The R&S SMCVB-KV17 is a waveform library that provides waveform files in accordance with various digital TV standards.
This user manual contains a reference description of the functionality that the waveform library provides. All functions not discussed in this manual are described in the
R&S SMCV100B user manual. The latest version is available at:
www.rohde-schwarz.com/manual/SMCV100B
1.1Key Features
The R&SSMCVB-KV17 features:
●
●
Welcome to the R&SSMCVB-KV17 Option
Documentation Overview
Numerous waveform files in accordance with various digital TV standards
Efficient use with dedicated waveforms as interferer signal
1.2Installation
You can find detailed installation instructions in the supplement document of the
R&S SMCV100B user manual and in the R&S SMCV100B user manual describing
firmware versions later than FW 4.70.176.xx of the R&S SMCV100B.
1.3Documentation Overview
This section provides an overview of the R&S SMCV100B user documentation. Unless
specified otherwise, you find the documents on the R&S SMCV100B product page at:
www.rohde-schwarz.com/manual/smcv100b
1.3.1Getting Started Manual
Introduces the R&S SMCV100B and describes how to set up and start working with the
product. Includes basic operations, typical measurement examples, and general information, e.g. safety instructions, etc. A printed version is delivered with the instrument.
1.3.2User Manuals and Help
Separate manuals for the base unit and the software options are provided for download:
●
Base unit manual
7User Manual 1179.2825.02 ─ 01
R&S®SMCVB-KV17
●
The contents of the user manuals are available as help in the R&S SMCV100B. The
help offers quick, context-sensitive access to the complete information for the base unit
and the software options.
All user manuals are also available for download or for immediate display on the Internet.
1.3.3Service Manual
Describes the performance test for checking compliance with rated specifications, firmware update, troubleshooting, adjustments, installing options and maintenance.
Welcome to the R&S SMCVB-KV17 Option
Documentation Overview
Contains the description of all instrument modes and functions. It also provides an
introduction to remote control, a complete description of the remote control commands with programming examples, and information on maintenance, instrument
interfaces and error messages. Includes the contents of the getting started manual.
Software option manual
Contains the description of the specific functions of an option. Basic information on
operating the R&S SMCV100B is not included.
The service manual is available for registered users on the global Rohde & Schwarz
information system (GLORIS):
https://gloris.rohde-schwarz.com
1.3.4Instrument Security Procedures
Deals with security issues when working with the R&S SMCV100B in secure areas. It
is available for download on the Internet.
1.3.5Printed Safety Instructions
Provides safety information in many languages. The printed document is delivered with
the product.
1.3.6Data Sheets and Brochures
The data sheet contains the technical specifications of the R&S SMCV100B. It also
lists the options and their order numbers and optional accessories.
The brochure provides an overview of the instrument and deals with the specific characteristics.
See www.rohde-schwarz.com/brochure-datasheet/smcv100b
8User Manual 1179.2825.02 ─ 01
R&S®SMCVB-KV17
1.3.7Release Notes and Open Source Acknowledgment (OSA)
The release notes list new features, improvements and known issues of the current
firmware version, and describe the firmware installation.
The open-source acknowledgment document provides verbatim license texts of the
used open source software.
See www.rohde-schwarz.com/firmware/smcv100b
1.3.8Application Notes, Application Cards, White Papers, etc.
These documents deal with special applications or background information on particular topics.
See www.rohde-schwarz.com/application/smcv100b
Welcome to the R&S SMCVB-KV17 Option
Documentation Overview
9User Manual 1179.2825.02 ─ 01
R&S®SMCVB-KV17
2Available Waveform Files
This chapter contains the description of the available waveform files sorted by standard.
The files of the following standards are decodable and seamless:
●
●
●
●
●
●
The files of the following standards are not seamless and therefore not decodable:
●
●
●
●
Available Waveform Files
8VSB
8VSB (see Chapter 2, "Available Waveform Files", on page 10)
DVB-T (see Chapter 2, "Available Waveform Files", on page 10)
DVB-T2 (see Chapter 2.4, "DVB-T2", on page 14)
FM Jamer (see Chapter 2.5, "FM Jamer", on page 30)
T-DMB/DAB (see Chapter 2.8, "T-DMB/DAB", on page 31)
CMMB (see Chapter 2.9, "CMMB", on page 34)
DTMB (see Chapter 2.2, "DTMB", on page 11)
ISDB-T (see Chapter 2.6, "ISDB-T", on page 30)
MediaFlo (see Chapter 2.7, "MediaFlo", on page 31)
ATSC 3.0 (see Chapter 2.10, "ATSC 3.0", on page 35)
The spectra comply with the corresponding standard. However, there could be errors in
the FEC i.e. a receiver locks but may show bit errors.
2.18VSB
The 8 VSB files play a signal compliant with the ATSC standard "Digital Television
Standard (A/53), Revision C; Annex D". The payload is null packets.
2.1.18VSB_Center.wv
All frequency adjustments are referenced to the center of the output spectrum (see Fig-
ure 2-1).
Figure 2-1: 8VSB_Center
10User Manual 1179.2825.02 ─ 01
R&S®SMCVB-KV17
2.1.28VSB_Pilot.wv
All frequency adjustments are referenced to the pilot of the output spectrum (see Fig-
ure 2-2)
Figure 2-2: 8VSB_Pilot
2.2DTMB
Available Waveform Files
DTMB
2.2.1dtmb_8MHz_MC_16QAM.wv
Not decodable DTMB signal:
●
Multicarrier
●
16QAM
●
Channel bandwidth: 8MHz
2.2.2dtmb_8MHz_SC_4QAM.wv
Not decodable DTMB signal:
●
Single-carrier
●
4QAM
●
Channel bandwidth: 8MHz
2.2.3dtmb_8MHz_SC_16QAM.wv
Not decodable DTMB signal:
●
Single-carrier
●
16QAM
●
Channel bandwidth: 8MHz
11User Manual 1179.2825.02 ─ 01
R&S®SMCVB-KV17
2.2.4dtmb_8MHz_SC_32QAM.wv
Not decodable DTMB signal:
●
●
●
●
2.2.5dtmb_8MHz_SC_64QAM.wv
Not decodable DTMB signal:
●
●
●
Available Waveform Files
DVB-T
Single-carrier
32QAM
PN420 header
Channel bandwidth: 8 MHz
Single-carrier
64QAM
Channel bandwidth: 8 MHz
2.2.6dtmb_8MHz_SC_32QAM_PN595.wv
Not decodable DTMB signal:
●
Single-carrier
●
32QAM
●
PN595 header
●
Channel bandwidth: 8MHz
2.3DVB-T
The DVB-T signals are generated according to ETSI EN 300 744 as follows:
●
Code rate: 3/4
●
Constellation: 64QAM
●
FFT mode: 2K
●
Guard interval: 1/32.
The payload is null packets.
2.3.1DVB-T_5MHz.wv
One DVB-T signal:
●
Channel bandwidth: 5MHz
12User Manual 1179.2825.02 ─ 01
Loading...
+ 26 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.