Rohde&Schwarz R&S®SML-Z2 Operating Manual User Manual
Instruments
Division
Service Kit for SML
SML-Z2
1090.5203.02
Printed in the Federal
Republic of Germany
1090.5255.54 1 E-2
Contents
1 Service program ........................................................................................................................8
1.1 Overview.................................................................................. Fehler! Textmarke nicht definiert.
1.2 Installation..................................................................................................................................4
1.3 Program Description.................................................................................................................4
1.3.1 Selection of the Interface......................................................................................................5
1.3.2 Main View.............................................................................................................................5
1.3.3 Module Test..........................................................................................................................5
1.3.4 Calibration ............................................................................................................................5
1.3.5 Direct Mode..........................................................................................................................6
1.3.6 Help......................................................................................................................................6
2 External Level Calibration............................................................................................................7
2.1 Overview..................................................................................................................................... 8
2.2 Installation..................................................................................................................................9
2.3 Preparations.............................................................................................................................10
2.4 Program Description...............................................................................................................10
2.4.1 Entry of IEC/IEEE Bus Address .........................................................................................10
2.4.2 Calibration ..........................................................................................................................10
2.4.3 Log File...............................................................................................................................11
2.4.3.1 Header............................................................................................................................11
2.4.3.2 Detector Linearity............................................................................................................11
2.4.3.3 Level Correction Data.....................................................................................................11
2.4.3.4 IQ Temperature Correction Data....................................................................................11
1090.5255.54 2 E-2
SML Service Program
1 Service program
1.1 Overview
The SML Service Program is used to support troubleshooting and module tes ting. It enables operation
of the internal control bits and reading out of the available diagnostic points. In addition, the program can
be used to transfer basic remote-control commands. The program runs under Windows (95, 98, NT and
2000). The instrument c an be remote-contr olled via IEC bus or RS232 interface. Ex ternal level calibration is possible in conjunction with a power meter of the type Rohde & Schwarz NRVD that is connected
to the IEC bus.
1090.5255.54 3 E-2
Service Program SML
1.2 Installation
To install the program under W indows (95, 98, NT or 2000) insert the installation disk 1 into your drive
and call up the "setup.exe" file. Follow the instructions of the ins tallation program . The service progr am
requires the CVI runtime engine, which will be installed if it is not yet available.
1090.5255.54 4 E-2
Loading...