®
R&S
ZN-Z5x
Calibration Units
User Manual
(=UÉÇ2)
1337.5957.02 ─ 01
User Manual
This User Manual describes the following models:
●
R&S®ZN-Z50, 3.5 mm (f), 2 ports, 9 kHz to 9 GHz (1335.6904.30)
●
R&S®ZN-Z50, 3.5 mm (f), 2 ports, 9 kHz to 26.5 GHz (1335.6904.32)
●
R&S®ZN-Z51, 3.5 mm (f), 2 ports, 100 kHz to 8.5 GHz (1319.5507.32)
●
R&S®ZN-Z51, 3.5 mm (f), 4 ports, 100 kHz to 8.5 GHz (1319.5507.34)
●
R&S®ZN-Z51, N (f), 2 ports, 100 kHz to 8.5 GHz (1319.5507.72)
●
R&S®ZN-Z51, N (f), 4 ports, 100 kHz to 8.5 GHz (1319.5507.74)
●
R&S®ZN-Z52, 3.5 mm (f), 4 ports, 100 kHz to 26.5 GHz (1335.6991.30)
●
R&S®ZN-Z53, N (f), 2 ports, 100 kHz to 18 GHz (1335.7046.72)
●
R&S®ZN-Z53, 3.5 mm (f), 2 ports, 100 kHz to 26.5 GHz (1335.7046.32)
●
R&S®ZN-Z54, 2.92 mm (f), 2 ports, 9 kHz to 40 GHz (1335.7117.92)
●
R&S®ZN-Z55, 2.4 mm (f), 2 ports, 9 kHz to 50 GHz (1335.7181.42)
R&S®ZN-Z51 type N models can optionally be equipped with port adapters for
connector types N (m), 3.5 mm (m), 7/16 (f), 7/16 (m) or 4.3-10 (f). The adapters
are not removable; mixing port types is possible.
For option names and ordering information, see the R&S®ZN-Z5x data sheet.
© 2017 Rohde & Schwarz GmbH & Co. KG
Mühldorfstr. 15, 81671 München, Germany
Phone: +49 89 41 29 - 0
Fax: +49 89 41 29 12 164
Email: info@rohde-schwarz.com
Internet: www.rohde-schwarz.com
Subject to change – Data without tolerance limits is not binding.
R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of their owners.
R&S®ZN-Z5x
Contents
1 Safety Instructions................................................................ 3
2 USB Connection to the Network Analyzer.......................... 6
3 Function of the Status LED...................................................6
4 Performing an Automatic Calibration.................................. 7
5 Accuracy Considerations..................................................... 7
6 User Characterization............................................................8
7 microSD Card.........................................................................8
Contents
8 Mounting the Calibration Unit.............................................. 8
1 Safety Instructions
This calibration unit has been designed and tested in accordance with the EC
Certificate of Conformity and has left the manufacturer’s plant in a condition fully
complying with safety standards.
General safety considerations
To maintain this condition and to secure safe operation, you must observe
all instructions and warnings given in this manual and in the user manual of
the R&S network analyzer.
3User Manual 1337.5957.02 ─ 01
Loading...