Roku 2400X User Manual
Hi!
Let’s get started.
WHAT’S IN THE BOX
Roku player Remote control
2 x AAA
batteries for
remote
A/V cable
RCA to 3.5mm
Power adapter
GET TO KNOW YOUR ROKU
A
B
Front view
F
Back view
C
D
E
Status light – Flashes slowly when the Roku player starts up. Glows when
A
it’s on. Flashes once with each press of the remote control.
IR receiver – Receives signal from the included Roku remote.
B
HDMI port – Connects your Roku player to an HDTV with an HDMI cable
C
(not included).
A/V port – Connects your Roku player to a TV with the included A/V
D
cable (3.5mm to RCA). Provides standard definition quality only.
Power port – Connects your Roku player to a 120V AC power source with
E
the included power adapter.
Reset button – Resets your Roku player to its original factory settings
F
when pressed and held for 10 seconds (a feature you’ll rarely, if ever, use).
DID YOU NOTICE? Your Roku player has no on/o switch. It’s simpler that
way and draws very little power—less than a nightlight! Keep it plugged in so
that it can download the latest software updates automatically.
What You NEED
Roku player
A/V cable
(included)
Wireless router
(any Wi-Fi)
(HD or standard definition)
TV
OR
HDMI cable
(sold separately)
High-speed Internet connection
(DSL or cable modem)
WHAT TO DO STEP 1
Ready for the step-by-step? We’ve only got four…
CONNECT YOUR PLAYER
Connect your Roku player to your TV in one of two ways:
HIGH DEFINITION: If you have an HDTV and want the best picture quality, use an
HDMI cable (not included) to make the connection depicted in the diagram below:
• Connect one end to the HDMI port on the back of your Roku player.
• Connect the other end to an open HDMI port on your TV.
DID YOU KNOW? Because HDMI outputs digital video and audio, you don’t
need a separate audio cable. HDMI also supports 5.1 surround sound (where
available). GOT A RECEIVER? You can also use HDMI to route video and audio
directly through your receiver if it supports HDMI video pass-through.
Loading...