-500mA / -50V Digital transistors
(with built-in resistors)
DTB143EK
Applications Dimensions (Unit : mm)
Inverter, Interface, Driver
Features
1) Built-in bias resistors enable the configuration of an inverter
circuit without connecting external input resistors (see
equivalent circuit).
2) The bias resistors consist of thin-film resistors with complete
isolation to allow positive biasing of the input. They also have
the advantage of almost completely eliminating parasitic
effects.
3) Only the on / off conditions need to be set for operation,
making the device design easy.
Structure
PNP epitaxial planar silicon transistor
(Resistor built-in type)
Packaging specifications Inner circuit
SMT3
Taping
T146
3000
Part No.
DTB143EK
Package
Package type
Code
Basic ordering
unit (pieces)
Absolute maximum ratings (Ta=25C)
Parameter Symbol
Supply voltage
Input voltage
Output current
Power dissipation
Junction temperature
Storage temperature
V
V
I
Pd
Tj
Tstg
CC
IN
C
Limits
DTB143EK
−50
−30 to +10
−500
200
150
−55 to +150
Unit
V
V
mA
mW
C
C
DTB143EK
ROHM : SMT3
EIAJ : SC-59
R
1
IN
R
2
IN
R1=R2=4.7kΩ
2.9
0.4
(3)
(2)
0.95 0.95
1.9
Abbreviated symbol : F13
OUT
GND(+)
OUT
GND(+)
1.1
0.8
1.6
2.8
(1)
0.15
Each lead has same dimension
0.3Min.
(1) GND
(2) IN
(3) OUT
www.rohm.com
1/2
c
○
2009 ROHM Co., Ltd. All rights reserved.
2009.06 - Rev.C
Electrical characteristics (Ta=25C)
Parameter Symbol
Input voltage
Output voltage
Input current
Output current
DC current gain
Input resistance
Resistance ratio
Transition frequency
Characteristics of built-in tranasistor
∗
Electrical characteristic curves
-100
-50
-20
(V)
I (on)
-10
-5
-2
-1
-500m
INPUT VOLTAGE : V
-200m
-100m
Ta= −40 C
25 C
100 C
-1m-0.5m -2m -5m -10m -20m -50m -100m -200m -500m
OUTPUT CURRENT : I
O
Fig.1 Input voltage vs. output current
(ON characteristics)
-1
-500m
(V)
-200m
O (on)
-100m
-50m
-20m
-10m
-5m
OUTPUT VOLTAGE : V
-2m
-1m
-1m-0.5m -2m -5m -10m -20m -50m -100m -200m -500m
Ta=100 C
25 C
−40 C
OUTPUT CURRENT : I
O
Fig.4 Output voltage vs. output
current
V
I(off)
V
I(on)
V
O(on)
I
O(off)
G
R
R2/R
f
VO= −
(A)
lO/lI=20
(A)
Min.
−
−3
−
−
I
I
−
47
I
3.29
1
0.8
1
−
T
∗
0.3V
Typ. Max. Unit Conditions
−
−
−0.1
−
−
−
4.7
1
200
−0.5
−
−0.3
−1.8
−0.5
−
6.11
1.2
−
-10m
-5m
-2m
(A)
-1m
-500μ
-200μ
-100μ
-50μ
-20μ
-10μ
OUTPUT CURRENT : Io
-5μ
-2μ
-1μ
V
CC
V
V
mA
μA
−
kΩ
= −5V, IO= −100μA
O
= −0.3V, IO= −20mA
V
I
O/II
= −50mA/−2.5mA
V
I
= −5V
V
CC
= −50V, VI=0V
V
O
= −5V, IO= −50mA
−
−−
MHz
VCE= −
10V, IE=
50mA, f=100MHz
Ta=100 C
25 C
−40 C
0 -3.0-0.5 -1.0 -1.5 -2.0 -2.5
INPUT VOLTAGE : V
I (off)
Fig.2 Output current vs. input voltage
(OFF characteristics)
VCC= −
(V)
Data Sheet DTB143EK
5V
1k
500
I
200
100
50
20
10
DC CURRENT GAIN : G
Ta=100 C
25 C
−40 C
5
2
1
-1m-0.5m -2m -5m -10m -20m -50m -100m -200m -500m
OUTPUT CURRENT : I
Fig.3 DC current gain vs. output
current
VO= −
5V
O
(A)
www.rohm.com
2/2
c
○
2009 ROHM Co., Ltd. All rights reserved.
2009.06 - Rev.C
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specied herein is subject to change for improvement without notice.
The content specied herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specied in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specied herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other par ties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
Notice
The Products specied in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, ofce-automation equipment, communication devices, electronic appliances and amusement devices).
The Products specied in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, re or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, re control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller,
fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of
any of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specied herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
R0039
A
Loading...