ROHM DTD723YE, DTD723YM Schematic [ru]

DTD723YE / DTD723YM

Transistors

200mA / 30V Low V

CE

(sat) Digital transistors

(with built-in resistors)

DTD723YE / DTD723YM

zApplica tions

Inverter, Interface, Driver

zFeature

CE (sat) is lower than conventional products.

1) V

2) Built-in bias resistors enable the co nfiguration of an
inverter circuit without connecting external input
resistors (see equivalent circuit).

3) The bias resistors consist of t hin-film resistors with
complete isolation to allow negative biasing of the
input. They also have the advantage of almost
completely eliminating parasitic effects.

4) Only the on / off conditions need to be set for

operation, making the device design easy .

zStructure

NPN epitaxial plannar silicon transistor
(Resistor built-in type)

zAbsolute maximum ratings (Ta=25°C) zPackaging specifications

Parameter

Supply voltage
Input voltage
Collector current
Power dissipation
Junction temperature
Storage temperature

∗1 Characteristics of built-in transistor.
∗2 Each terminal mounted on a recommended land.

Symbol

V

CC

IN

V

∗1

C (max)

I

∗2

P

D

Tj

Tstg

Limits

DTD723YE DTD723YM

30

−5 to +15
200
150
150

−55 to +150

zElectrical characteristics (Ta=25°C) zEquivalent circuit

Parameter Symbol

Input voltage

Output voltage
Input current
Output current
DC current gain
Transition frequency
Input resistance
Resistance ratio

∗ Characteristics of built-in transistor.

∗

V
V

V

O(on)

I

O(off)

G

R

R2/R

I(off)

I(on)

I

f

I

I

T

1

1

Typ. Max. Unit Conditions

Min.

−

70

260

2.2

4.5

0.3

−

−

−

−

V

−

mV

300

mA

3.0
nA

500

−

−

MHz

−

2.86

kΩ

5.5

−−

−

2.5

−

−

−

140

−

1.54

3.6

zExternal dimensions (Unit : mm)

DTD723YE

EMT3
JEITA No. (SC-75A)
JEDEC No. <SOT-416>

DTD723YM

VMT3

Unit

V
V

mA

mW

C

C

Part No.
DTD723YE
DTD723YM

1.6

(3)

(2)

0.2

0.5

1.0

Abbreviated symbol : M62

0.22

Abbreviated symbol : M62

V

CC

= 5V, IO= 100µA

O

= 0.3V, IO= 20mA

V
I

O/II

= 50mA / 2.5mA

I

= 5V

V
V

CC

= 30V, VI=0V

O

= 2V, IO= 100mA

V
V

CE

= 10V, IE= −5mA, f=100MHz

−

0.7

0.3

0.5

1.2

0.32

(3)

(1)

0.40.4

0.8

Package

0.55

1.6

0.8

(1)

0.2

0.15

Each lead has same dimensions

0.2

1.2

0.8

(2)

0.13

0.2

0.5

Each lead has same dimensions

(1) GND

0.1Min.

(2) IN
(3) OUT

(1) IN
(2) GND
(3) OUT

EMT3 VMT3

Packaging type Taping Taping

Code

Basic ordering
unit (pieces)

TL

3000

−

R

1

IN

R

2

IN

GND

R1=2.2kΩ / R2=10kΩ

T2L

8000

−

OUT

GND

OUT

1/1

Appendix

No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.

Notes

The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.

About Export Control Order in Japan

Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.

Appendix1-Rev1.1