®
R&S
NRX
Power Meter
Getting Started
(>HÔÔ2)
1424707002
Version 09
This document describes the following R&S®NRX models and options:
●
R&S®NRX (1424.7005K02)
●
R&S®NRX-B1 (1424.7805K02)
●
R&S®NRX-B4 (1424.8901K02)
●
R&S®NRX-B8 (1424.8301K02)
●
R&S®NRX-B9 (1424.8601K02)
●
R&S®NRX-K2 (1424.9208K02)
●
R&S®NRX-K4 (1424.9308K02)
© 2021 Rohde & Schwarz GmbH & Co. KG
Mühldorfstr. 15, 81671 München, Germany
Phone: +49 89 41 29 - 0
Email: info@rohde-schwarz.com
Internet: www.rohde-schwarz.com
Subject to change – data without tolerance limits is not binding.
R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
1424.7070.02 | Version 09 | R&S®NRX
Throughout this manual, products from Rohde & Schwarz are indicated without the ® symbol , e.g.
R&S®NRX is indicated as R&S NRX.
R&S®NRX
Contents
1 Safety and regulatory information....................................... 5
1.1 Safety Instructions................................................................................5
1.2 Labels on the product.......................................................................... 8
1.3 Warning messages in the documentation..........................................8
1.4 Korea certification class B...................................................................9
2 Documentation overview.................................................... 10
2.1 Getting started manual.......................................................................10
2.2 User manual........................................................................................ 10
Contents
2.3 Instrument security procedures........................................................ 10
2.4 Printed safety instructions.................................................................10
2.5 Data sheets and brochures................................................................ 11
2.6 Release notes and open source acknowledgment (OSA)...............11
3 Key features......................................................................... 12
4 Preparing for use................................................................. 13
4.1 Lifting and carrying............................................................................ 13
4.2 Unpacking and checking....................................................................13
4.3 Choosing the operating site.............................................................. 14
4.4 Setting up the product........................................................................14
4.4.1 Placing the product on a bench top...................................................... 14
4.4.2 Mounting the product in a rack..............................................................16
4.5 Considerations for test setup............................................................ 16
4.6 Connecting to power.......................................................................... 17
4.7 Connecting power sensors................................................................18
4.7.1 Sensor connectors A to D..................................................................... 18
3Getting Started 1424.7070.02 ─ 09
R&S®NRX
4.7.2 Optional interface for R&S NRT-Z sensors (R&S NRX-B9).................. 19
4.7.3 LAN interface........................................................................................ 20
4.7.4 USB 2.0 host interfaces........................................................................ 21
4.8 Connecting USB and external devices............................................. 21
4.9 Switching on or off............................................................................. 21
Contents
5 Instrument tour.................................................................... 23
5.1 Front panel tour.................................................................................. 23
5.1.1 Sensor connectors A and B.................................................................. 23
5.1.2 Module bay........................................................................................... 24
5.1.3 Touchscreen..........................................................................................25
5.1.4 Keys...................................................................................................... 25
5.1.5 USB host interface................................................................................ 27
5.1.6 On/standby key..................................................................................... 27
5.2 Rear panel tour....................................................................................28
5.2.1 Trig In / Out 2 and Out 1 / Trig Out connectors..................................... 28
5.2.2 Ethernet interface..................................................................................29
5.2.3 USB device interface............................................................................ 29
5.2.4 USB host interface................................................................................ 29
5.2.5 AC supply and power switch.................................................................29
5.2.6 IEC 625/IEEE 488 interface.................................................................. 30
5.2.7 Name plate............................................................................................30
5.2.8 Sensor connectors C and D..................................................................31
6 Contacting customer support............................................ 32
Index..................................................................................... 33
4Getting Started 1424.7070.02 ─ 09
R&S®NRX
Safety and regulatory information
Safety Instructions
1 Safety and regulatory information
The product documentation helps you use the product safely and efficiently. Follow the instructions provided here and in the following chapters.
Intended use
Combined with the supported R&S power sensors, the R&S NRX base unit is
intended for power measurements in development and production. The supported
R&S power sensors are listed in the data sheet. Observe the operating conditions
and performance limits stated in the data sheet.
