ROHDE & SCHWARZ NGU K103 Instructions
®
R&S
NGU
Source Measure Units
Getting Started
(;ÝHÛ2)
1179247702
Version 02
This manual describes the following R&S®NGU models with firmware version
1.00 and higher:
●
R&S®NGU201 2-QUADRANT SMU (3639.3763.02)
●
R&S®NGU401 4-QUADRANT SMU (3639.3763.03)
© 2020 Rohde & Schwarz GmbH & Co. KG
Mühldorfstr. 15, 81671 München, Germany
Phone: +49 89 41 29 - 0
Email: info@rohde-schwarz.com
Internet: www.rohde-schwarz.com
Subject to change – data without tolerance limits is not binding.
R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
1179.2477.02 | Version 02 | R&S®NGU
Throughout this manual, products from Rohde & Schwarz are indicated without the ® symbol, e.g.
R&S®NGU are indicated as R&S NGU.
1
Risk of injury and instrument damage
The instrument must be used in an appropriate manner to prevent electric shock, fire,
personal injury or instrument damage.
● Do not open the instrument casing.
● Read and observe the "Basic Safety Instructions" delivered as printed brochure with
the instrument.
● Read and observe the safety instructions in the following sections.
Note that the data sheet may specify additional operating conditions.
● Keep the "Basic Safety Instructions" and the product documentation in a safe place
and pass them on to the subsequent users.
Riesgo de lesiones y daños en el instrumento
El instrumento se debe usar de manera adecuada para prevenir descargas eléctricas,
incendios, lesiones o daños materiales.
● No abrir la carcasa del instrumento.
● Lea y cumpla las "Instrucciones de seguridad elementales" suministradas con el
instrumento como folleto impreso.
● Lea y cumpla las instrucciones de seguridad incluidas en las siguientes secciones.
Se debe tener en cuenta que las especificaciones técnicas pueden contener
condiciones adicionales para su uso.
● Guarde bien las instrucciones de seguridad elementales, así como la
documentación del producto, y entréguelas a usuarios posteriores.
Safety Instructions
Instrucciones de seguridad
Sicherheitshinweise
Consignes de sécurité
1171.1307.52 - 05
2
Gefahr von Verletzungen und Schäden am Gerät
Betreiben Sie das Gerät immer ordnungsgemäß, um elektrischen Schlag, Brand,
Verletzungen von Personen oder Geräteschäden zu verhindern.
● Öffnen Sie das Gerätegehäuse nicht.
● Lesen und beachten Sie die "Grundlegenden Sicherheitshinweise", die als
gedruckte Broschüre dem Gerät beiliegen.
● Lesen und beachten Sie die Sicherheitshinweise in den folgenden Abschnitten;
möglicherweise enthält das Datenblatt weitere Hinweise zu speziellen
Betriebsbedingungen.
● Bewahren Sie die "Grundlegenden Sicherheitshinweise" und die
Produktdokumentation gut auf und geben Sie diese an weitere Benutzer des
Produkts weiter.
Risque de blessures et d'endommagement de l'appareil
L'appareil doit être utilisé conformément aux prescriptions afin d'éviter les
électrocutions, incendies, dommages corporels et matériels.
● N'ouvrez pas le boîtier de l'appareil.
● Lisez et respectez les "consignes de sécurité fondamentales" fournies avec
l’appareil sous forme de brochure imprimée.
● Lisez et respectez les instructions de sécurité dans les sections suivantes. Il ne faut
pas oublier que la fiche technique peut indiquer des conditions d’exploitation
supplémentaires.
● Gardez les consignes de sécurité fondamentales et la documentation produit dans
un lieu sûr et transmettez ces documents aux autres utilisateurs.
1171.1307.52 - 05
이 기기는 업무용(A급) 전자파
적합기기로서 판매자 또는
사용자는 이 점을 주의하시기
바라며, 가정외의 지역에서
사용하는 것을 목적으로 합니다.
1171.0200.78-01
R&S®NGU
Contents
1 Documentation Overview......................................................5
1.1 Manuals..................................................................................................5
1.2 Data Sheet............................................................................................. 6
1.3 Release Notes, Open Source Acknowledgment................................ 6
2 Welcome to R&S NGU........................................................... 7
3 Putting into Operation...........................................................8
3.1 Safety................................................................................................... 10
3.2 Intended Operation............................................................................. 11
Contents
3.3 Unpacking and Checking the Instrument......................................... 12
3.4 Setting Up the Instrument.................................................................. 14
3.4.1 Bench Operation................................................................................... 14
3.4.2 Rack Mounting...................................................................................... 14
4 Instrument Tour................................................................... 15
4.1 Overview of Controls..........................................................................15
4.1.1 Front Panel........................................................................................... 15
4.1.2 Rear Panel............................................................................................ 17
4.2 Switching On the Instrument............................................................. 20
5 Trying Out the Instrument...................................................22
5.1 Setting the Output Voltage and Current............................................22
5.2 Activating the Channel Output.......................................................... 22
6 Maintenance and Support...................................................24
3Getting Started 1179.2477.02 ─ 02
R&S®NGU
6.1 Maintenance........................................................................................ 24
6.2 Contacting Customer Support...........................................................24
Contents
Index..................................................................................... 26
4Getting Started 1179.2477.02 ─ 02
R&S®NGU
Documentation Overview
Manuals
1 Documentation Overview
This section provides an overview of the R&S NGU user documentation.
1.1 Manuals
You find the documents on the R&S NGU product page at:
www.rohde-schwarz.com/manual/ngu
Getting Started
Introduces the R&S NGU source measure units and describes how to set up and
start working with the instrument. The printed document is delivered with the
instrument.
User manual
Contains the description of all instrument modes and functions. It also provides
an introduction to remote control, a complete description of the remote control
commands with programming examples, and information on maintenance and
instrument interfaces. Includes the contents of the getting started manual.
The online version of the user manual provides the complete contents for immediate display on the internet.
Basic safety instructions
Contains safety instructions, operating conditions and further important information. The printed document is delivered with the instrument.
Service manual
Describes the performance test for checking the rated specifications, module
replacement and repair, firmware update, troubleshooting and fault elimination,
and contains mechanical drawings and spare part lists. The service manual is
available for registered users on the global Rohde & Schwarz information system
(GLORIS, https://gloris.rohde-schwarz.com).
5Getting Started 1179.2477.02 ─ 02
R&S®NGU
Release Notes, Open Source Acknowledgment
Documentation Overview
1.2 Data Sheet
The datasheet contains the technical specifications of the R&S NGU source measure units. It also lists all options with their order numbers and accessories.
See www.rohde-schwarz.com/brochure-datasheet/ngu
1.3 Release Notes, Open Source Acknowledgment
The release notes list new features, improvements and known issues of the current firmware version, and describe the firmware installation. The open source
acknowledgment document provides verbatim license texts of the used open
source software. It can also be read directly on the instrument.
See www.rohde-schwarz.com/firmware/ngu.
6Getting Started 1179.2477.02 ─ 02
Loading...