ROHS AVGA Technical data

Type AVGA –40 °C to +105 °C

High Capacitance SMT Aluminum Electrolytic Capacitors

For Filtering, Bypassing and Power Supply Decoupling with High Capacitance Requirements

Type AVGA Capacitors are rated for 2000 hours at 105 ºC and up to
63 Vdc. They are ideal for high density PC board packaging. The
Type AVGA offers a low in-place-cost for a high quality performer.

The vertical cylindrical cases facilitate automatic mounting and reflow
soldering into the same footprint of like-rated tantalum capacitors
except without the need for voltage derating. Type AVGA is RoHS
compliant.

Highlights

• +105 °C, Up to 2000 Hours Load Life

• Capacitance Range: 0.1 µF to 4700 µF

• Voltage Range: 6.3 Vdc to 63 Vdc

Specifications

Operating Temperature:

Rated Voltage:

Capacitance:

Capacitance Tolerance:

–40 °C to +105 °C

6.3, 10, 16, 25, 35, 50, 63 Vdc

0.1µF to 4700 µF
±20% @ 120 Hz and +20 °C

Leakage Current (at 20 ºC):

Dissipation Factor:

(Tan δ at 120 Hz, 20 ºC

Low Temperature

Characteristic (at 120 Hz):

Load Life Test:

6.3 – 63 V

I = leakage current C = rated capacitance in µF V = rated DC Working voltage in V

Rated Voltage 6.3 10 16 25 35 50 63

)

4 ~ 10 Ø 0.45 0.35 0.28 0.18 0.16 0.14 0.12

12.5 ~ 16 Ø 0.4 0.38 0.34 0.26 0.22 0.18 0.14

When the capacitance exceeds 1000 µF, .02 shall be added for every 1000 µF increase

Impedance

Ratio

Impedance ratio shall not exceed the values given in the table above.

Capacitance Change

Dissipation Factor < 200% of specified value

Leakage Current Within specified value

* The above specifications shall be satisfied when the capacitors are
restored to 20 ºC after the rated voltage is applied for 2,000 hrs at 105 ºC

4 – 10 Ø I = 0.01 CV or 3 µA, whichever is greater, after 2 minutes at +20 ºC

12.5 ~ 16 Ø I = 0.03 CV or 4 µA, whichever is greater, after 2 minutes at +20 ºC

Rated Voltage 6.3 10 16 25 35 50 63

Z(–25 ºC) 4 ~ 10 Ø 4 3 2 2 2 2 2

/Z(+20 ºC) 12.5 ~ 16 Ø 5 4 3 2 2 2 2

Z(–40 ºC) 4 ~ 10 Ø 12 8 6 4 3 3 3

/Z(+20 ºC) 12.5 ~ 16 Ø 10 8 6 4 3 3 3

Test Time 2,000 Hours

4 ~ 6.3 Ø : Within ±25 % of initial value

8 ~ 16 Ø : Within ±20 % of initial value

Shelf LifeTest:

Complies with the EU Directive 2002/95/EC requirement
restricting the use of Lead (Pb), Mercury (Hg), Cadmium
(Cd), Hexavalent chromium (Cr(VI)), PolyBrominated
Biphenyls (PBB) and PolyBrominated Diphenyl Ethers
(PBDE).

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: [phone] • Fax: [phone] • www.cde.com

Test time: 1000 hours; other items are the same as those for life test.

Type AVGA –40 °C to +105 °C

ØD ± 0.5

0.

3 Max

B ± 0.2

0.4 ±0.2

C ±0.2

W

P

A ± 0.2

L

C ±0.2

ØD ± 0.5

B ± 0.2

C ±0.2

W

P

A ± 0.2

L

C ±0.2

0

.4 Max.

1.0 Max.

Fig. 1

Fig. 2

High Capacitance SMT Aluminum Electrolytic Capacitors

Outline Drawings, Case Code & Dimensions Table

Case Ø D L A B C W P ±0.2 Fig.

Code (mm) (mm) (mm) (mm) (mm) (mm) (mm) No.

B 4.0 5.7 ±0.3 4.3 4.3 2.0 0.5 to 0.8 1.0 1

C 5.0 5.7 ±0.3 5.3 5.3 2.3 0.5 to 0.8 1.5 1

D 6.3 5.7 ±0.3 6.6 6.6 2.7 0.5 to 0.8 2.0 1

X 6.3 7.7 ±0.3 6.6 6.6 2.7 0.5 to 0.8 2.0 1

F 8.0 10 ±0.5 8.4 8.4 3.0 0.7 to 1.1 3.1 1

G 10.0 10 ±0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 1

Q 10.0 10.3 ±0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 1

H 12.5 13.5 ±0.5 12.8 12.8 4.9 1.1 to 1.4 4.2 2

L 12.5 16 ±0.5 12.8 12.8 4.9 1.1 to 1.4 4.2 2

P 16.0 16.5 ±0.5 16.3 16.3 5.8 1.1 to 1.4 6.0 2

Part Numbering System

AVGA 227 M 25 F 24T –F

Type

AVGA 104 = .1 µF M = ±20% 06 = 6.3 Vdc See 24 = Carrier tap

Capacitance Capacitance Voltage Code Case Packaging Code RoHs

475 = 4.7 µF 10 = 10 Vdc Table Width (mm)

106 = 10.0 µF 16 = 16 Vdc T = Tape & Reel

227 = 220 µF 25 = 25 Vdc Y = Tray Pack

478 = 4700 µF 35 = 35 Vdc

Tolerance

50 = 50 Vdc

63 = 63 Vdc

Code Compliant

(available for H,L,
& P case codes)

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: [phone] • Fax: [phone] • www.cde.com