Rohde&Schwarz R&S®QAR50 getting started Getting started
R&S®QAR50
Radome Tester
Getting Started
(;Ýaä2)
1179498602
Version 02
This document describes the following R&S®QAR50 models and options:
●
R&S®QAR50 (1343.0099K02/03)
© 2022 Rohde & Schwarz GmbH & Co. KG
Muehldorfstr. 15, 81671 Muenchen, Germany
Phone: +49 89 41 29 - 0
Email: info@rohde-schwarz.com
Internet: www.rohde-schwarz.com
Subject to change – data without tolerance limits is not binding.
R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
1179.4986.02 | Version 02 | R&S®QAR50
Throughout this manual, products from Rohde & Schwarz are indicated without the ® symbol, e.g. R&S®QAR50 is indicated as
R&S QAR50.
R&S®QAR50
Contents
Contents
1 Safety and regulatory information........................................................5
1.1 Safety instructions........................................................................................................5
1.2 Labels on the product...................................................................................................7
1.3 Warning messages in the documentation.................................................................. 8
1.4 Korea certification class A........................................................................................... 8
2 Documentation overview.......................................................................9
3 Welcome............................................................................................... 10
4 Preparing for use..................................................................................11
4.1 Choosing the operating site.......................................................................................11
4.2 Unpacking and checking............................................................................................ 11
4.3 Installing the R&S QAR50.......................................................................................... 14
4.4 Considerations for test setup.................................................................................... 19
4.5 Connecting the R&S QAR50...................................................................................... 20
4.6 Switching on or off......................................................................................................21
4.7 Operating system........................................................................................................21
5 Instrument tour.....................................................................................23
5.1 System overview......................................................................................................... 23
5.1.1 Connector board........................................................................................................... 24
5.1.2 Antenna cluster............................................................................................................. 25
5.1.3 Absorbers......................................................................................................................25
5.1.4 Mounting rail for the verification kit................................................................................25
5.1.5 Calibration sphere......................................................................................................... 25
5.1.6 Supporting feet..............................................................................................................26
5.1.7 Mounting holes..............................................................................................................26
5.2 Connectors and labels................................................................................................26
5.2.1 AC power supply........................................................................................................... 27
5.2.2 Power button................................................................................................................. 28
5.2.3 LAN interface................................................................................................................ 28
3Getting Started 1179.4986.02 ─ 02
R&S®QAR50
5.2.4 USB ports......................................................................................................................28
5.2.5 DisplayPort connector................................................................................................... 29
5.2.6 Device ID.......................................................................................................................29
Contents
4Getting Started 1179.4986.02 ─ 02
R&S®QAR50
Safety and regulatory information
Safety instructions
1 Safety and regulatory information
The product documentation helps you use the product safely and efficiently. Follow the
instructions provided here and in the following chapters.
Intended use
The product is intended for the development, production and verification of electronic
components and devices in industrial, administrative, and laboratory environments.
Use the product only for its designated purpose. Observe the operating conditions and
performance limits stated in the data sheet.
Where do I find safety information?
Safety information is part of the product documentation. It warns you of potential dangers and gives instructions on how to prevent personal injury or damage caused by
dangerous situations. Safety information is provided as follows:
●
In Chapter 1.1, "Safety instructions", on page 5. The same information is provided in many languages as printed "Safety Instructions". The printed "Safety
Instructions" are delivered with the product.
●
Throughout the documentation, safety instructions are provided when you need to
take care during setup or operation.
1.1 Safety instructions
Products from the Rohde & Schwarz group of companies are manufactured according
to the highest technical standards. To use the products safely, follow the instructions
provided here and in the product documentation. Keep the product documentation
nearby and offer it to other users.
Use the product only for its intended use and within its performance limits. Intended
use and limits are described in the product documentation such as the data sheet,
manuals and the printed "Safety Instructions". If you are unsure about the appropriate
use, contact Rohde & Schwarz customer service.
Using the product requires specialists or specially trained personnel. These users also
need sound knowledge of at least one of the languages in which the user interfaces
and the product documentation are available.
Never open the casing of the product. Only service personnel authorized by
Rohde & Schwarz are allowed to repair the product. If any part of the product is damaged or broken, stop using the product. Contact Rohde & Schwarz customer service at
http://www.customersupport.rohde-schwarz.com.
Lifting, carrying and installing the product
The product is heavy and must be installed and set up by trained staff. Always use
appropriate lifting equipment when you lift or carry the product, like a forklift when the
R&S QAR50 is still packed in its original box or a crane when it is unpacked.
5Getting Started 1179.4986.02 ─ 02
R&S®QAR50
Safety and regulatory information
Safety instructions
Lifting and carrying heavy items can cause structural or muscular injuries. Heavy items
can also cause other physical injuries like crushed body parts when they fall or tip over.
Because of its weight, at least two strong people are required to move or install the
R&S QAR50. During the installation, make sure that the installation site is only accessible to people working on the installation.
During transport, installation or repair, wear appropriate protective clothing that complies with your local rules and regulations. If you are unsure of which equipment to use,
ask your safety inspector.
