Rohde&Schwarz R&S®NGP800 Power Supply Series Getting Started Manual Getting started
®
R&S
NGP800
Power Supply Series
Getting Started
(Æ1Æ32)
5601560302
Version 11
This manual describes the following R&S®NGP800 models with firmware version
2.015 and higher:
●
R&S®NGP802 Two-channel 32V/20A Power Supply 400 W (5601.4007.05)
●
R&S®NGP822 Two-channel 64V/10A Power Supply 400 W (5601.4007.06)
●
R&S®NGP804 Four-channel 32V/20A Power Supply 800 W (5601.4007.02)
●
R&S®NGP824 Four-channel 64V/10A Power Supply 800 W (5601.4007.03)
●
R&S®NGP814 Four-channel 32V/20A & 64V/10A Power Supply 800 W
(5601.4007.04)
© 2022 Rohde & Schwarz GmbH & Co. KG
Muehldorfstr. 15, 81671 Muenchen, Germany
Phone: +49 89 41 29 - 0
Email: info@rohde-schwarz.com
Internet: www.rohde-schwarz.com
Subject to change – data without tolerance limits is not binding.
R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
5601.5603.02 | Version 11 | R&S®NGP800
Throughout this manual, products from Rohde & Schwarz are indicated without the ® symbol, e.g.
R&S®NGP800 is indicated as R&S NGP800.
R&S®NGP800
Contents
1 Safety information................................................................. 5
2 Korea certification class A....................................................6
3 Documentation overview...................................................... 7
3.1 Manuals..................................................................................................7
3.2 Data sheet..............................................................................................7
3.3 Calibration certificate........................................................................... 8
3.4 Release notes, open source acknowledgment.................................. 8
4 Welcome to R&S NGP800..................................................... 9
Contents
5 Putting into operation..........................................................11
5.1 Safety................................................................................................... 13
5.2 Intended operation..............................................................................14
5.3 Unpacking and checking the instrument..........................................16
5.4 Setting up the instrument.................................................................. 17
5.4.1 Bench operation....................................................................................18
5.4.2 Rack mounting...................................................................................... 19
6 Instrument tour.................................................................... 20
6.1 Overview of controls.......................................................................... 20
6.1.1 Front panel............................................................................................20
6.1.2 Rear panel............................................................................................ 22
6.2 Switching on the instrument..............................................................25
7 Trying out the instrument................................................... 27
7.1 Setting the output voltage and current limit.................................... 27
7.2 Activating the channels output......................................................... 28
3Getting Started 5601.5603.02 ─ 11
R&S®NGP800
Contents
8 Maintenance and support................................................... 30
8.1 Maintenance........................................................................................ 30
8.2 Contacting customer support............................................................31
Index..................................................................................... 32
4Getting Started 5601.5603.02 ─ 11
R&S®NGP800
Safety information
1 Safety information
The product documentation helps you use the R&S NGP800 safely and efficiently. Follow the instructions provided here and in the printed "Basic Safety
Instructions". Keep the product documentation nearby and offer it to other users.
Intended use
The R&S NGP800 is intended for the development, production and verification of
electronic components and devices in industrial, administrative, and laboratory
environments. Use the R&S NGP800 only for its designated purpose. Observe
the operating conditions and performance limits stated in the data sheet.
Where do I find safety information?
Safety information is part of the product documentation. It warns you about the
potential dangers and gives instructions how to prevent personal injuries or damage caused by dangerous situations. Safety information is provided as follows:
●
The printed "Basic Safety Instructions" provide safety information in many languages and are delivered with the R&S NGP800.
●
Throughout the documentation, safety instructions are provided when you
need to take care during setup or operation.
5Getting Started 5601.5603.02 ─ 11
R&S®NGP800
Korea certification class A
2 Korea certification class A
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하
시기 바라며, 가정외의 지역에서 사용하는 것을 목적으로 합니다.
6Getting Started 5601.5603.02 ─ 11
R&S®NGP800
Documentation overview
Data sheet
3 Documentation overview
This section provides an overview of the R&S NGP800 user documentation.
3.1 Manuals
You find the documents on the R&S NGP800 product page at:
www.rohde-schwarz.com/product/ngp800
Getting started
Introduces the R&S NGP800 power supply series and describes how to set up
and start working with the instrument. The printed document is delivered with the
instrument.
