RoHS LCD Digital Microscope User Manual

LCD Digital Microscope

User Manual

EN

inskam-306

Important Note

Thank you for purchasing a LCD Digital
Microscope. Please take a moment to read
through this manual. Its contents will help you
to get the best use of the smart microscope.

Before using the LCD Digital
Microscope, please ensure that you read and
understand the safety precautions described
below. Always ensure that the LCD Digital
Microscope is operated correctly.

1.

Keep LCD Digital Microscope away from
water and other liquids. Do not use LCD
Digital Microscope with wet hands. Never
use LCD Digital Microscope in the rain or
snow. Moisture creates the danger of fire
and electric shock.

If you notice smoke or a strange odor

2.

coming from LCD Digital Microscope, turn
the power off immediately.

3.

LCD Digital Microscope may become
slightly warm during use. This does not
indicate malfunction.

4.

If the exterior of LCD Digital Microscope
needs cleaning, wipe it with a soft, dry cloth.

Keep away
from liquids

Stay away

from the flame

EN-1

Please use dry

cloth for cleaning

Preparation

1

(1) Standard Accessories

1.

LCD Digital Microscope

USB cable

2.

Biological slice

3.

(2) Parts Names & Functions

1

3

OK

5

6

7

9

10

EN-2

Cleaning fabric

4.

Operation guide

5.

TF Card

8

11

DC 5V input

2

1

4.3 inch LCD display

2

4

MicroTF card slot

3

HDMI interface

4

LED brightness dimmer

5

Focusing wheel ( Wheel B )

6

Microscope tube

7

Wheel C

(3) Function Introduction

MicroTF card slot：Support MicroTF card

1.
(not equipped with this unit) up to 32GB，
Including FAT, FAT32 two file formats.

2.

Micro usb：DC 5V power supply and data
transmission.

HDMI high-definition interface：HDMI video

3.
transmission.

Reset hole

EN-3

charging indicator

8

Wheel A

9

Object stage

10

Capture button

11

Reset hole

12

DC 5V in

13

Charging indicator

Operation guide

Power on/off：Short press the power button

4.
to enter the file playback mode, long press
the switch machine.

Photograph：Short press to take a photo,

5.
long press the video, then press once to stop
recording.

Menu Setup：Short press to enter the menu

6.

1312

page，Here you can set the Language / LCD
Bright / Date and Time /Screen Saver /Power
frequency/ Format / Derault Setting / FW
Version.

7.

Zoom in/Right：Photo mode, short press to
zoom in, other modes, move up or left.

8.

Zoom out/Left：Photo mode, short press to
zoom out, other modes, move down or right.

Confirm：Short press to confirm, long press

9.
to rotate.

Power on/off

10.

LED brightness adjustment: Enhance light

Focusing wheel: Rotate this wheel to adjust to

11.
a clear image with two clear interfaces. The
best viewing distance is 0~1.57 inches.

Steps For Usage

2

(1) Standard Mode

Insert the MicroTF card (not equipped

1.

with this unit) into the MicroTF card slot;

MicroTF cards must be inserted to record
and store pictures and videos）.

2.

Long press on/off button，turn on the
device.

Put object to be observed onto the object

3.

stage, Rotate Wheel A to bring the object
near to the microscope tube.

4.

Rotate the wheel B left and right to obtain
fine focus.

5.

When a clear focus got, rotate Wheel C
clockwise to lock the object stage.

C

:etoN（ dekcol si drac eht litnu yltneg sserp

（2）U Disk Storage Mode

Connect the microscope to your computer via
a USB cable, turn on the device, select the

“mass storage” mode, and view the stored

photos and videos on your computer.

OK

B

A

1

TF Card

（3）PC Mode

Note: When using a computer

2

1. The device does not display images and the

Mac system ：

1.

In the "Applications" directory of the Finder window,
find an application called Photo Booth

device buttons cannot be used

2. The maximum resolution is 720P

3. The device display is in a black screen state,
which is a normal phenomenon

Windows system ：

A.

Download and install the pieces from the link
below:www.inskam.com/download/camera.zip

Turn on the device and connect the device

B.

and computer terminal through the data cable，
select PC Camera mode.

Open "Smart Camera", click on the device in

C.

the settings, as shown below.

Plug the USB cable into the computer's USB 2.0

2.

port, connect and turn on the device, and select PC
Camera mode on the interface.