Target audience
The target audience is developers and technicians. The required skills and experience in power measurements depend on the used operating concept. While
manual operation is suitable for beginners, remote control requires expertise in
power measurements.
Depending on the used R&S power sensor, the applications vary greatly. A profound knowledge of the intended application and test setup is recommended.
Where do I find safety information?
Safety information is part of the product documentation. It warns you of potential
dangers and gives instructions on how to prevent personal injury or damage
caused by dangerous situations. Safety information is provided as follows:
●
In Chapter 1.1, "Safety Instructions", on page 5. The same information is
provided in many languages as printed "Safety Instructions". The printed
"Safety Instructions" are delivered with the product.
●
Throughout the documentation, safety instructions are provided when you
need to take care during setup or operation.
1.1 Safety Instructions
Products from the Rohde & Schwarz group of companies are manufactured
according to the highest technical standards. To use the products safely, follow
the instructions provided here and in the product documentation. Keep the product documentation nearby and offer it to other users.
5Getting Started 1424.7070.02 ─ 09
R&S®NRX
Use the product only for its intended use and within its performance limits. Intended use and limits are described in the product documentation such as the data
sheet, manuals and the printed "Safety Instructions". If you are unsure about the
appropriate use, contact Rohde & Schwarz customer service.
Using the product requires specialists or specially trained personnel. These users
also need sound knowledge of at least one of the languages in which the user
interfaces and the product documentation are available.
Never open the casing of the product. Only service personnel authorized by
Rohde & Schwarz are allowed to repair the product. If any part of the product is
damaged or broken, stop using the product. Contact Rohde & Schwarz customer
service at http://www.customersupport.rohde-schwarz.com.
Lifting and carrying the product
The maximum weight of the product is provided in the data sheet. To move the
product safely, you can use lifting or transporting equipment such as lift trucks
and forklifts. Follow the instructions provided by the equipment manufacturer.
Safety and regulatory information
Safety Instructions
Choosing the operating site
Only use the product indoors. The product casing is not waterproof. Water that
enters can electrically connect the casing with live parts, which can lead to electric shock, serious personal injury or death if you touch the casing. If
Rohde & Schwarz provides accessories designed for your product, e.g. a carrying
bag, you can use the product outdoors.
Unless otherwise specified, you can operate the product up to an altitude of
2000 m above sea level. The product is suitable for pollution degree 2 environments where nonconductive contamination can occur. For more information on
environmental conditions such as ambient temperature and humidity, see the
data sheet.
Setting up the product
Always place the product on a stable, flat and level surface with the bottom of the
product facing down. If the product is designed for different positions, secure the
product so that it cannot fall over.
If the product has foldable feet, always fold the feet completely in or out to ensure
stability. The feet can collapse if they are not folded out completely or if the product is moved without lifting it. The foldable feet are designed to carry the weight of
the product, but not an extra load.
6Getting Started 1424.7070.02 ─ 09
R&S®NRX
If stacking is possible, keep in mind that a stack of products can fall over and
cause injury.
If you mount products in a rack, ensure that the rack has sufficient load capacity
and stability. Observe the specifications of the rack manufacturer. Always install
the products from the bottom shelf to the top shelf so that the rack stands
securely. Secure the product so that it cannot fall off the rack.
Connecting to power
The product is an overvoltage category II product. Connect the product to a fixed
installation used to supply energy-consuming equipment such as household
appliances and similar loads. Keep in mind that electrically powered products
have risks, such as electric shock, fire, personal injury or even death.
Take the following measures for your safety:
●
Before switching on the product, ensure that the voltage and frequency indicated on the product match the available power source. If the power adapter
does not adjust automatically, set the correct value and check the rating of the
fuse.
Safety and regulatory information
Safety Instructions
●
Only use the power cable delivered with the product. It complies with countryspecific safety requirements. Only insert the plug into an outlet with protective
conductor terminal.
●
Only use intact cables and route them carefully so that they cannot be damaged. Check the power cables regularly to ensure that they are undamaged.
Also ensure that nobody can trip over loose cables.
●
If the product needs an external power supply, use the power supply that is
delivered with the product or that is recommended in the product documentation or a power supply that conforms to the country-specific regulations.
