®
R&S
FS-SNS26/40/55
Smart Noise Source
Manual
(=VÞÀ2)
1338805002
Manual
Version 02
About the R&S®FS-SNS Smart Noise SourcesR&S®FS-SNS26/40/55
For Your Safety
1
About the R&S
®
FS-SNS Smart Noise
Sources
The R&S®FS-SNS smart noise sources are especially designed for
Rohde & Schwarz signal and spectrum analyzer families.
This manual applies to the following devices:
●
R&S FS-SNS26 (1338.8008.26)
●
R&S FS-SNS40 (1338.8008.40)
●
R&S FS-SNS55 (1338.8008.55)
You no longer have to enter complex ENR tables into the analyzer, or load them
manually via USB stick, thus avoiding errors due to wrong or incomplete tables.
The temperature is set automatically according to internal measurement. Uncertainty calculations are done automatically and can even be displayed in the result
screen.
Key features
●
Frequency range up to 26.5 GHz, 40 GHz or 55 GHz
●
ENR table automatically loaded
●
Automatic uncertainty calculation using ENR uncertainty and reflection coefficients table
●
Improved accuracy due to temperature setting
1.1 For Your Safety
The R&S®FS-SNS is designated for use in industrial, administrative, and laboratory environments. Use the R&S®FS-SNS only for its designated purpose.
Observe the safety and usage instructions documented in this manual, as well as
operating conditions and performance limits stated in the data sheet. The product
documentation helps you use the R&S®FS-SNS safely and efficiently. Keep the
product documentation in a safe place and pass it on to subsequent users.
●
Before use, inspect the RF and interface connectors of the R&S®FS-SNS for
damage. If there is any damage, contact Rohde & Schwarz for repair.
2Manual 1338.8050.02 ─ 02
Loading...