Page 1
®ÂØÒňÎ
®
CDX-1
DiscLab
It’s a Fact…
The Roland CDX-1 DiscLab is the first product of its
kind: a powerful new instrument that combines a
professional-quality phrase sampler and multitrack
recorder with a built-in CD burner. Features include:
• CD-RW recorder with 8 audio tracks
• Remix-oriented phrase sampler with 8
assignable pads per bank—64 banks total—for
up to 512 samples per disk
• Sampling from analog or digital inputs or directly
from audio CDs
• Load .WAV files directly from CDR
• Automatic tempo calculation and display
• Resampling and time-stretching
• Built in 4-track pad sequencer for sample
playback
• Rhythm Guide and scrubbing
• Complete mixdown and CD-burning capability
including Mastering Tool Kit effect algorithm
• Insert and loop effects that utilize Roland’s
COSM™ technology such as guitar and bass
modeling, delay, reverb and more
TurboStart
Loading a .WAV file
Use the following procedure to load a sample from
any CD-R that contains .WAV files:
1. Insert a CD that contains .WAV files.
2. Press TEMPO MATCH/ PAD EDIT.
3. Press several times to highlight “LOAD
WAVE FILE.”
4. Press ENTER.
5. Use the CURSOR buttons and TIME/VALUE dial
to select the pad bank and pad number into
which you want to load the sample.
6. Press ENTER to open the file directory.
7. Use the CURSOR buttons to highlight any folder
that contains .WAV files.
8. Press ENTER to open the folder.
9. Use the CURSOR buttons to highlight any file
that has a .WAV extension.
10. Press PLAY to audition the sample.
11. Press ENTER to load the sample into the
selected pad.
Sampling from an Audio CD
Playing the Demo Songs
Use the following procedure to load and play the
demo songs from the disk supplied with the CDX-1:
1. Insert the demo CD into the CDX-1.
2. Press PLAY.
3. Use the AUDIO TRACKS faders to adjust the
volume levels for the individual tracks.
4. Use the MASTER fader to adjust the overall
volume.
5. Press STOP to stop playback.
6. Press SEARCH to advance to the next demo
song, and press PLAY to start playback.
Playing Samples
Use the following procedure to select from the 64 pad
banks and to trigger samples:
1. Press the PAD BANKS 1-64 button.
2. Turn the TIME/VALUE dial to select the desired
pad bank.
3. Press ENTER.
4. Press any of the lit pads to trigger its sample.
To sample from an audio CD:
1. Insert a CD audio disc.
2. Press PAD REC.
3. Press the pad into which you want to sample so
that the pad 's blinking.
4. Press PLAY, and then bring up the AUDIO
TRACKS Faders 7 and 8 to set the record level.
5. Press PAD REC to begin sampling.
6. Press PAD REC to finish sampling.
7. Press STOP to stop playback of the CD.
8. Press the lit pad to play back the sample.
Inserting Effects on the Guitar Input
Use the following procedure to insert an effect on the
CDX-1's MIC2/Gtr/Bs input:
1. Plug a guitar into the MIC2/Gtr/Bs input on the
rear of the CDX-1.
2. Press the MIC2/Gtr/Bs INPUT SELECT button
so that it's lit to turn on the input.
3. Adjust the middle SENS knob—for
GUITAR/BASS—until the red clipping LED
flashes occasionally when the instrument is
played at its highest level.
4. Turn the INPUT REC LEVEL knob to about 12
o'clock, halfway between MIN and MAX.
TBS151 © 2001 Roland Corporation U.S., 5100 S. Eastern Ave., Los Angeles CA 90040 Faxback # 20184 Page 1
Page 2
®ÂØÒňÎ
®
CDX-1
DiscLab
5. Press the INSERT EFFECTS ON/OFF button so
that it's lit.
6. Press the PATCH button.
7. Press or to select GROUP, and turn the
TIME/VALUE dial to select COSM GUITAR
AMP.
8. Press to select PATCH, and turn the
TIME/VALUE dial to choose a guitar effect.
Recording an Audio Track
Note: To perform this procedure, a high-speed
CD-RW must be pre-formatted by the CDX-1 in order
to prepare it for recording To learn how to format a
CD-RW, see the CDX-1 Owner's Manual.
Use the following procedure to record a performance
onto an audio track in the CDX-1:
1. Insert a pre-formatted high-speed CD-RW into
the CDX-1.
2. Follow the steps in "Inserting Effects on the
Guitar Input" on the previous page to prepare
your signal fro recording.
3. Press the STATUS button of the track on which
you wish to record so that the button blinks red.
4. Raise the track's fader and the MASTER to the
"0" mark.
5. Press REC and PLAY to start recording.
6. Press STOP when you're finished recording.
7. Press ZERO, followed by PLAY to listen to the
recorded track. Adjust the position of the track’s
fader to set the desired listening level.
TurboStart
TBS151 © 2001 Roland Corporation U.S., 5100 S. Eastern Ave., Los Angeles CA 90040 Faxback # 20184 Page 2
Loading...