We recommend to wear:
●
Safety shoes with toe cap and ESD protection.
●
Protective gloves
Always place the product on a stable, flat and level surface with the bottom of the product facing down. If the product is designed for different positions, secure the product so
that it cannot fall over.
Choosing the operating site
Only use the product indoors. The product casing is not waterproof. Water that enters
can electrically connect the casing with live parts, which can lead to electric shock,
serious personal injury or death if you touch the casing. If Rohde & Schwarz provides
accessories designed for your product, e.g. a carrying bag, you can use the product
outdoors.
Unless otherwise specified, you can operate the product up to an altitude of 2000 m
above sea level. The product is suitable for pollution degree 2 environments where
nonconductive contamination can occur. For more information on environmental conditions such as ambient temperature and humidity, see the data sheet.
Connecting to power
The product is an overvoltage category II product. Connect the product to a fixed
installation used to supply energy-consuming equipment such as household appliances and similar loads. Keep in mind that electrically powered products have risks, such
as electric shock, fire, personal injury or even death.
Take the following measures for your safety:
●
Before switching on the product, ensure that the voltage and frequency indicated
on the product match the available power source. If the power adapter does not
adjust automatically, set the correct value and check the rating of the fuse.
●
Only use the power cable delivered with the product. It complies with country-specific safety requirements. Only insert the plug into an outlet with protective conductor terminal.
●
Only use intact cables and route them carefully so that they cannot be damaged.
Check the power cables regularly to ensure that they are undamaged. Also ensure
that nobody can trip over loose cables.
●
If the product needs an external power supply, use the power supply that is delivered with the product or that is recommended in the product documentation or a
power supply that conforms to the country-specific regulations.
6Getting Started 1179.4986.02 ─ 02
R&S®QAR50
Safety and regulatory information
Labels on the product
●
Only connect the product to a power source with a fuse protection of maximum
20 A.
●
Ensure that you can disconnect the product from the power source at any time.
Pull the power plug to disconnect the product. The power plug must be easily
accessible. If the product is integrated into a system that does not meet these
requirements, provide an easily accessible circuit breaker at the system level.
Cleaning the product
Use a dry, lint-free cloth to clean the product. When cleaning, keep in mind that the
casing is not waterproof. Do not use liquid cleaning agents.
Meaning of safety labels
Safety labels on the product warn against potential hazards.
Potential hazard
Read the product documentation to avoid personal injury or product damage.
Heavy product
Be careful when lifting, moving or carrying the product. Carrying the product requires a sufficient number of persons or transport equipment.
Electrical hazard
Indicates live parts. Risk of electric shock, fire, personal injury or even death.
Hot surface
Do not touch. Risk of skin burns. Risk of fire.
Protective conductor terminal
Connect this terminal to a grounded external conductor or to protective ground. This connection protects you against electric shock if an electric problem occurs.
1.2 Labels on the product
Labels on the casing inform about:
●
Personal safety, see "Meaning of safety labels" on page 7
●
Product and environment safety, see Table 1-1
●
Device information is provided on a sticker attached to the connector board.
For details, see Chapter 5.2.6, "Device ID", on page 29.
Table 1-1: Labels regarding product and environment safety
Labeling in line with EN 50419 for disposal of electrical and electronic equipment after the product has come to the end of its service life.
For more information, see the user manual.
7Getting Started 1179.4986.02 ─ 02
R&S®QAR50
1.3 Warning messages in the documentation
Safety and regulatory information
Korea certification class A
A warning message points out a risk or danger that you need to be aware of. The signal word indicates the severity of the safety hazard and how likely it will occur if you do
not follow the safety precautions.
WARNING
Potentially hazardous situation. Could result in death or serious injury if not avoided.
CAUTION
Potentially hazardous situation. Could result in minor or moderate injury if not avoided.
NOTICE
Potential risks of damage. Could result in damage to the supported product or to other
property.
1.4 Korea certification class A
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기
바라며, 가정외의 지역에서 사용하는 것을 목적으로 합니다.
8Getting Started 1179.4986.02 ─ 02
R&S®QAR50
Documentation overview
2 Documentation overview
The user documentation for the R&S QAR50 consists of several documents.
Getting started
Introduces the R&S QAR50 and describes how to set up and start working with the
product. A printed version is included in the delivery.
User manual
Contains a description of the R&S QAR50 system, including the features available in
the R&S QAR50 application.
A digital version of the user manual in html format is available in the measurement
application.
Safety instructions
Contains safety instructions, operating conditions and further important information.
The printed safety instructions are part of the delivery.
Data sheet and brochure
The data sheet contains the technical specifications of the R&S QAR50, its options and
accessories.
The brochure provides an overview of the R&S QAR50 and its characteristics.
Open-source acknowledgment (OSA)
The open-source acknowledgment documents provide verbatim license texts of the
used open source software.
The OSAs is available in the measurement application ("Info" > "Open Source
Acknowledgement") and on the SSD in the folder C:\OpenSourceAgreement.
9Getting Started 1179.4986.02 ─ 02
Loading...