ROHS LED-PAR64-3W90BL-RGBW User Manual

USER MANUAL

High Power LED PAR, RGB 90 3W

LEDs Waterproof Black

（LED-PAR64-3W90BL-RGBW）

summarize ................................................................................................................. 1

safety instruction ........................................................................................................ 1

outside size picture ..................................................................................................... 2

light bady structure description .................................................................................. 3

main function .............................................................................................................. 3

DMX controller function ............................................................................................. 4

Display operation instruction ...................................................................................... 5

Manual instruction ...................................................................................................... 6

Operating control instruction ..................................................................................... 7

XRL connection instruction ......................................................................................... 9

Connection picture .................................................................................................... 10

Exploded Views ......................................................................................................... 12

illuminance list .......................................................................................................... 13

Problem analyse ........................................................................................................ 14

Technical specification…………………………………………………………………………………………15

Please read over this manual before operating the light

catalogue

1

1. Summarize

 Summarize

Thank you for purchasing our LED PAR lighting. Please read these instructions
carefully before begin and operate the fixtures according to these instructions to avoid any
possible damages and accidents causes by misusage.

 Products introduce

This led par color-changing projecting light is covered by high strength die-casting

aluminum which is able to endure high temperature, designed in a fashion of
hydrodynamic

form. It takes uses high power 3W,

R，G，B，W 4 kinds

LED,

the color

mixing effect is very good, high brightness. Each color can be independently dimmer, fading
changes and so on.

It uses power switch, performs low weight and consumption, stable
capability and long life. The built-in program includes dimmer, strobe, eotic, gradual change,
fading and so on. International standard DMX 512 signal is requested.

 Packing list

 LED-PAR64-3W90BL-RGBW light 1PC (waterproof power in/out extension

cable,waterproof DMX in/out extension cable)

 waterproof power in cable 1PC (with plugs)
 waterproof DMX in cable 1PC(connect to the controller)
 The use manual
 Warranty Card

2. Safety Information

 Safety Notes

! Enquire the skilled people before any repair;
! Always make sure disconnect from the power source before setting up, serving and moving;.
! Avoid direct eye exposure to the fixture when it is on;

2

 Safety instuction

● Make sure the power supply voltage are consistent with this lights，Ensure the use of
voltage is in the range of the request technical parameter.

●before the installation , please check the light’s fasteners and mechanical structure
have been received in good condition and appear no damage.

●This light is designed for indoor use, working temperature is lower than 40 degree.

●The fixtures maybe mounted in any position provided there is adequate room for

ventilation. Make sure there are no inflammable and explosive items(ornaments) in 0.5
meters away.

●Yellow / green cabling earthling safety; no flicker when the fixture is working on.

3. Outside Size Picture

3

4

4. Light body structure description

Order

number

Item

Quantity

Remarks

Order

number

Item

Quantity

Remarks

1

Front cover

1 11

Power main

board bracket

1

2

Glass

1 12

Main board

1

3

Glass waterproof

silicone

1 13

Display platen

1

4

Lens plate

1 14

display

1

5

Lamp panel

1 15

Silica gel
tabletting

1 6

bulb holder

1 16

waterproof

silicone

7

bracket

1 set

2PCS

17

Bottom base

1

8

Bottom case cover

1 18

wire clip

1

9

Bottom case

waterproof silicone

1 19

bumper

bracket

1

10

Power supply

1

5. Main Function

 Protection rating:IP65,in-door or out-door use
 unique cooling mode: natural convection

5

 DMX512 Controller，4 button set DMX ID address with led display
 master slave/interconnected multi-machine control
 lens degree: 15º、25º、45º optional
 using switching power supply to protect the LED to work well

 48*3W R,G,B,W LED
 Stobe、gradual change、jumping change

6. DMX Control Function

(3CH）

Channel

DMX Value

Control Function

Remark

1CH

0-255

RGB mixing

Hue

2CH

0-255

White diming0-100%

Color Saturation

3CH

0-255

General dimming 0-100%

brightness

Note: In this mode, the color represents visible light, such as red, green, yellow, blue and so
on. Color saturation refers to proportion of the main color ,100% saturation means it has
reached the solid.Value refers to the purity of the color brightness, 100% is the brightest.