3.

Click Photo Booth and select “USB 视频设备”,
ready to use

upwards, weaken light downwards.

（4）HDMI Mode

Please unplug the VGA cable of the computer
monitor before use and connect to the HDMI HD
cable (this unit is not equipped, please purchase
the mini HDMI HD cable)

Turn on the microscope and you can observe the
image you see in real time on the HD display.

HDMI

Charge Battery

3

1.

Please use the 5V 1A power adapter to charge

the device. When the battery is charging, the

charging indicator on the bottom of the device will

be red.

2.

After the battery is fully charged, the charging

indicator will go out and the power plug will be

unplugged. The entire charging process takes

about 4 hours.

3.

After fully charging, you can use the microscope

continuously for up to 4 hours.

When the battery is low, there will be a low battery

4.

indicator in the lower left corner of the panel (as

shown below), the LED will become weaker and

the image quality will deteriorate. Then, you must

Specifications

4

图像传感器 2 百万高品质图像传感器

Resolution 2.0 M

放大倍率 50x-500x

Magnifications 0-1000x

Display 4.3 inches TFT panel，16:9

Focusing range 0-40mm

Focus mode Manual

Resolution

Data Format JPG/AVI

Light source 8 LED lights (adjustable brightness)

Frame rate 30fps

Operating system Windows XP ,Vista,Win7/8/10, Mac 10.5 or above

Interface USB2.0

Lens structure 2G+IR

Aperture F4.5

Lens angle 16°

Language

Power supply

2400*1350，1920*1080，1280*720，640*480

English / German / French / Spanish / Italian /
Japanese / Simplified Chinese / Traditional Chinese /
Portuguese / Korean

Lithium ion 3.7V / 1500mAh battery
Working time: 4 hours; Charging time: 4 hours

Troubleshooting

5

Problems Solution

The unit does not turn on

Device crash

The screen is blank

There are smudges or
blemishes on the screen

The microscope is connected
to the HD display, but there is
no image on the screen

The microscope is connected to
the PC, and after downloading
and opening the software, there
is no image.

The microscope is connected to
the PC end and the TF card
cannot be read.

The battery indicator LED is not
in red, even though the power
adaptor is connected and
plugged into a wall socket -or­The battery is not charging

1. Does the battery have electricity?

2. Is the power supply connected?

1. Use a fine pin to insert the back reset hole，
restart the device.

1. Confirm that the item to be enlarged is correctly
positioned below the lens

2. Whether the focal length has been adjusted to
the optimal position

1. Clean the screen and lens carefully with soft
fabric

1. Make sure the HD screen is turned on

2. Whether to successfully switch to the
corresponding video input channel on the HD screen

3. Make sure the video cable is securely connected
to the microscope video output port

1. Reconnect the microscope to the PC

2. Confirm whether to enter PC camera mode

1. Reconnect the microscope and PC

2. Confirm whether to enter the Mass Storage mode

1. Plugged into the Microscope’s DC-in port

2. Ensure that the outlet has power and is not

malfunctioning. If the outlet is connected to a wall

switch, make sure that the switch is on

connect the power adapter and plug it into the

battery to charge (Note: The charging time must

be at least 1 hour or more for normal use).

(Specific parameter settings can refer to the picture content)

EN-4 EN-5 EN-6

EN-9EN-8EN-7

EN-10 EN-11 EN-12

Steps for us age

1

TF Card

Insert the MicroTF car d (not equipp ed with this

1.

unit) into the MicroTF card slot; press gently

must be inserted to record and stor e picture s
and videos ）.

3

Object stage

Put object to be observed onto the object

3.

stage, Rotate Wheel A to bring the obje ct
near to the microscope t ube.

d
ar
G
TF

d
r
a

TF G

A

5

Turn the wheel

clockwise C

When a clear focus go t, rot ate Whee l C

5.

clockwise to lock the ob ject stage.

2

OK

Long pres s on/off button，

2.

turn on the devi ce.

sdrac FTorciM :etoN（ dekcol si drac eht litnu

4

OK

Swipe left and r ight

Rotate the wh eel B left and

4.

right to obtain f ine focus.

6

Connect the mi croscope to your computer

6.

via a USB cable, turn on the device, s elect

store d pho tos and videos on your compute r.

eht weiv dna ,edom ”egarots ssam“ eht