Rohde&Schwarz R&S®NGM200 Power Supply Series Getting Started Manual Getting started
®
R&S
NGL200/NGM200
Power Supply Series
Getting Started
(;ÜåD2)
1178872002
Version 07
This manual describes the following R&S®NGL/NGM models with firmware version 1.00 and higher:
●
R&S®NGL201 Single-channel power supply 60W (3638.3376.02)
●
R&S®NGL202 Two-channel power supply 120W (3638.3376.03)
●
R&S®NGM201 Single-channel power supply 60W (3638.4472.02)
●
R&S®NGM202 Two-channel power supply 120W (3638.4472.03)
© 2022 Rohde & Schwarz GmbH & Co. KG
Muehldorfstr. 15, 81671 Muenchen, Germany
Phone: +49 89 41 29 - 0
Email: info@rohde-schwarz.com
Internet: www.rohde-schwarz.com
Subject to change – data without tolerance limits is not binding.
R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
1178.8720.02 | Version 07 | R&S®NGL200/NGM200
Throughout this manual, products from Rohde & Schwarz are indicated without the ® symbol, e.g.
R&S®NGL200, R&S®NGM200 are indicated as R&S NGL/NGM.
R&S®NGL200/NGM200
Contents
1 Safety information................................................................. 5
2 Korea certification class A....................................................6
3 Documentation overview...................................................... 7
3.1 Manuals..................................................................................................7
3.2 Data sheet..............................................................................................8
3.3 Calibration certificate........................................................................... 8
3.4 Release notes, open source acknowledgment.................................. 8
3.5 Application notes, application cards, videos.....................................8
Contents
4 Welcome to R&S NGL/NGM.................................................. 9
5 Putting into operation..........................................................11
5.1 Safety................................................................................................... 13
5.2 Intended operation..............................................................................14
5.3 Unpacking and checking the instrument..........................................16
5.4 Setting up the instrument.................................................................. 17
5.4.1 Bench operation....................................................................................17
5.4.2 Rack mounting...................................................................................... 18
6 Instrument tour.................................................................... 19
6.1 Overview of controls.......................................................................... 19
6.1.1 Front panel............................................................................................19
6.1.2 Rear panel............................................................................................ 21
6.2 Switching on the instrument..............................................................24
7 Trying out the instrument................................................... 26
7.1 Setting the output voltage and current.............................................26
3Getting Started 1178.8720.02 ─ 07
R&S®NGL200/NGM200
7.2 Activating the channels output......................................................... 26
Contents
8 Maintenance and support................................................... 28
8.1 Maintenance........................................................................................ 28
8.2 Contacting customer support............................................................28
Index..................................................................................... 30
4Getting Started 1178.8720.02 ─ 07
R&S®NGL200/NGM200
Safety information
1 Safety information
The product documentation helps you use the R&S NGL/NGM safely and efficiently. Follow the instructions provided here and in the printed "Basic Safety
Instructions". Keep the product documentation nearby and offer it to other users.
Intended use
The R&S NGL/NGM is intended for the development, production and verification
of electronic components and devices in industrial, administrative, and laboratory
environments. Use the R&S NGL/NGM only for its designated purpose. Observe
the operating conditions and performance limits stated in the data sheet.
Where do I find safety information?
Safety information is part of the product documentation. It warns you about the
potential dangers and gives instructions how to prevent personal injuries or damage caused by dangerous situations. Safety information is provided as follows:
●
The printed "Basic Safety Instructions" provide safety information in many languages and are delivered with the R&S NGL/NGM.
●
Throughout the documentation, safety instructions are provided when you
need to take care during setup or operation.
5Getting Started 1178.8720.02 ─ 07
R&S®NGL200/NGM200
Korea certification class A
2 Korea certification class A
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하
시기 바라며, 가정외의 지역에서 사용하는 것을 목적으로 합니다.
6Getting Started 1178.8720.02 ─ 07
R&S®NGL200/NGM200
Documentation overview
Manuals
3 Documentation overview
This section provides an overview of the R&S NGL/NGM user documentation.
