Roku S325-CA User Manual

Hi! Let’s get started.

3-Series S325-CA

DO NOT RETURN TO STORE

WE ARE READY TO

HELP

with any questions

TAKE CARE WHEN REMOVING THE TV

TCL SUPPORT:

www.TCLCANADA.com/support

1-877-300-8837

Important Information

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualiﬁed service personnel.

This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury.

WARNING

To reduce the risk of ﬁre or electric shock, do not expose this product to rain or moisture. This product should not be exposed to dripping or splashing. No objects ﬁlled with liquids, such as vases, should be placed on the apparatus.

This symbol indicates that this product incorporates double insulation between hazardous main voltage and user accessible parts. When servicing, use only identical replacement parts.

This symbol indicates important instructions accompanying the product.

WARNING

The TV is unstable if it is not properly attached to the base or mounted to the wall. Please follow the base or wall mounting instructions provided in the User’s Guide to ensure your safety.

Warning: The batteries shall not be exposed to excessive heat such as sunshine, ﬁre or the like.

Refer to the identiﬁcation/rating label located on the back panel of your product for its proper operating voltage.

Cable TV Installer:

Electrical Code (Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper grounding and, in particular, speciﬁes that the cable ground should be connected to the grounding system of the building as close to the point of cable entry as practical.

This reminder is provided to call your attention to Article 820-40 of the National

Important: This television is a table model and is designed to sit on a ﬁrm, ﬂat surface. Don’t place

the TV on soft carpeting or similar surface because the ventilation slots on the bottom of the unit will be blocked, resulting in reduced lifetime from overheating. To assure adequate ventilation for this product, maintain a spacing of 1 inch from the top and side of the TV receiver and 2 inches from the rear of the TV receiver and other surfaces. Also, make sure the stand or base you use is of adequate size and strength to prevent the TV from being accidentally tipped over, pushed o, or pulled o. This could cause personal injury and/or damage to the TV. Refer to the Important Safety Instructions on the next page. The Power button on this TV and your remote control puts the TV into a very low-power standby mode but will not completely turn the power o. In order to completely shut the power o, you will need to disconnect the power cord from the outlet. The mains plug/appliance coupler is used to completely turn o the device. If you prefer to completely turn o the device, you should install the TV in a manner that allows you to disconnect the power cord when desired.

Product Registration

Please register your TCL TV purchase on-line at www.tclcanada.com. It will make it easier to contact you should it ever be necessary. Registration is not required for warranty coverage.

Product Information

Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers in case you need them. These numbers are located on the product. Warning: Changes or modiﬁcations to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Keep the apparatus at least 8 inches away from the human body.

Input Signal Compatibility

Antenna/Cable Composite Video HDMI

For the best viewing experience, remove the energy guide label from the TV front panel or TV screen before use.

Model No. Serial No. Purchase Date Dealer/Address/Phone

480i, 480p, 720p, 1080i (NTSC, ATSC, and QAM formats) 480i, 576i 480i, 480p, 720p/60Hz, 1080i/60Hz, 1080p/60Hz, 576i/p, 1080i/p/50Hz

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.

9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

10. WARNING: Please refer the information on exterior bottom enclosure for electrical and safety information before installing or operating the apparatus.

11. WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily operable.

12. When not in use and during movement, please take care of the power cordset, e.g. tie up the power cordset with cable tie or something like that. It shall be free from sharp edges and the like that can cause abrasion of the power cordset. When put into use again, please make sure the power cordset being not damaged, If any damages found, please look for the service person to replace the power cordset speciﬁed by the manufacturer or have the same characteristics as the original one.

13. No naked ﬂame sources, such as lighted candles, should be placed on the apparatus.

14. Unplug this apparatus during lightning storms or when unused for long periods of time.

15. Only use attachments/accessories speciﬁed by the manufacturer.

16. Use only with the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

17. Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

18. For safe operation of the apparatus, observe these installation requirements: Keep at least 2 inches of ventilation space between the rear cover of the apparatus and the wall. Keep at least 1 inch of ventilation space between the apparatus and all other surfaces. Do not allow any of the apparatus’ ventilation openings to be blocked by objects that might obstruct them, such as; newspapers, curtains, table-cloths or any other objects. Do not expose the apparatus to any external heat sources. Do not place any heat sources such as candles, lamps, etc. on the apparatus. Do not expose the device to high levels of humidity or to any possible sources of moisture. When disposing of used batteries from the remote control, consult local regulations regarding proper disposal.

19. If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70-2011 (Section 54 of Canadian Electrical Code, Part 1) provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead in wire to an antenna-discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See following example:

ELECTRIC SERVICE EQUIPMENT

ANTENNA LEAD IN WIRE

GROUND CLAMP

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PARTH)

What’s in the box

TCL · Roku TV Power cable

M5X25mm for models

”

of 49

ST4X20mm for models of 32 ST4X25mm for models of 40 /43

4 x Stand screws

TV stands AV Input cable adapter

” ” ”

(For 32S327/40S325/43S325/49S325)

2 x AAA batteries

TV remote

for remote

What you need

Make the most of your Smart TV

Phillips head

screwdriver

Router + Internet Connection

(needed for streaming)

For additional support, please see User Manual at: www.TCLCANADA.com/support

Key things to know: A paid subscription or other payments may be required for some streaming channels.

Channel availability subject to change and varies by country.

Step 1 Set up your TV

Ready for the step-by-step? You’re only minutes away from TV bliss!

Remove your TV from the box

Be careful, it’s heavy!

To use the stand

To prevent damage to the screen, carefully place your TV on a soft, cushioned surface.

Put the column of the stands into the TV, align the stands with the screw holes located on the TV. Secure the stands to the TV with four (4) screws.

