A
Thick film thermal printhead
KD3006-DC92A
KD3006-DC92A is developing type of GL40 se ries which are de veloped mainly of label printers.
We have adopted low coefficient of abrasio n and c ond uctive pr otect ion co at to GL40 seri es which are possib le for h igh sp eed and
good printing quality.
That is KD3006-DC92A which is 24V standard thick film therm al print head with high spee d, high qu ality of p rinting, h igh dura bility ,
long life, and strong resistance to abration.
zApplications
High speed label printer
High speed bar code printer
High speed ticket printer
Various high speed terminal printers
zFeatures
1) Newly developed thick-film fast response thermal element is employed for this series and 4 inches/s or 100 mm/s is possible
without thermal history control. It is possible to print 10 inches/s or 250 mm/s if external thermal history control is used.
2) 150km life realized by attributing durable new protection film.
3) New partial glaze construction makes it compatibl e with the th ermal transfer application .
zDimensions (Unit : mm)
(3.5)
Max.40
Max.48
φ3H10 (Effective Depth 3)
7.3±0.3
13.3±0.3
17.8±0.2
#1
Dot #1920
CONNECTOR A
182
162.624 (Effective Print Width)(9.688)
#34#2
#33
φ3H10 Length 4(Effective Depth 3)
#10
CONNECTOR B
Dot #1
LABEL
10.1±0.4
(9)
Max.φ20
Max.5
#1
Max.14.0
40±0.3
41.312±0.2
44±0.3
80±0.3
124±0.3
3-M3(Effective Depth 3)
www.rohm.com
c
○
2009 ROHM Co., Ltd. All rights reserved.
1/3
2009.01 - Rev.
A
DOT #1920 DOT #1
S
S
S
S
S
S
CONNECTOR BCONNECTOR A
KD3006-DC92A Data Sheet
zEquivalent circuit
V
GND
N.C.
LAT
TB6
TB5
TB4
TB3
TB2
TB1
H
DD
V
1
00µF
x2
35V
#1920 #1601 #1600 #1281 #1280 #961 #960 #641 #640 #321 #320 #1
LATCH REGISTER
CLK
DI6
DO6
DI5
DO5
DI4
DO4
DI3
DO3
DI2
DO2
DI1
DO1
TM
TM
CONNECTOR
DI No.
DI1
DI2
DI3
DI4
DI5
DI6
zPin assignments
CircuitNo.
1 GND
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
DD
V
GND
DD
V
NC
NC
NC
NC
NC
NC
DI6
DO6
DI5
DO5
NC
NC
STB5
SHIFT
REGISTER
DOT No.
1 to 320
321 to 640
641 to 960
961 to 1280
1281 to 1600
1601 to 1920
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
REGISTER
STB6
CLK
/ LAT
TM
TM
STB3
STB4
STB1
STB2
DI4
DO4
DI3
DO3
DI2
DO2
DI1
DO1
SHIFT
Fig.1
SHIFT
REGISTER
REGISTER
THERMISTOR
30k
Ω
STB No.
STB1
STB2
STB3
STB4
STB5
STB6
1V
2
3
4
5
6
7
8
9
10
SHIFT
SHIFT
REGISTER
B : 3950K
DOT No.
1 to 320
321 to 640
641 to 960
961 to 1280
1281 to 1600
1601 to 1920
CircuitNo.No. Circuit
V
V
V
V
GND
GND
GND
GND
GND
SHIFT
REGISTER
H
H
H
H
H
www.rohm.com
c
○
2009 ROHM Co., Ltd. All rights reserved.
2/3
2009.01 - Rev.
A
8
4
KD3006-DC92A Data Sheet
zCharacteristics
Parameter
Effective printing width
Dot pitch
Total dot number
Average resistance value
Applied voltage
Applied power
Print cycle
Maximum number of dots energized simultaneously
Maximum clock frequency
Maximum roller diameter
Running life / pulse life
Operating temperature
zDat a sheet s
1.6
SLT : 0.82ms/line
1.4
1.2
1.0
0.8
0.6
OPTICAL DENSITY
0.4
0.2
0.0
0.00 0.02
0.12 0.14 0.160.08 0.100.04 0.06
ENERGY (mJ/dot)
0.1
0.6
0.5
0.4
0.3
0.2
ENERGY (mJ/dot)
0.1
0.0
0123
Symbol Typical Unit
−
−
−
Rave
V
H
PO
SLT
−
−
−
−
−
SCANNING LINE TIME (ns/line)
162.624
0.0847
1920
1000
24
0.50
0.83
960
12
φ20.0
150/(1×10
5 to 45
8
)
mm
mm
dots
Ω
V
W/dot
ms
dots
MHz
mm
km/pulses
°C
Fig.2 Representative density curve
Fig.3 Maximum energy curve
www.rohm.com
c
○
2009 ROHM Co., Ltd. All rights reserved.
3/3
2009.01 - Rev.
Appendix
No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM
CO.,LTD.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you
wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM
upon request.
Examples of application circuits, circuit constants and any other information contained herein illustrate the
standard usage and operations of the Products. The peripheral conditions must be taken into account
when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document. However, should
you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no re-
sponsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and examples
of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to
use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no re-
sponsibility whatsoever for any dispute arising from the use of such technical information.
The Products specified in this document are intended to be used with general-use electronic equipment
or devices (such as audio visual equipment, office-automation equipment, communication devices, elec-
tronic appliances and amusement devices).
The Products are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or
malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard against the
possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as
derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your
use of any Product outside of the prescribed scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or system
which requires an extremely high level of reliability the failure or malfunction of which may result in a direct
threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment,
aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear
no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intend-
ed to be used for any such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may be controlled under
the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law.
Notes
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact your nearest sales office.
ROHM Customer Support System
www.rohm.com
Copyright © 2009 ROHM Co.,Ltd.
21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
THE AMERICAS / EUROPE / ASIA / JAPAN
Contact us : webmaster@ rohm.co. jp
TEL : +81-75-311-2121
FAX : +81-75-315-0172
Appendix-Rev4.0
Loading...