3.1 Manuals
You find the documents on the R&S NGL/NGM product page at:
www.rohde-schwarz.com/product/ngl200
www.rohde-schwarz.com/product/ngm200
Getting started
Introduces the R&S NGL/NGM power supply series and describes how to set up
and start working with the instrument. The printed document is delivered with the
instrument.
User manual
Contains the description of all instrument modes and functions. It also provides
an introduction to remote control, a complete description of the remote control
commands with programming examples, and information on maintenance and
instrument interfaces. Includes the contents of the getting started manual.
The online version of the user manual provides the complete contents for immediate display on the internet.
Basic safety instructions
Contains safety instructions, operating conditions and further important information. The printed document is delivered with the instrument.
Instrument security procedures manual
Deals with security issues when working with the R&S NGL/NGM in secure
areas.
7Getting Started 1178.8720.02 ─ 07
R&S®NGL200/NGM200
Application notes, application cards, videos
Documentation overview
3.2 Data sheet
The datasheet contains the technical specifications of the R&S NGL/NGM power
supply series. It also lists all options with their order numbers and accessories.
See www.rohde-schwarz.com/brochure-datasheet/ngl200
See www.rohde-schwarz.com/brochure-datasheet/ngm200
3.3 Calibration certificate
The document is available on https://gloris.rohde-schwarz.com/calcert. You need
the device ID of your instrument, which you can find on a label on the rear panel.
3.4 Release notes, open source acknowledgment
The release notes list new features, improvements and known issues of the current firmware version, and describe the firmware installation. The open source
acknowledgment document provides verbatim license texts of the used open
source software. It can also be read directly on the instrument.
See www.rohde-schwarz.com/firmware/ngl200.
See www.rohde-schwarz.com/firmware/ngm200.
3.5 Application notes, application cards, videos
These documents contain information about possible applications and background information on various topics:
See www.rohde-schwarz.com/appnotes/ngl.
See www.rohde-schwarz.com/appnotes/ngm.
8Getting Started 1178.8720.02 ─ 07
R&S®NGL200/NGM200
Welcome to R&S NGL/NGM
4 Welcome to R&S NGL/NGM
The one or two-channel power supply series are based on a classical transformer
concept with linear regulators. This concept allows the instrument to achieve
highest accuracy and lowest residual ripple.
The R&S NGL/NGM power supply series feature galvanically isolated, floating
overload and short-circuit proof outputs. When multiple channels are connected in
parallel, higher currents can be achieved. When connected in serial, higher voltages are achievable.
Multi-purpose protection functions are available for each channel which you can
set separately, such as overcurrent protection (OCP), overvoltage protection
(OVP) and overpower protection (OPP). If such a limit is reached, the affected
output channel is automatically turned off and an indicator icon (
on the display. In the case of two-channel power supply (R&S NGL202, R&S
NGM202), the overcurrent protection can be linked to the other channel. In this
case, the linked channel is turned off when the other channel reaches a limit.
, , ) blinks
Additionally, the R&S NGL/NGM is protected with overtemperature protection
(OTP). This safety feature protects the R&S NGL/NGM from overheating. When
the temperature in the power supply exceeds the OTP limit, the channel outputs
are automatically cut off.
The Arbitrary function allows a freely definable voltage and current sequences
with a timeframe as short as 1 ms. It allows varying the voltage or current during
a test sequence, for example to simulate different charging conditions of a battery. With "Ramp" function, the R&S NGL/NGM provides the operating condition
to ramp up the supply voltage within a defined timeframe of 10 ms to 10 s.
All R&S NGL/NGM power supplies are equipped with a color TFT display (800
pixels x 480 pixels) and enhanced with touch input capability. The
R&S NGL/NGM comes with a USB and LAN (LXI) interface. Equipped with a
wireless LAN (WLAN) option, you can establish a network connection wirelessly.
The digital I/O interface installed at the rear panel is activated with an option, it
allows a single trigger-in signal to control multi trigger-out signals on the power
supply, providing many possibilities to control outputs and associated devices in
the event when a trigger occurs.
The user manual contains description of the functionalities that the instrument
provides. The latest version is available for download at the product homepage
9Getting Started 1178.8720.02 ─ 07
Loading...