Screws

(ST4X20mm for 32”)

(ST4X25mm for 40”/43”)

(M5X25mm for 49”)

Stand

o mount

If you are mounting your TV to the wall, don’t attach the stands.

Models of 32”

Models of 40” or 43”

Models of 49”

The VESA number is the horizontal and vertical measurement of the mounting holes. For example, 200X200 refers to the fact that the mounting measurements are 200mm horizontally and 200mm vertically. Follow the instructions that come with the wall mount. Your wall mount must be able to bear a minimum of ﬁve times the TV’s net weight to avoid causing damage.

on a wall

To mount your TV to the wall, purchase a VESA wall mount

Purchase a VESA 100x100 (4 M4x10mm screws)

Purchase a VESA 100x100 (4 M6x12mm screws)

Purchase a VESA 200x200 (4 M6x12mm screws)

Warning:

Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

- Using cabinets or stands recommended by the manufacturer of the television set.

- Only using furniture that can safely support the television set.

- Ensuring the television set is not overhanging the edge of the supporting furniture.

- Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.

- Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture.

- Educating children about the dangers of climbing on furniture to reach the television set or its controls. If your existing television set is being retained and relocated, the same considerations as above should be applied.

Step 25Power up

In this step, we’ll make sure all systems are GO!

Power your TV remote by inserting the included batteries.

Connect your power cable to the TV, then plug it in to the wall outlet.

Connect other devices by referencing port label and descriptions on the bottom of page 6.

Insert batteries in the correct polarity as indicated in the battery compartment.

Power Tip!

batteries from the same manufacturer. Never use damaged batteries. If your remote gets warm/hot during use, discontinue use and contact customer support immediately at www.TCLCANADA.com/support.

Step 3

Always replace depleted batteries with two same brand-new

Grab your remote

The TV remote should feel right at home in your hand. We designed it to be incredibly intuitive for watching TV and navigating on-screen menus.

Here’s some buttons you should know about.

POWER

Turn TV on and o

BACK Return to previous screen

HOME Return to Roku Home screen

VOLUME Raise and lower volume

INSTANT REPLAY Replay the last few seconds.

OPTIONS View more options

RWD SCAN Rewind streaming video, scroll left one page

at a time

FWD SCAN Fast forward streaming video, scroll right one page

at a time

E F

Tip! The button gives

you easy access to picture settings, display options, and more. Try it on every screen!

A C

Step 46Get to know your TV

STATUS LIGHT Glows when

the TV is in standby, ﬂashes when the TV is busy, ﬂashes

TV FRONT

once with each button press of the remote control.

IR RECEIVER Receives signal

from the TV remote.

POWER and OPTIONS BUTTON

Found on the bottom surface of the TV for easy use.

POWER PORT Connect your

TV to the power source with the included power cable.

32S327/40S325/

43S325/49S325

TV BACK

RESET BUTTON Press once to restart your TV.

Press and hold for factory reset, and careful, you will lose all your settings!

USB PORT Connect a USB device to access photos,

music and movies.

PORTS Highest quality audio/video connection.

3 HDMI

Connect cable box, Blu-ray player, gaming console, or other devices to your TV using HDMI cables.

HDMI ARC PORT Connect HDMI ARC (audio return

channel) capable audio devices like sound bars or AV receivers.

ANTENNA/CABLE IN Connect an outdoor VHF/UHF

antenna or Cable TV feed.

AV IN adapter AV Input (analog audio/video)

Use the supplied adapter to connect to older devices that use analog audio/video outputs. The supplied adapter connects to the RCA cable (video - yellow and audio - white and red) that you normally use to connect to that device.

AV IN If your device isn’t able to connect using HDMI®,

connect to your TV using standard red/white/yellow cables.

HEADPHONE OUT Connect headphones or other

external speakers.

OPTICAL (DIGITAL AUDIO OUT) Connect an optical

cable to an external digital audio system.

32S321/32S325

TV BACK

TV SIDE

G/F

For 32S327/40S325/

43S325/49S325

TV SIDE

OPTICAL

AUDIO

OUT

RESET

AUDIO

VIDEO

AV IN

CABLE/

ANT

G/F

ARC

USB

For 32S321/32S325

Step 5

Complete guided setup

It’s the ﬁnal stretch-hurray!

Let’s Connect

Your TV will automatically detect wireless networks in your area. Have your network name and password handy and follow the easy on-screen instructions.

Your Roku account: Once connected, your TV will walk you through a guided setup,

where you'll be prompted to create (or sign into) your

free Roku account online at roku.com/link. Your TV will generate a unique code

that links your TV to your account.

Roku accounts are free, and while a valid credit card is recommended, it is not required. If you choose to register with a credit card, you will be able to seamlessly rent movies, TV shows and download apps without having to enter in your credit card information each time. A unique PIN can be added to the account to prevent unauthorized purchases.

IMPORTANT: Make sure you type roku.com/link into the browser being careful not to

misspell or add extra characters. Typing this incorrectly may take you to fraudulent websites.

Once you’re connected, your TV will automatically update with the latest software—plus you can start streaming the entertainment you know and love. Unlike other TVs, your new TCL • Roku TV automatically receives regular software updates in the background when it’s connected to the internet. This allows it to give you a better and better experience.

If you aren’t ready to connect your TV to a wireless network, you can still use it as a regular TV.

And setup is done…congratulations!

Continue using the remote to personalize your Home screen and channel line-up, stream movies, and so much more.

If you have an antenna or cable connected, just click the tuner tile to watch broadcast TV channels. The fun has just begun!

WE ARE READY TO HELP

TCL SUPPORT:

www.TCLCANADA.com/support

1-877-300-8837

+ 19 hidden pages