Roksan Audio KMA-2, KMA-3 User Manual

Kandy

POWER AMPLIFIER

KMA - 2/3

USER MANUAL

ROKSAN AUDIO LIMITED

6 NORTHFIELD INDUSTRIAL ESTATE
BERESFORD AVENUE ALPERTON
MIDDLESEX HA0 1NW ENGLAND

TEL. [phone]
[phone]
FAX. [phone]

INTRODUCTION Kandy Power Amplifier 2/3 Channel

Congratulations on your purchase of the ROKSAN Kandy Power Amplifier (2/3 Channel). This power Amplifier is
designed and manufactured to the highest specification and rigorously tested to offer you many years of trouble­free pleasure.

Your Kandy Amplifier is at the heart of your Hi-Fi / Audio-Visual system. Its correct installation, set-up and
operation will have a profound influence on the sonic performance of the entire installation.

Please read the contents of this manual thoroughly. It will help you to understand better your Hi-Fi / Audio-Visual
equipment and enhance your listening pleasure.

This manual is divided into the following sections:

• Safety Instructions (Accompanying card)

• Introduction

• Cautions

• Installation

• Set-up

• Operation

• Troubleshooting

• Guarantee

• Specifications

• Notes

UNPACKING

Included in the packing of your Kandy Amplifier you will find:

• One mains lead fitted with the correct mains power plug for your country

• One information pack and warranty card

After removing these items please retain all packing materials. Correct packing is necessary for future
transportation of your Kandy Amplifier.

MAINTENANCE

After disconnecting the Kandy Amplifier from the mains supply, the cabinet and front panel may be cleaned with
a lightly dampened soft cloth or chamois leather. Avoid using abrasives or solvents.

EU DIRECTIVES

This product is designed to comply with the legal provisions of EU Directives 89/3336/EC and 72/23/EC. The
standards which have been applied are those which were in force at the time of the introduction of this product.

This product bears the CE mark.

This product is compliant to EN 60065.
This product must be earthed. Please ensure that other equipment connected to it is earthed according to the
manufacturer’s instructions.

Roksan Audio ltd Kandy Power Amplifier 2/3 Channel User Manual

CLASSIFICATION: General Use Version 1.0

All specifications are liable to change without notice. E&OE Page 2 of 10 ENGLISH

CAUTIONS Kandy Power Amplifier 2/3 Channel

AC MAINS SUPPLY

Your Kandy Amplifier is set to operate from a fixed supply voltage which is marked on a label next to the mains
input plug. Before connecting the mains lead please check that your mains supply corresponds to this label as
below:

230V Products ………………………………….Voltage Range: 220V – 240V
115V Products ………………………………….Voltage Range: 100V – 120V

The mains lead supplied with this product has an IEC mains socket that plugs into the IEC connector on the
unit’s rear panel. The other end is normally attached to the appropriate mains plug for your country. In the UK
this is the standard UK13A plug.

This plug should ordinarily not be removed from the lead. If you do remove it, please dispose of it safely so that it
cannot be plugged into a mains socket whilst in a potentially dangerous condition. We suggest that you obtain
from your dealer a complete replacement lead.

Should you move to another area where either the mains voltage or the mains plugs are different from those as
supplied with your Integrated Amplifier, please contact the appointed ROKSAN distributor for assistance.

Please observe correct mains polarity at all times.

The Kandy Power Amplifier mains fuse is located on the rear panel next to the IEC mains connector. This must
only be replaced by the fuse of the type and rating as described on the fuse rating label on the rear panel of the
unit.

This product requires connection to electrical earth (ground). The earth wire (in the UK this is colour coded
green/yellow) of the mains cable supplied with your Power Amplifier must be connected to a suitable grounding
point established for this purpose by your electricity supply company. If you are in any doubt, consult a qualified
electrician.

If the equipment is likely to be unused for some time, unplug it from the mains supply.

GENERAL CAUTIONS

FCC WARNING

This equipment may generate or use Radio Frequency energy. The user may lose the right to operate this
equipment if unauthorised modifications are made.

INTERFERENCE

Properly installed, this unit should not cause harmful interference to radio communications, There is, however, no
guarantee that such interference will not occur in a specific installation. If interference arises (which you can
determine by switching the unit off and on) you could try to remedy matters by the following:

• Re-orient or re-locate the receiving antenna

• Increase the distance between the Kandy Amplifier and receiver

• Connect the unit to a different mains circuit from that of the receiver

• Consult your ROKSAN appointed dealer or an experienced Radio/TV technician for help and advice

LOCATION

Your Kandy Power Amplifier should be located in a well ventilated area and kept away from sources of heat, dust
and humidity and from direct sunlight.
The Kandy Power Amplifier may be positioned either as a free standing unit or alongside another audio/video
product.
Never place the Power Amplifier on carpet or any surface likely to hinder normal ventilation.
Never allow liquids or other objects to fall into the unit.
This unit contains no user serviceable parts. Do Not remove any panels or attempt to service it yourself.
Unauthorised servicing will void the warranty.

Roksan Audio ltd Kandy Power Amplifier 2/3 Channel User Manual

CLASSIFICATION: General Use Version 1.0

All specifications are liable to change without notice. E&OE Page 3 of 10 ENGLISH