*04892545-01*
04892545 07-09-1N
Loading...