Rointe STN050SEM2, STN075SEM2, STN030SEM2, STN050SEB2, STN075SEB2 Installation And Operator's Manual
...
SYGMA
INSTRUCTIONS MANUAL
SYGMA DIGITAL
ELECTRIC TOWEL RAIL
MOUNTING, INSTALLATION,
STARTING AND OPERATION
EN
2
SYGMA
WELCOME
Dear Customer,
Thank you for choosing the SYGMA digital electric towel rail, with an
exclusive electronic temperature programmer and made with the
highest quality materials especially for you.
The SYGMA digital electric towel rail have exceeded the most
stringent quality controls in order to comply with the most rigorous
requirements for safety.
Before using the SYGMA digital electric towel rail, we recommend
that you read this instruction manual in order to ensure correct
operation.
IMPORTANT
THIS MANUAL SHOULD BE LEFT WITH THE PRODUCT AFTER
INSTALLATION
3
TABLE OF CONTENTS
1. DESCRIPTION OF THE SYGMA TOWEL RAIL .............................. 4
1.1. Front Panel Parts ................................................................. 4
1.2. Switching On & Off (stand-by) .............................................. 5
1.3. Setting the day and time ....................................................... 6
1.4. Locking the Control Panel .................................................... 7
1.5. Temperature Selection ......................................................... 7
1.6. Manual/Automatic Mode ...................................................... 7
1.7. Two-hour Boost Mode (2H) ................................................... 8
1.8. Open windows function ......................................................... 8
1.9. Screen brightness function .................................................. 9
2. PROGRAMMING THE SYGMA TOWEL RAIL .............................. 10
3. MOUNTING INSTRUCTIONS ..................................................... 12
4. CONNECTING INSTRUCTIONS ................................................. 13
4.1. SYGMA Towel Rail Technical Characteristics .................... 15
4.2. Specific Regulations for Bathrooms .................................. 17
5. MAINTENANCE & CLEANING ................................................... 17
5.1. Safety .................................................................................. 18
6. GUARANTEE .............................................................................. 18
ENGLISH
ATTENTION:
If you are the owner of a model bought in the UK or Éire, please refer
ONLY to its manual as the specifications of the towel rails are different.
4
SYGMA
TFT DISPLAY
CONTROL PANEL
1. DESCRIPTION OF THE SYGMA TOWEL RAIL
1.1. Front panel parts
5
1.1.1. TFT display symbols
SEGMENT INDICATION
1 PROGRAMMING
2 DAYS OF THE WEEK
3 TIME OF DAY
4 TEMPERATURE SELECTED
5 OPEN WINDOW FUNCTION
6 TOWEL RAIL HEATING
7 MANUAL / AUTOMATIC FUNCTION
8 COMFORT / ECO / ANTI-FROST MODE
9 LOCKING THE CONTROL PANEL
1.2. Switching On & Off (stand-by)
By pressing the key , we switch the towel rail on or off. The following
3
7
4
2
5
6
1
9
8
6
SYGMA
image will appear on the screen when switched on:
The screen will automatically go into sleep mode if no button is pushed
for 10 seconds. By pushing the button again the towel rail will go into
standby mode with the word “Standby” appearing followed by the
Rointe logo.
1.3. Setting the day and time
In order to adjust the time and day of the week, please follow the
steps below. First we choose the hour, then the minutes, then the
day of the week.
To enter the time and day adjust mode, press and hold the button
for 3 seconds.The hours will start flashing.
Select the hour using the and buttons to move the hour up or
down. Press once and the minutes will start to flash.
In the same way as with the hours, use and to increase or
decrease the minutes to select the correct time.
Once the minutes are correct press again so that the day flashes.
This represents Monday. With the button we can advance through
to day 2 (Tuesday), day 3 (Wednesday), etc. until we reach the required
day. Press again to confirm the day and to leave the time and date
adjust mode.
7
1.4. Locking the Control Panel
By pressing the keys and at the same time for 3 seconds, we
lock the control panel. The control panel symbol is activated and
the keys will not respond when pressed. If one key is pressed this
image will appear in the screen of the towel rail:
To unlock, press the and keys again, at the same time for 3
seconds.
1.5. Temperature Selection
By pressing or we change the temperature. When the room
temperature is lower than the set temperature, the electric towel rail
will begin to generate heat and the symbol will appear.
1.6. Manual / Automatic Mode
By pressing we change between the Manual and Automatic mode.
When the manual mode is selected, the symbol appears on the
display. When the automatic mode is selected, the symbol appears
on the display.
1.6.1. Manual Mode
This enables you to choose between the CONFORT, ECO and
ANTI-FROST modes of operation, changing the temperature as
indicated in Section 1.5.
ICON MODE TEMPERATURE RANGE
COMFORT 20ºC - 30ºC
ECO 15ºC - 19,5ºC
ANTI-FROST 8ºC
8
SYGMA
1.6.2. Automatic mode
This mode activates the programming set on the heated towel rail.
1.7. Two-hour Boost Mode (2H)
By pressing the key , the heated towel rail will work for two hours
at maximum power, regardless of any other mode. This mode takes
priority over any other.
When the heated towel rail is set on the two-hour mode, the screen
will show this image: for a few seconds.
Once the towel rail is set on the two-hour mode, and until the two
hours have finished or the key is pressed again, the display will
show this image:
1.8. “Open Window” function
This function is activated when the sensor detects a reduction of 4ºC
in respect of the set temperature during 30 minutes.
On activation, the following image will appear on the towel rail display
for 5 seconds:
When the “Open Window” function is activated, the following screen
Loading...