Roksan TMS-2 Owners manual
INNER PLATTER
1A SAW CUT FROM 6 ½ “ SOLID ALUMINUM ALLOY BAR
2A PRECISION MACHINED TO SHAPE (TUNED RESONANCE)
3B CUT FROM 16 SWG ALUMINUM ALLOY PLATE
4B PRECISION MACHINED TO SHAPE (TUNED RESONANCE)
5 PLATE PRESS FITTED ON CENTRE BOSS AND ITS
SURFACE AND EDGE PRECISION MACHINED FOR FINAL
SIZE AND ACCURACY
6 COMPLETE INNER PLATTER LINEARLY DAMPED FREE OF
ANY UNWANTED RESONANCE
OUTER PLATTER
1A SAW CUT FROM 12 “ SOLID ALUMINUM ALLOY BAR
2A PRECISION MACHINED TO SHAPE (TUNED RESONANCE)
3B SAW CUT FROM 12 “ SOLID ALUMINUM ALLOY TUBE
4B PRECISION MACHINED TO SHAPE (TUNED RESONANCE)
5 RIM HEATED TO EXPAND AND CENTRE PART FITTED
WHEN COOLED THE OUTER PLATTER PRECISION
MACHINED FOR FINAL SIZE AND ACCURACY
6 COMPLETE OUTER PLATTER LINEARLY DAMPED FREE
OF ANY UNWANTED RESONANC
E
PACKAGING
IMPORTANT: Your TMS2 reference record player main plinths are constructed from a specially
formulated material not unlike marble or stone and hence are extremely fragile. The packaging for your
TMS2 is carefully designed for safe transportation and all packaging material/parts used must be in good
condition and the unit must be repacked correctly to avoid shattering of the main plinths during
transportation. Please study the following section and keep all packaging material intact for safe future
transportation.
5 5
1
2
3
5
12
RECORD PLAYER Plinth Protection
Remove Refit
1, 2, 3 Narrow Plinth Packing Cards 1
4, 5 Wide Plinth Packing Cards 2nd 4
6, 7 Wide Plinth Packing Cards 3
8, 9, 10 Square Plinth Packing Rubber Sheet 4th 2
11, 12, 13 Rectangular Plinth Packing Rubber Sheet 5th 1
6
13
8
9
2
1
7
10
3
5 4
11
st
5
rd
3
th
th
rd
nd
st
A
1
B
2
C
3
Loading...