Rohde&Schwarz R&S®TSMA6B-BP Manual Manual
®
R&S
TSMA6B-BP
Battery Pack Unit
Manual
(a0èñ2)
4900909902
Version 02
This document describes the following R&S®TSMA6B accessory:
●
R&S®TSMA6B-BP Battery Pack Unit (4900.9001.20)
●
R&S®MNT-BP99WH Batteries (3660.9109.02) for R&S®TSMA6B-BP
© 2022 Rohde & Schwarz GmbH & Co. KG
Muehldorfstr. 15, 81671 Muenchen, Germany
Phone: +49 89 41 29 - 0
Email: info@rohde-schwarz.com
Internet: www.rohde-schwarz.com
Subject to change – data without tolerance limits is not binding.
R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
4900.9099.02 | Version 02 | R&S®TSMA6B-BP
Throughout this manual, products from Rohde & Schwarz are indicated without the ® symbol, e.g.
R&S®TSMA6B is indicated as R&S TSMA6B.
R&S®TSMA6B-BP
Contents
Contents
1 Safety and regulatory information....................................... 5
1.1 Safety instructions................................................................................5
1.2 Labels on the product.......................................................................... 6
1.3 Warning messages in the documentation..........................................7
2 Welcome................................................................................. 8
2.1 Documentation overview..................................................................... 8
2.1.1 Manual.................................................................................................... 8
2.1.2 Lihtium-ion batteries safety instruction....................................................8
2.1.3 Data sheets and brochures.....................................................................8
2.2 Key features.......................................................................................... 9
3 Preparing for use................................................................. 10
3.1 Unpacking the instrument..................................................................10
3.2 Connecting to power.......................................................................... 10
3.2.1 Connecting to a vehicle DC power supply via cigarette lighter............. 10
3.2.2 Connecting to the vehicle power supply via terminal............................ 11
3.2.3 Connecting to an AC power supply.......................................................11
3.3 Inserting and removing the batteries................................................12
3.4 Charging the batteries for the first time........................................... 13
4 Instrument tour.................................................................... 14
4.1 Front panel view..................................................................................14
4.2 Rear panel view...................................................................................14
5 Connecting R&S TSMA6/6B with R&S TSMA6B-BP-BP...17
6 Operating the battery pack................................................. 20
6.1 Standalone operation......................................................................... 20
3Manual 4900.9099.02 ─ 02
R&S®TSMA6B-BP
6.2 Host-controlled operation.................................................................. 20
6.3 Power states........................................................................................21
6.3.1 Enabling auto power............................................................................. 21
6.3.2 Standby / power On/Off.........................................................................21
6.4 Monitoring the battery charge status................................................22
6.4.1 Checking the charge status of the individual battery............................ 22
6.4.2 Rear panel LEDs in standalone operation............................................ 23
6.4.3 Rear Panel LEDs in host-controlled operation......................................24
6.4.4 R&S TSMA6/6B web-GUI / tray icon (only host-controlled mode)........24
Contents
7 Transporting.........................................................................25
8 Maintenance, storage and disposal................................... 26
8.1 Cleaning...............................................................................................26
8.2 Handling batteries...............................................................................26
8.2.1 Charging the batteries...........................................................................27
8.2.2 Hot swapping battery exchange............................................................29
8.3 Storage.................................................................................................30
8.4 Disposal............................................................................................... 30
9 Contacting customer support............................................ 32
Index..................................................................................... 33
4Manual 4900.9099.02 ─ 02
R&S®TSMA6B-BP
Safety and regulatory information
Safety instructions
1 Safety and regulatory information
The product documentation helps you use the product safely and efficiently. Follow the instructions provided here and in the following chapters.
Intended use
The R&S TSMA6B-BP is intended to enhance the R&S TSMx scanner family via
a vibration-proof mechanical connection to allow mobile operation. It contains two
easily accessible, rechargeable and hot-swappable batteries.
Where do I find safety information?
Safety information is part of the product documentation. It warns you of potential
dangers and gives instructions on how to prevent personal injury or damage
caused by dangerous situations. Safety information is provided as follows:
●
In Chapter 1.1, "Safety instructions", on page 5. The same information is
provided in many languages as printed "Safety Instructions". The printed
"Safety Instructions" are delivered with the product.
●
Throughout the documentation, safety instructions are provided when you
need to take care during setup or operation.
1.1 Safety instructions
The product contains exchangeable or built-in lithium polymer or lithium ion cells
or batteries. The use of the word battery in the following always means all types.
Only the battery contents are potentially hazardous. As long as a battery is
undamaged and the seals remain intact, there is no danger.
Impact, shock or heat can cause damage such as dents, punctures and other
deformations. A damaged battery poses a risk of personal injury. Handle a damaged or leaking battery with extreme care. Immediately ventilate the area since
the battery releases harmful gases. If you come into contact with the battery fluid,
immediately remove all contaminated clothing. Irritation can occur if the battery
fluid comes in contact with your skin or eyes. Immediately and thoroughly rinse
your skin or eyes with water and seek medical aid.
For safe handling, follow these rules:
●
Do not short-circuit the battery.
5Manual 4900.9099.02 ─ 02
R&S®TSMA6B-BP
●
Do not mechanically damage the battery. Do not open or disassemble the battery.