User manual
Contains the description of all instrument modes and functions. It also provides
an introduction to remote control, a complete description of the remote control
commands with programming examples, and information on maintenance and
instrument interfaces. Includes the contents of the getting started manual.
The online version of the user manual provides the complete contents for immediate display on the internet.
Basic safety instructions
Contains safety instructions, operating conditions and further important information. The printed document is delivered with the instrument.
Instrument security procedures manual
Deals with security issues when working with the R&S NGP800 in secure areas.
3.2 Data sheet
The datasheet contains the technical specifications of the R&S NGP800 power
supply series. It also lists all options with their order numbers and accessories.
7Getting Started 5601.5603.02 ─ 11
R&S®NGP800
Release notes, open source acknowledgment
See www.rohde-schwarz.com/brochure-datasheet/ngp800
Documentation overview
3.3 Calibration certificate
The document is available on https://gloris.rohde-schwarz.com/calcert. You need
the device ID of your instrument, which you can find on a label on the rear panel.
3.4 Release notes, open source acknowledgment
The release notes list new features, improvements and known issues of the current firmware version, and describe the firmware installation. The open source
acknowledgment document provides verbatim license texts of the used open
source software. It can also be read directly on the instrument.
See www.rohde-schwarz.com/firmware/ngp800.
8Getting Started 5601.5603.02 ─ 11
R&S®NGP800
Welcome to R&S NGP800
4 Welcome to R&S NGP800
The two or four-channel power supply series are based on a primary switchedmode regulator with power factor correction. This concept allows the instrument
to achieve highest accuracy and lowest residual ripple.
The R&S NGP800 power supply series feature galvanically isolated, overload and
short-circuit proof outputs. The outputs can be connected in parallel and serial to
achieve higher currents or voltages.
Multi-purpose protection functions, such as overcurrent protection (OCP), overvoltage protection (OVP) and overpower protection (OPP) can be set separately
for each channel. If the set limit is reached, the affected output channel is automatically turned off and an indicator icon (
overcurrent protection can also be linked to the other channels. If the current
exceeds the limit on the affected channel, all linked channels will be switched off.
, , ) flashes on the display. The
The R&S NGP800 power supply series are also protected from overheating. Each
channel is equipped with a temperature sensor that monitors the channel operating temperature for controlling the fan speed and overtemperature protection. If
the safe limit is exceeded, the output of the affected channel is switched off. The
channel must cool down to a defined threshold before the output can be switched
on again. Operations of the other channels are not affected. Also, the actual operating speed of the fans is monitored. If a fan is not running, e.g. rotor locked condition, all the outputs will be switched off to prevent overheating.
The R&S QuickArb function allows freely definable voltage and current sequences with a timeframe as short as 1 ms, e.g. to simulate different charging conditions of a battery. The voltage and current points can also be grouped in different
blocks which can be sequenced and repeated independently to achieve a flexible
arbitrary function generation.
With the R&S EasyRamp function, the R&S NGP800 power supply provides the
operating condition to ramp up the supply voltage within a defined timeframe up
to 10 s with 1 ms step size and it can be set independently for each channel. Furthermore, the channels can be sequenced to ramp up the voltage output applied
at different times. With different slew rates and delays between channel outputs, it
is easy to test multi-voltage systems reliability. For the four-channel power supplies, the outputs can also be arranged into two independent subgroups.
The analog input and digital I/O interfaces at the rear panel can be activated with
an option key. The analog input allows you to control the output directly using
9Getting Started 5601.5603.02 ─ 11
R&S®NGP800
voltage signals (0 V to 5 V analog input corresponds to 0 to Vmax or Imax) and
can be set independently for each channel. The analog inputs are galvanically
isolated from the channel outputs, making the connection simpler. The digital I/O
provides an 8-bit control port for various control functions. Each pin can be configured as input or output port, to control any output channel, trigger an event, e.g.
start arbitrary or to indicate various conditions, e.g. over current protections.
The R&S NGP800 power supplies are equipped with a color 800 x 480 5 " TFT
LCD touch screen and a USB and LAN interfaces to control the instrument
remotely. The R&S NGP800 power supplies can also be remote controlled using
the GPIB option.
The user manual describes all instrument functionalities. The latest version is
available for download from the product homepage (http://www.rohde-
schwarz.com/product/ngp800).
Welcome to R&S NGP800
10Getting Started 5601.5603.02 ─ 11
Loading...