（4CH）

Channel

DMX Value

Control Function

Remark

1CH

0-255

R 0-100%

2CH

0-255

G 0-100%

3CH

0-255

B 0-100%

4CH

0-255

W 0-100%

（5CH）

Channel

DMX Value

Control Function

Remark

1CH

0-255

General dimming

2CH

0-255

R 0-100%

3CH

0-255

G 0-100%

4CH

0-255

B 0-100%

5CH

0-255

W 0-100%

（8CH）

6

Channel

DMX Value

Control Function

Remark

1CH

0-255

General dimming

2CH

0-255

Red Dimming 0——100%

3CH

0-255

Green Diming0——100%

4CH

0-255

Blue Dimming 0——100%

5CH

0-255

White 0——100%

6CH

0-14

Dimming

When the 7CH above31，this

function is invalid

15-255

Strobe Speed

7CH

0-31

Invalid

32-63

From dark to bright

Must use CH1、2、3、4，5

otherwise no light，From the

8CH, start the speed

adjustment

64-95

From bright to dark

96-127

From dark—bright—dark

128-159

RGB Gradient

From the 8CH, start the

speed adjustment

160-191

dark-bright-dark Automatic

192-223

4 colors jumping change

224-255

Many color mixing jumping
change

8CH

0-255

Speed adjust（7CH）

7. Display Operation

DMX IN DMXOUT

MENU UP DOWN ENTER

SAFE EYE

POWER IN POWER OUT

7

Power-in cable power-out cable

DMX-in cable DMX-out cable

Safety eye

 MENU : access the menu or return to a previous menu option
 ENTER:select the current menu option
 UP:menu selection or parameter increments
 DOWN:menu selection or parameters decrease

8. Manual Instruction

Operating instruction:

1. MENU is used to access the menu or return to a previous menu option. It can not be

used to select and store the current menu option. Press UP / DOWN to choose a desired
menu item. Here are the operation details :

 ”addr”: DMX mode （A001-A512）
 “SLAV”:slave receive mode

 “CHNd”:DMX channel (3,4,5,8CH)
 ”SP”; built-in program speed change model (SP00-SP15, SP00 is the fastest)

 ”Pr”; Built-in program （Pr00-Pr15 16 program in all）

 ”ASC”; seven colors jumping（AS00-AS15 speed adjustable）

 ”FAdE”: gradual change model（FA00-FA15 speed adjustable）

 ”FLAS”: white color strobe（FL00-FL15 speed adjustable）

 ”rL”: red dimmer （r000-r255,, r255 is the brightest）

 ”gL”: green dimmer（g000- g255, g255 is the brightest）

 ”bL”: blue dimmer（b000- b255, b255 the brightest）

8

 ”UL”: white dimmer（U000- U255, U255 the brightest）

2. Press ENTER to access the further menu setting. This process can be saved

automatically; that means you will enter the process saved previously when you activate
the light next time. For example, if you want to choose DMX mode A001, operate as
follows:

 Press MENU, go back to the initial setting
 Press UP / DOWN until Addr
 Press ENTER to choose, the display will glinting at this moment
 Press UP / DOWN to change the address code to select A001


Press ENTER to select and store the current menu options. DMX mode will be

stored

automatically and the screen will stop glinting.

 DMX channel choosing Operation：CHNd mode
 Press Menu, go back to the initial setting
 Press UP/DOWN，until shows “CHNd”
 Press ENTER to access the menu items to select, the screen will now be glinting
 Press UP/DOWN to change the DMX Channel: 3CH、4CH, 5CH、8CH

At last, press ENTER to confirm, if

it delay for 3 seconds

, DMX channel choosing will

be saved, and go back to DMX receive mode(A001); If your press ENTER

for short

time or not press, delaying for

8

seconds

, the DMX channel will select to be saved

automatically, and then go back to DMX receive mode(A001)

3. Details of program built inside（Pr- -）

NOTE:Pr14--- Pr30 Can change the content Of SP，correct the speed of jumping change ,

SP00 is the fastest，SP15 is the slowest

 Pr00--- Pr13 :R,G,B,Wsigle or multi-colors mixing.
 Pr14--- Pr27: corespond to Pr00--- Pr13,add strob.

