Rohde&Schwarz Cable Rider ZPH Instrument Security

R&S®ZPH
Cable and Antenna Analyzer
Instrument Security Procedures

(;Üëè2)

1178939002
Version 02

This document describes the types of memory and their usage in the R&S®ZPH Cable and Antenna Ana­lyzer.

© 2021 Rohde & Schwarz GmbH & Co. KG

Mühldorfstr. 15, 81671 München, Germany

Phone: [phone] - 0

Email: [e-mail]

Internet: www.rohde-schwarz.com

Subject to change – data without tolerance limits is not binding.

R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.

Trade names are trademarks of the owners.

1178.9390.02 | Version 02 | R&S®ZPH

Throughout this document, products from Rohde & Schwarz are indicated without the ® symbol , e.g. R&S®ZPH is indicated as

R&S ZPH.

R&S®ZPH

Contents

Contents

1 Overview................................................................................................. 3

2 Instrument Models Covered..................................................................4

3 Security Terms and Definitions............................................................ 4

4 Statement of Volatility............................................................................5

5 Instrument Sanitization Procedure.......................................................7

6 Validity of Instrument Calibration after Sanitization...........................8

Glossary: Terminology for instrument security procedures............. 8

Index........................................................................................................8

1 Overview

Securing important information is crucial in many applications.

Generally, highly secured environments do not allow any test equipment to leave the
area unless it can be proven that no user information leaves with the test equipment,
e.g. to be calibrated.

"Regarding sanitization, the principal concern is ensuring that data is not unintention­ally released" [1].

This document provides a statement regarding the volatility of the memory types used
and specifies the steps required to sanitize an instrument.

The procedures in this document follow "NIST Special Publication 800-88: Guidelines
for Media Sanitization" [1].

In addition, recommendations are provided to safeguard information on the R&S ZPH.

References

See the following literature for further information.

[1] Kissel Richard L. [et al.] Guidelines for Media Sanitization = Special Publication (NIST SP) =

NIST SP - 800-88 Rev 1. - Gaithersburg : [s.n.], December 17, 2014.

[2] National Industrial Security Program Authorization Office Defense Security Service (DSS)

Assessment and Authorization Process Manual (DAAPM). - May 6, 2019.

[3] ACSC Australian Cyber Security Centre Australian Government Information Security Manual,

January 2020.

3Instrument Security Procedures 1178.9390.02 ─ 02