Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
1
C7232/2
A1470 Spare Parts
C7075-2
counterclockwise
_SPOUT RING SET
_
C7593SET
www.rohlhome.com
A5556CR
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
A5556CR
2
Installation Instructions
ww.rohlhome.com
w
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
3
Installation Instructions
INSTALLATION FOR SINGLE HOLE/TWO LEVER FAUCETS
with two lever or cross handle design
(MODELS INCLUDE: A1467, A1466, A1470, A1469
or A1680,A1679, A1667, A1676)
Model A1676 shown
1. Install the supply hoses into the body.
° Note: hand tighten only, do not over tighten.
ww.rohlhome.com
w
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
4
Installation Instructions
INSTALLATION
2. Install mounting stud securely or verify it is installed
ww.rohlhome.com
w
3. Insert faucet into mounting hole
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
5
Installation Instructions
INSTALLATION
4. Under the sink, stack the half ring
rubber gasket - 6, the half ring mounting
plate - 7, then the mounting nut - 8 onto
the stud.
ww.rohlhome.com
w
8
5. Check the position on the sink of the faucet,
then tighten the nut with a 13mm wrench.
° Note: the under deck mounting
surface must be flat. If irregular, the
nut may not be secured, and the
faucet will be loose on the sink.
6. Connect the supply lines to the hot and cold
supplies.
7. Turn on the water for the hot and cold.
Check for leaks.
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
6
Installation Instructions
MAINTENANCE FOR SINGLE HOLE/TWO LEVER FAUCETS
with two lever or cross handle design
HOW TO CHANGE THE HOT OR COLD CARTRIDGE
(MODELS INCLUDE: A1467, A1466, A1470, A1469
or A1680,A1679, A1667, A1676)
(model A1469 and A1676 shown)
1.Turn off the hot and cold supply lines to the faucet. (Not shown)
2. Remove the handle and dome.
ww.rohlhome.com
w
3. Remove the cartridge with a smooth jawed wrench or 17mm wrench
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
7
Installation Instructions
MAINTENANCE
4.
ww.rohlhome.com
w
4. Install new cartridge
5. Turn on supply lines and test for leaks. Not shown.
6. Install lever and dome
5.-6.
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
8
InstallationInstructions
Installation Instructions
ww.rohlhome.com
w
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
9
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.