Rohde&Schwarz R&S®RT-Z2T User Manual

®

R&S

RT-Z2T
Probe Interface Adapter
Manual

(=J[á2)

1326438302
Version 03

This manual describes the R&S RT-Z2T probe interface adapter (1338.0007.02).

© 2022 Rohde & Schwarz GmbH & Co. KG

Muehldorfstr. 15, 81671 Muenchen, Germany

Phone: [phone] - 0

Email: [e-mail]

Internet: www.rohde-schwarz.com

Subject to change – Data without tolerance limits is not binding.

R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.

TEKTRONIX, TEK, and TEKPROBE are registered trademarks of Tektronix, Inc.

Trade names are trademarks of the owners.

1326.4383.02 | Version 03 | R&S®RT-Z2T

Throughout this manual, products from Rohde & Schwarz are indicated without the ® symbol, e.g.
R&S®RT-Z2T is indicated as R&S RT-Z2T.

R&S®RT-Z2T

Product Description

Usage Information

1 Product Description

The R&S RT-Z2T probe interface adapter is a product designed to connect a ser­ies of active Tektronix oscilloscope probes with TekProbe BNCTM level II interface
to every R&S oscilloscope that is equipped with the Rohde & Schwarz probe

interface.

The adapter provides power to operate the probe. The R&S oscilloscope is adjus­ted to the correct settings by selecting the probe from a list of predefined probes
in the probe menu of the oscilloscope.

1.1 Supported Tektronix Probes

The following probes are supported by the R&S RT-Z2T adapter:

●

Single-ended probes: P6205, P6243, P6245, P6241, P6249

●

Current probes: TCP202

●

Differential probes: P6246, P6247, P6248, P6250, P6251

●

High-voltage differential probes: P5205, P5210

●

Electro-optical probes: P6701B, P6703B, P6711, P6713

1.2 Usage Information

The R&S RT-Z2T probe adapter is an add-on probe adapter, indented to be used
at laboratory or test and measurement areas. These areas are used for analysis,
testing and servicing and where equipment is operated by trained personnel.

3Manual 1326.4383.02 ─ 03

R&S®RT-Z2T

Risk of injury

Use the accessory carefully to prevent electric shock, personal injury, or
damage. Read and observe the "Basic Safety Instructions" that are deliv­ered as a printed brochure.

Also, read and observe the safety instructions of the oscilloscope the
accessory is connected to.

Device Description

1.3 Deliveries

The R&S RT-Z2T delivery package contains the following items:

●

R&S RT-Z2T probe interface adapter

●

Manual

●

"Basic Safety Instructions" brochure

1.4 Inspecting the Contents

●

Inspect the package for damage.
Keep a damaged package and the cushioning material until the contents have
been checked for completeness and the device has been tested.
If the packaging material shows any signs of stress, notify the carrier and your
Rohde & Schwarz service center. Keep the package and cushioning material
for inspection.

●

Inspect the product.
If there is any damage or defect, or if the R&S RT-Z2T does not operate prop­erly, notify your Rohde & Schwarz service center.

2 Device Description

The R&S probe interface of the R&S RT-Z2T probe interface adapter is attached
to a Rohde & Schwarz oscilloscope.

4Manual 1326.4383.02 ─ 03