Rointe Basic Control User Manual
2
INSTRUCTION MANUAL
BASIC REMOTE CONTROL
Information, operation & installation
2
Contents
1. Introduction...............................................................2
2. Product information and operation.........................3
2.1. Control panel.....................................................3
2.2. Switching on and of f (stand-by)......................4
2.3. Select product to program..............................5
2.4. Adjust the Day/ Time.........................................5
2.5. Set the temperature..........................................5
2.6. Lock the keypad...............................................5
2.7. MANUAL/AUTOMATIC function......................6
2.7.1 MANUAL function...................................6
2.7.2 AUTOMATIC function.............................7
2.7.3 Pre-installed programmes.....................9
2.8. Send data........................................................10
3. Maintenance and cleaning.....................................10
3.1. Cleaning...........................................................10
3.2. Batteries..........................................................10
4. Guarantee................................................................11
5. Cer tificate of Guarantee.........................................15
1. Introduction
This product is manufactured with high quality com-
ponents and has passed the most demanding quality
controls to meet rigorous safety standards and effi-
ciency requirements. This product communicates via
infrared up to a distance of 3m.
IM P ORTANT - Please read this Instruction Manual
carefully to ensure correct operation. It is important
that this manual is left with the product after instal-
lation.
3
2. Product information and operation
2.1. Control panel
2.1.1. K eypad
NO. DESCRIPTION
0
TFT display
1
Send information button
Adjust day and time button
2
Decrease temperature button
3
MANUAL / AUTOMATIC function
4
Pre-installed programme 1 button
5
Pre-installed programme 2 button
6
Pre-installed programme 3 button
7
Pre-installed programme 4 button
8
On / Off button
Accept / Confirm button
9
Increase temperature button
4
2.1.2. TFT display panel
NO. DESCRIPTION
1
Programming
2
Days of the week
3
Time of day
4
Temperature selected
5
Control panel locked / unlocked
6
MANUAL / AUTOMATIC function indicator
7
COMFORT / ECO / ANTI-FROST mode indicator
2.2. Switching on and off (stand-by)
To switch the product ON, please press the
but-
ton once. After 5 seconds the temperature, time and
days of the week will be displayed.
To switch the product OFF, please press the
but-
ton once again. The product will go into stand-by
mode with the word ‘STAND-BY’ displayed.
If no mode is selected after 2 minutes, it will auto-
matically switch off. When the remote is switched off
the time and date will be stored, as well as the last
programme, provided the batteries are not removed.
5
2.3. Select product to program
After the remote has been switched on, the TFT
screen will display 2 options for you to choose
between: radiator, towel rail or water heater. Press
to select the radiator or towel rail to program.
Press to select the water heater to program.
2.4. Set the Day and Time
To set or adjust the day and time, please press and
hold the
button for 3 seconds. Use the and
buttons to set the hour, then press to
confirm. Then use the and buttons to set the
minutes and press to confirm. Finally, use the
and buttons to set the day (1 = Monday, 2 =
Tuesday etc.) and confirm by pressing the button.
Send the adjustment to the product by pressing the
button (see section 2.8.).
2.5. Set the temperature
To change the current temperature in the MANUAL
function, please press the
or the button. To
decrease the temperature press the button and
to increase the temperature press the button.
To change the temperature in the AUTOMATIC
function whilst editing a programme see the steps
above to increase or decrease temperature. Please
note that this will change the temperature for the
current mode (COMFORT or ECO) for all the hours
programmed in that mode.
2.6. Locking the keypad
To lock the keypad on your product using your remote
control, please hold and press the button AND
the button TOGETHER for 3 seconds. Then press
the button to send this instruction to your product
and the keypad lock will be activated. The symbol
6
will appear on the display panel of your product and
the keys will not respond.
To unlock the keypad on your product using your
remote control, please hold and press the
button
AND the button TOGETHER for 3 seconds. Then
press the button to send this instruction to your
radiator, towel rail or water heater. The keypad will
then be unlocked.
IM POR TA N T: In the event that your remote control
stops working, you can disable the keypad lock on
your product by pressing the button AND the
button TOGETHER for 3 seconds. The product
will reset but you will lose any programming.
2.7. MANUAL / AUTOMATIC functions
To change or choose the MANUAL or AUTOMATIC
function, press the
button on the keypad. You
can change from AUTOMATIC to MANUAL and vice
versa by pressing the button again. On the dis-
play panel, the symbol will appear for the AUTO-
MATIC function and the symbol for the MANUAL
function. The AUTOMATIC function activates the pro-
gramming you have already established in the prod-
uct.
MANUAL
This function allows you to change the
product between the COMFORT, ECO
and ANTI-FROST modes and to change
the temperature (see section 2.5.).
AU TO MATI C
This function will activate the
programming that has previously been
set in the product.
2.7.1. MANUAL function
The MANUAL function allows you to manually set the
temperature of your product. Press the button to
increase the temperature. Press the button to de-
Loading...