●
Only connect the product to a power source with a fuse protection of maximum 20 A.
●
Ensure that you can disconnect the product from the power source at any
time. Pull the power plug to disconnect the product. The power plug must be
easily accessible. If the product is integrated into a system that does not meet
these requirements, provide an easily accessible circuit breaker at the system
level.
Cleaning the product
Use a dry, lint-free cloth to clean the product. When cleaning, keep in mind that
the casing is not waterproof. Do not use liquid cleaning agents.
7Getting Started 1424.7070.02 ─ 09
R&S®NRX
Safety and regulatory information
Warning messages in the documentation
Meaning of safety labels
Safety labels on the product warn against potential hazards.
Potential hazard
Read the product documentation to avoid personal injury or product damage.
Electrical hazard
Indicates live parts. Risk of electric shock, fire, personal injury or even death.
Hot surface
Do not touch. Risk of skin burns. Risk of fire.
Protective conductor terminal
Connect this terminal to a grounded external conductor or to protective ground. This
connection protects you against electric shock if an electric problem occurs.
1.2 Labels on the product
Labels on the casing inform about:
●
Personal safety, see "Meaning of safety labels" on page 8
●
Environment safety, see Table 1-1
●
Identification of the product, see Chapter 5.2.7, "Name plate", on page 30.
Table 1-1: Labels regarding environment safety
Labeling in line with EN 50419 for disposal of electrical and electronic equipment after
the product has come to the end of its service life.
For more information, see the product user manual, chapter "Disposal".
1.3 Warning messages in the documentation
A warning message points out a risk or danger that you need to be aware of. The
signal word indicates the severity of the safety hazard and how likely it will occur
if you do not follow the safety precautions.
WARNING
Potentially hazardous situation. Could result in death or serious injury if not avoided.
8Getting Started 1424.7070.02 ─ 09
R&S®NRX
CAUTION
Potentially hazardous situation. Could result in minor or moderate injury if not
avoided.
NOTICE
Potential risks of damage. Could result in damage to the supported product or to
other property.
Safety and regulatory information
Korea certification class B
1.4 Korea certification class B
이 기기는 가정용(B급) 전자파 적합기기로서 주로 가정에서 사용하는 것을 목적으
로 하며, 모든 지역에서 사용할 수 있습니다.
9Getting Started 1424.7070.02 ─ 09
R&S®NRX
Documentation overview
Printed safety instructions
2 Documentation overview
This section provides an overview of the R&S NRX user documentation. Unless
specified otherwise, you find the documents on the R&S NRX product page at:
www.rohde-schwarz.com/manual/NRX
2.1 Getting started manual
Introduces the R&S NRX and describes how to set up and start working with the
product. A printed version is delivered with the instrument.
2.2 User manual
Contains the description of all instrument modes and functions. It also provides
an introduction to remote control, a complete description of the remote control
commands with programming examples, and information on maintenance, instrument interfaces and error messages. Includes the contents of the getting started
manual .
The user manual is provided on the R&S NRX for download under:
[System] > "Instrument Info" > "Help & Copyrights"
2.3 Instrument security procedures
Deals with security issues when working with the R&S NRX in secure areas. It is
available for download on the Internet.
2.4 Printed safety instructions
Provides safety information in many languages. The printed document is delivered with the product.
10Getting Started 1424.7070.02 ─ 09
R&S®NRX
Release notes and open source acknowledgment (OSA)
Documentation overview
2.5 Data sheets and brochures
The data sheet contains the technical specifications of the R&S NRX. It also lists
the firmware applications and their order numbers, and optional accessories.
The brochure provides an overview of the instrument and deals with the specific
characteristics.
See www.rohde-schwarz.com/brochure-datasheet/NRX
2.6 Release notes and open source acknowledgment (OSA)
The release notes list new features, improvements and known issues of the current firmware version.
The open source acknowledgment and the license texts of open source software
packages used in the R&S NRX software are provided under:
[System] > "Instrument Info" > "Help & Copyrights"
See www.rohde-schwarz.com/firmware/NRX
11Getting Started 1424.7070.02 ─ 09
Loading...