V-Piano
© 2009
* |
5 |
1 |
0 |
0 |
0 |
0 |
7 |
3 |
7 |
5 |
- |
0 |
1 |
* |
V-Piano
V-Piano V-Piano USBV-Piano
USB
USB MIDI
V-Piano
...
● V-Piano V-Piano
CD-ROM ReadMeJ.txt
●
●
1CD-ROM
2CD-ROM Installer setup.exe Mac OS X V-Piano Editor Installer.pkg
Windows XP |
Windows Vista |
Mac OS X |
3
V-Piano
● Windows XP Windows Vista
→V-Piano Editor→V-Piano Editor
● Mac OS X
Roland V-Piano Editor
Microsoft Windows Microsoft Corporation
Windows® Microsoft® Windows® operating system
Apple Macintosh Mac OS Apple Inc.
V-Piano
V-Piano
V-Piano
V-Piano V-Piano→V-Piano Editor
MIDI
V-Piano MIDI
V-Piano MIDI V-Piano
Input/Output V-Piano MIDI
Windows Vista
Through Input/Output
MIDI
V-Piano
V-Piano ReadV-Piano V-Piano
V-Piano Editor
Installation Guide
Copyright © 2009 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.
What is V-Piano Editor?
V-Piano Editor is software that allows you to use your personal computer to customize the V-Piano’s tone parameters in real time—after you have connected the V-Piano to your computer using a USB cable.
USB Cable
To USB MIDI connector
Computer
Installing V-Piano Editor
Before you begin the installation...
Please take note of the following things
●Check to make sure that your computing environment meets the requirements for V-Piano Editor. Refer to “ReadMeE.txt” on the CD-ROM for details.
●Make sure to close all software, including virus protection software and any other resident programs.
●You must log on to your computer using an account that has administrative privileges.
1 Insert the supplied CD-ROM into your computer.
2 Double-click “setup(.exe)” (or, in Mac OS X,“V-Piano Editor Installer.pkg”), which can be found in the “Installer” folder on the CD-ROM.
Windows XP users |
Windows Vista users |
Mac OS X users |
3 Perform the installation by following the instructions that appear on screen.
Starting up V-Piano Editor
● With Windows XP or Windows Vista
From the Start menu, click “All Programs” – “V-Piano Editor” – “V-Piano Editor.”
● With Mac OS X
Double-click the icon in the “Roland” – “V-Piano Editor” folder, located within “Applications.”
*Microsoft and Windows are registered trademarks of Microsoft Corporation.
*Windows® is known officially as:“Microsoft® Windows® operating system.”
*Apple, Macintosh and Mac OS are registered trademarks of Apple Inc.
*All product names mentioned in this document are trademarks or registered trademarks of their respective owners.
Before you begin using the software
Using V-Piano Editor
Refer to the online documentation for the V-Piano for instructions on how to customize tones using V-Piano Editor.
Once V-Piano Editor has been launched, all you need to do to view the online documentation is to select “Help–V-Piano Editor Manual.”
Concerning the MIDI settings
You’ll need to make the settings necessary for using MIDI the first time that you launch V-Piano Editor.
In V-Piano Editor, under “Set Up MIDI Devices,” you need to select the V-Piano’s MIDI ports for the Input/Output of the V-Piano.
*The above depicts what you should see in Windows Vista.
*Do not select anything for the Input/Output of “Through.”
*The settings necessary to use MIDI need to be made only once, immediately after you have started up the software for the first time.
Loading the V-Piano’s tone settings
Before you start customizing any tones using V-Piano Editor, you first need to acquire all the settings for tones that are stored inside the V-Piano itself.
After starting up V-Piano Editor, the first thing you need to do is click the [Read] button. When you do this, all the tone settings stored inside the V-Piano instrument will be loaded into V-Piano Editor.