●
Do not expose the battery to high temperatures such as open flames, hot surfaces and sunlight.
●
Only use the battery with the designated Rohde & Schwarz product.
●
Only use the appropriate Rohde & Schwarz charger to charge the batteries. If
the batteries are improperly charged, there is a risk of explosion. For charging
and discharging temperature ranges, see the product documentation.
●
Replace exchangeable batteries only with the same battery type.
●
Store the battery in the product or use the product packaging.
●
Dispose of exchangeable batteries separately from normal household waste
as specified by the local waste disposal agency.
If you disregard these rules, you risk serious personal injury or even death due to
explosion, fire or hazardous chemical substances. The product documentation
provides further details.
Safety and regulatory information
Labels on the product
If exchangeable batteries or products with built-in batteries are defective, contact
the Rohde & Schwarz customer service. Rohde & Schwarz classifies the severity
of the defect. When returning batteries or Rohde & Schwarz products containing
batteries, use a carrier qualified to transport dangerous goods and notify the carrier of this classification. Follow the carrier’s transport stipulations in line with
IATA-DGR, IMDG-Code, ADR or RID.
Figure 1-1: Disposal information in line with EU battery directive
1.2 Labels on the product
Labels on the casing inform about:
●
Product and environment safety, see Table 1-1
●
Identification of the product, see bottom label of the R&S TSMA6B-BP.
6Manual 4900.9099.02 ─ 02
R&S®TSMA6B-BP
Safety and regulatory information
Warning messages in the documentation
Table 1-1: Labels regarding product and environment safety
Labeling in line with EN 50419 for disposal of electrical and electronic equipment after
the product has come to the end of its service life. For more information, see "Dispos-
ing electrical and electronic equipment" on page 30.
Labeling in line with directive 2006/66/EC for disposal of batteries after they have come
to the end of their service life. For more information, see "Disposing batteries"
on page 30.
1.3 Warning messages in the documentation
A warning message points out a risk or danger that you need to be aware of. The
signal word indicates the severity of the safety hazard and how likely it will occur
if you do not follow the safety precautions.
NOTICE
Potential risks of damage. Could result in damage to the supported product or to
other property.
7Manual 4900.9099.02 ─ 02
R&S®TSMA6B-BP
Documentation overview
Welcome
2 Welcome
2.1 Documentation overview
This section provides an overview of the R&S TSMA6B-BP user documentation.
Unless specified otherwise, you find the documents on the R&S TSMA6B-BP
product page at:
www.rohde-schwarz.com/manual/tsmx
2.1.1 Manual
Introduces the R&S TSMA6B-BP, includes general information, e.g. safety
instructions and describes how to exchange and charge batteries. A printed version is delivered with the product. The R&S TSMA6B user manual includes basic
setups and typical measurement examples.
2.1.2 Lihtium-ion batteries safety instruction
Contains safety instructions, operating conditions and further important information. The printed document is delivered with the product.
2.1.3 Data sheets and brochures
The data sheet contains the technical specifications of the R&S TSMA6B-BP. It
also lists optional accessories.
The brochure provides an overview of the product and deals with the specific
characteristics.
See www.rohde-schwarz.com/brochure-datasheet/tsmx
8Manual 4900.9099.02 ─ 02
R&S®TSMA6B-BP
Welcome
Key features
2.2 Key features
The R&S TSMA6B-BP enhances the R&S TSMA6/6B device to a portable measurement solution based on a battery-powered system.
Key Features
●
Power supply for R&S TSMA6/6B in portable applications
●
Power supply for up to 4 additional devices (mobile network scanner
R&S TSME6 and R&S TSME30DC and R&S TSME44DC downconverter)
●
Usage as a power buffer for connected devices in scenarios with cracking or
shortly interrupted external DC power supplies / (e.g. in vehicles)
●
Dual battery bay for hot-swap support and endless portable mode
●
In-bay charging via smart battery controller
●
Charge indicator LED for each individual battery bay
●
Batteries (R&S MNT-BP99WH) have worldwide approval
●
SMBus interface with connected R&S TSMA6/6B
9Manual 4900.9099.02 ─ 02
R&S®TSMA6B-BP
Preparing for use
Connecting to power
3 Preparing for use
Here, you can find basic information about setting up the product for the first time.
3.1 Unpacking the instrument
1. Unpack the product carefully.
2. Retain the original packing material. Use it when transporting or shipping the
product later.
3. Using the delivery notes, check the equipment for completeness.
4. Check the equipment for damage.
If the delivery is incomplete or equipment is damaged, contact
Rohde & Schwarz.
3.2 Connecting to power
This section describes how to connect the R&S TSMA6B-BP to a power supply
unit.
You connect the R&S TSMA6B-BP to a power supply unit to recharge the batteries. For details, see Chapter 3.4, "Charging the batteries for the first time",
on page 13.
3.2.1 Connecting to a vehicle DC power supply via cigarette
lighter
The R&S TSMA6B-BP is delivered with a 12 V DC power supply cable with a cigarette lighter connector.
1. Check the rating of the vehicle DC power supply. It has to be 12 V.
2. Connect the 7-pin connector to DC IN.
10Manual 4900.9099.02 ─ 02
Loading...