9

 Pr28:four colors jumping change.

9. Operating Control Instruction

 Master/Slave

Master：The master should always working as a master as long as it is not set in a DMX

mode whatever other modes it is. And it send out the signal so that the slave synchronous
with it. To avoid the host signal and DMX512 signals interfere with each other, should cut off
the DMX512 signals. The signal lines are longer than 60 meters(20 lamps) ,should increase
a signal amplifier.

Slave：he Slave must be set in DMX mode and the address code should be A001, to

assure receive the master’s signals correctly. Only one light can be set as a Master and
others are slaves.

Note: This product uses input and output power cord 2.5 m ㎡ copper core wire,

power line in series, when 220V AC should less than 10lights, and 110V AC less than 5
lights! ! !

10. XLR cable connecting

 XRL cable：

The stand connection way of the XRL is: one end connect to the male plug ,and the

other connect to the female.

10

Noted：In order to avoid failures and interference signal transmission，we connect a

resistance120Ω （ 1/4W ） at the end of the DMX connecting as below:

 The Conversion between 3pin and 5 pin XLR

If the output cable of DMX512 controller is the 5PIN, please use 1pc 5PIN to 3PIN
cable

11. Connecting picture

 Light connecting picture：

11

12

 Great waterproof PAR lamp wiring diagram

AC INPUT
L N E

ground

Dashboard PCB

Aluminum Light Panel：基灯板 LED PCB

DSLM-5408-2

控制主板 Control board PCB

V+ R G B W V+
GND
TXD
GND +24V SOUND
5V

MCU

IC

DSLM-5408-2A

K1 K2 K3 K4
DISPLAY

GND +24V

Power supply switch

AC220V/110V

V+
W R

B G
V+

13

12. Exploded views

14

13. illuminance list

15

14. Problem Analyse

Problem

Checking way

Can not turn on the

light

 Check the power source plug is in normal or not
 Check the switch of the lights is off or on
 Check the fuse if in normal

DMX can not control

it

 Check the DMX cable is connect to the lights or not
 Check the DMX512 controller work in normal or not
 Check the DMX cable is normal or not

 Check if the lights is in DMX mode（A001）

Display not bright

 When connect to the electricity，did the led flash one time? If so，

the power source is normal; If not，please check if the switch and
the transformer has power out

 Check if the power input of the IC board is normal
 Check if the cable connect to the display loose
 Change the main board to see if it is normal.
 Chang the display

LED not light

 When connect to the electricity，did the led flash one time? If so，

the power source is normal; If not，please check if the switch and
the transformer has power out

 Check if the power input of the IC board is normal
 Check if the cable connect to the display loose
 Change the main board to see if it is normal.
 Chang the display

 LED is connect by leds in series first, then connect parallel, so

please check if the leds is loose

16

Some of the LED not

light

 Use the multimeter to check if the led is bright or not, of not,

please change the led

 check whether current limiting resistor is normal or not
 Check constant current IC is normal or not (compared with the

normal IC)

Single color leds

always bright/not

bright

 Check the switch of this color is normal or not
 Change the IC control board

Noted：only professional persons can do as above！

15. Technical Specification

● Input voltage：AC 170V-264V/47-63HZ

● Output voltage：DC48V

● Consume：300W

● Lamp Type：High Power LED(3W)

● Lamp Spec：R（18PCS）, G（24PCS）, B（24PCS）, W（24PCS）,

● Control Signal：DMX512, master and slaver

● Control mode：stand alone/ DMX/ master and slaver

● Channel：3,4,5,8 CH

● Function Effect：dimmer, strobe, eotic, gradual change

● Beam Angle:45°

● Cooling mode: Natural Convection

● Protection rate:IP65

● Anti-electricity intension：1.5KV

● Insulation Resistance：＞２MΩ

● Size:：325*272*351mm

17

● Net Weight：13KG

6101 N 23rd Street, Suite K

McAllen, TX 78504 USA

e-mail: [e-mail]

Phone: [phone]

Fax: [phone]