KD2006-DC10A
Printhead
Thick film thermal printhead
KD2006-DC10A
The KD2006-DC10A is a 24V standard thick film thermal printhead with a printing speed up to 6 inches / s that has been
developed mainly for label printer use .
zApplications
High speed label printer
High speed bar code printer
High speed ticket printer
Various high speed terminal printers
zFeatures
1) Newly developed thick-film fast respons e thermal elem ent is employed f or this serie s and 6 inches/s or 150 mm/s is
possible without thermal history control. It is possible to print 10 inches/s or 250 mm/s if external thermal history control
is used.
2) 150km life realized by attributing durable new protection film.
3) New partial glaze construction makes it compatibl e with the th ermal transfer application .
1/5
KD2006-DC10A
Printhead
zExternal dimensions (Unit : mm)
LABEL
Max.40
Max.48
17.8±0.2
13.3±0.3
Dot #1344
(3.5)
#1
φ3H10 (Effective Depth 3)
7.3±0.3
44±0.2 (Heat Element)
44±0.3
CONNECTOR A
40±0.3
182
168 (Effective Print Width)(7)
#34#2
#33
φ3H10 Length 4(Effective Depth 3)
80±0.3
#10
CONNECTOR B
124±0.3
3-M3(Effective Depth 3)
Dot #1
#1
10.1±0.4
(9)
Max.φ20
Max.5
Max.14.0
2/5
KD2006-DC10A
Printhead
zEquivalent circuit
DOT #1344 DOT #1
100µF×2
35V
#1344 #1088 #833 #832 #641 #640 #449 #448 #257 #256
#1089
#1
GND
VSF
N.C.
STB6
STB5
STB4
STB3
STB2
STB1
V
H
V
DD
L/S
/ LAT
CLK
DO6
DO5
DO4
DO3
DO2
DO1
DI6
DI5
DI4
DI3
DI2
DI1
TM
TM
CONNECTOR
SHIFT
REGISTER
VSF : Usually VSF and VH are connected.
When measuring R value of Heatelement , VSF and VH should be
separated.
SHIFT
REGISTER
THERMISTOR
30kΩ B : 3950K
DI No.
DI1
DI2
DI3
DI4
DI5
DI6
LATCH REGISTER
SHIFT
REGISTER
DOT No.
1 to 256
257 to 448
449 to 640
641 to 832
833 to 1088
1089 to 1344
SHIFT
REGISTER
SHIFT
REGISTER
STB No.
STB1
STB2
STB3
STB4
STB5
STB6
SHIFT
REGISTER
DOT No.
1 to 256
257 to 448
449 to 640
641 to 832
833 to 1088
1089 to 1344
Fig.1
3/5
KD2006-DC10A
Printhead
zPin assignments
CONNECTOR BCONNECTOR A
CircuitNo.
1 GND
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
VSF
GND
V
DD
NC
NC
NC
NC
NC
NC
DI6
DO6
DI5
DO5
NC
NC
STB5
zCharacteristics
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
STB6
CLK
/ LAT
TM
TM
STB3
STB4
STB1
STB2
DI4
DO4
DI3
DO3
DI2
DO2
DI1
DO1
10
CircuitNo.No. Circuit
V
V
V
V
GND
GND
GND
GND
GND
H
H
H
H
H
1V
2
3
4
5
6
7
8
9
Parameter
Effective printing width
Dot pitch
Total dot number
Average resistance value
Applied voltage
Applied power
Print cycle
Maximum number of dots energized simultaneously
Maximum clock frequency
Maximum roller diameter
Running life / pulse life
Operating temperature
Symbol Typical Unit
−
−
−
Rave
V
H
P
O
SLT
−
−
−
−
−
168
0.125
1344
650
24
0.75
0.82
704
8
φ20.0
150/(1×10
5 to 45
8
)
mm
mm
dots
Ω
V
W/dot
ms
dots
MHz
mm
km/pulses
°C
4/5
KD2006-DC10A
Printhead
zDat a sheet s
1.6
SLT : 0.82ms/line
1.4
1.2
1
0.8
0.6
OPTICAL DENSITY
0.4
0.2
0
0.00 0.05
ENERGY (mJ/dot)
Fig.2 Representative density curve
0.400.30 0.350.20 0.250.10 0.15
1.0
0.9
0.8
0.7
0.6
0.5
0.4
ENERGY (mJ/dot)
0.3
0.2
0.1
0.0
01234
SCANNING LINE TIME (ns/line)
Fig.3 Maximum energy curve
5/5
Appendix
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
Notes
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1
Loading...