r
.
High power Chip IR LED, side view type
SIM-012SB
The SIM-012SB is ultra small size and high power ohip sensor. Original technology, original structure and original
Optical design enable to use Automatic moantinig machine, Reflow, ultra smallsize, High power.
Applications Dimensions (Unit : mm)
Optical control equipment
Light source for remote control devices
Features
1) High power by 2 lenze.
2) Emitting pore can have 7time high power then
substruk type with parabola structure.
3) Ultra -compact surface mount package.
(3mmx3mmx2mm)
4) It is possible to do Reflow.
Absolute maximum ratings (Ta=25C)
Parameter Symbol
Forward current
Reverse voltage
Power dissipation
Pulse forward current
Operating temperature
Storage temperature
∗ Pulse width=0.1msec, duty ratio 1%
I
F
V
P
I
FP
Topr
Tstg
R
D
∗
Electrical and optical characteristics (Ta=25C)
P
V
λ
Δλ
I
I
1 / 2
f
Min.
O
−
E
0.9
F
R
−
−
−
P
−
−
−
C
−
Parameter
Optical output
Emitting strength
Forward voltage
Reverse current
Peak light emitting wavelength
Spectral line half width
Half-viewing angle
Pesponse time
Cut-off frequency
Symbol
θ
tr·tf
Limits
40
5
60
0.5
−30~+85
−40~+100
Typ.
3.5
−
1.2
−
950
40
±12
1.0
1.0
Max.
−
7.1
1.5
10
−
−
−
−
−
Unit
mA
V
mW
A
°C
°C
Unit
mW
mW/sr
V
μA
nm
nm
deg
μs
MHz
I
F
=20mA
F
=20mA
I
F
=20mA
I
V
R
=3V
F
=20mA
I
I
F
=20mA
F
=20mA
I
I
F
=20mA
F
=20mA
I
2-0.4
12
R1
Note)
0.25
3
0.8
(1.15)
Conditions
1.Unspecified tolerance shall be
2.Dimension in parenthesis are show fo
2
3
2
Internal connection diagram
2
1
+
0.2.
−
reference
www.rohm.com
1/2
c
○
2010 ROHM Co., Ltd. All rights reserved.
2010.12 - Rev.B
0
FORWARD CURRENT : I
(mA)
2
0
0
1000
RELATIVE OPTICAL OUTPUT : P
(%)
0
100
0
100
0
100
Data Sheet SIM-012SB
Electrical and optical characteristic curves
50
(mA)
F
40
30
20
10
FORWARD CURRENT : I
0
−20 0 40608020
AMBIENT TEMPERATURE : Ta (°C)
10
Fig.1 Forward current faloff
(%)
E
100
50
F
40
30
20
10
0
0
FORWARD VOLTAGE : V
Fig.2 Forward current vs.
forward voltage
O
80
60
40
20
8
−25
°C
0
°C
25
°C
50
°C
75
°C
1
F (V)
6
(mW/sr)
E
4
2
EMITTING STRENGTH : I
0
10020304
FORWARD CURRENT : I
F
(mA)
Fig.3 Emitting strength vs.
forward current
RELATIVE EMITTING STRENGTH : I
10
−25−50
AMBIENT TEMPERATURE : Ta (°C)
25 10
0
50 75
Fig.4 Relative emitting strength
vs.ambient temperature
90
(%)
80
70
60
50
40
30
20
10
RELATIVE EMITTING STRENGTH
0
−90 0 9
−60 −30 30 60
ANGULAR DISPLACEMENT : θ
Fig.6 Directional pattern(1)
0
−+
(deg)
0
900 920 940 960 980 100
OPTICAL WAVELENGTH : λ (nm)
Fig.5 Wavelength
90
(%)
80
70
60
50
40
30
20
10
RELATIVE EMITTING STRENGTH
0
−90 0 9
−60 −30 30 60
ANGULAR DISPLACEMENT : θ
−+
0
(deg)
Fig.7 Directional pattern(2)
www.rohm.com
2/2
c
○
2010 ROHM Co., Ltd. All rights reserved.
2010.12 - Rev.B
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specied herein is subject to change for improvement without notice.
The content specied herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specied in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specied herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
Notice
The Products specied in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, of ce-automation equipment, communication devices, electronic appliances and amusement devices).
The Products specied in this document are not designed to be radiation tolerant.
While ROHM always makes effor ts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injur y, re or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, re control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specied herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
http://www.rohm.com/contact/
R1010
A
Loading...