Rohde and Schwarz FSQ8 Spec Sheet

Signal Analyzer ¸FSQ

Specifi cations

Version

05.00

April

2005

Specifi cations

Contents

SPECIFICATIONS......................................................................................................................................................................................3

FREQUENCY.............................................................................................................................................................................................3

SWEEP ....................................................................................................................................................................................................3

RESOLUTION BANDWIDTHS .......................................................................................................................................................................4

LEVEL ......................................................................................................................................................................................................5

I/Q DATA ..................................................................................................................................................................................................8

AUDIO DEMODULATION .............................................................................................................................................................................9

TRIGGER FUNCTIONS ................................................................................................................................................................................9

INPUTS AND OUTPUTS (FRONT PANEL) .......................................................................................................................................................9

INPUTS AND OUTPUTS (REAR PANEL) .......................................................................................................................................................10

GENERAL SPECIFICATIONS......................................................................................................................................................................11

TRACKING GENERATOR R&S FSU-B9, ATTENUATOR R&S FSU-B12 FOR TRACKING GENERATOR ..........................................................12

Inputs and outputs (front panel) .......................................................................................................................................................13

RF PREAMPLIFIER R&S FSQ-B23 (FOR R&S FSQ26 ONLY, REQUIRES OPTION R&S FSU-B25) .............................................................14

ELECTRONIC ATTENUATOR R&S FSU-B25 .............................................................................................................................................15

I/Q BASEBAND INPUTS R&S FSQ-B71....................................................................................................................................................16

Frequency ........................................................................................................................................................................................16

Spectral purity ..................................................................................................................................................................................16

Amplitude .........................................................................................................................................................................................16

Dynamic range.................................................................................................................................................................................17

Phase...............................................................................................................................................................................................17

Input ports ........................................................................................................................................................................................17

I/Q BANDWIDTH EXTENSION R&S FSQ-B72 ...........................................................................................................................................18

Frequency ........................................................................................................................................................................................18

Level ................................................................................................................................................................................................18

Dynamic ...........................................................................................................................................................................................19

General data ....................................................................................................................................................................................19

ORDERING INFORMATION ....................................................................................................................................................................20

OPTIONS................................................................................................................................................................................................20

RECOMMENDED EXTRAS .........................................................................................................................................................................21

2 Signal Analyzer R&S FSQ Version 05.00, April 2005

Specifications

Specifications are valid under the following conditions:
30 minutes warm-up time at ambient temperature, specified environmental conditions met, calibration cycle adhered to, and total
calibration performed. Data without tolerances: typical values only. Data designated 'nominal' applies to design parameters and is
not tested.

Frequency

Frequency range

R&S FSQ3: DC coupled 20 Hz to 3.6 GHz

AC coupled 1 MHz to 3.6 GHz
R&S FSQ8: DC coupled 20 Hz to 8 GHz
AC coupled 1 MHz to 8 GHz
R&S FSQ26: DC coupled 20 Hz to 26.5 GHz
AC coupled 10 MHz to 26.5 GHz
R&S FSQ40: DC coupled 20 Hz to 40 GHz

Frequency resolution

0.01 Hz

Reference frequency, internal, nominal standard OCXO

Aging per day after 30 days of continuous operation 1 × 10
Aging per year after 30 days of continuous operation 1 × 10

–9

–7

Temperature drift +5 °C to +45 °C 8 × 10–8
Total error per year 1.8 × 10–7

Reference frequency, internal, nominal Option R&S FSU-B4

Aging per day after 30 days of continuous operation 2 × 10
Aging per year after 30 days of continuous operation 3 × 10

–10

–8

Temperature drift +5 °C to +45 °C 1 × 10–9
Total error per year 5 × 10–8

External reference frequency

1 MHz to 20 MHz, 1 Hz steps

Frequency display

with marker or frequency counter

Marker resolution span/624
Maximum deviation sweep time >3 × auto sweep time ±(marker frequency × reference error +

0.5% × span +10% × resolution bandwidth
+ ½ (last digit))

Frequency counter resolution selectable 0.1 Hz to 10 kHz
Count accuracy S/N >25 dB ±(frequency × reference error +

½ (last digit))
Display range for frequency axis 0 Hz, 10 Hz to max. frequency
Resolution 0.1 Hz
Max. span deviation 1%

Spectral purity, SSB phase noise (1Hz)

f = 640 MHz

Residual FM nominal, RBW 10 kHz, RMS <1 Hz
Carrier offset 10 Hz - 73 dBc, nominal
10 Hz with option R&S FSU-B4 fitted - 86 dBc, nominal

100 Hz

1 kHz

10 kHz

100 kHz

1 MHz

<-98 dBc1,<-90 dBc, typ. -104 dBc

<-116 dBc

<-128 dBc

<-128 dBc

<-140 dBc

1

, <-112dBc, typ. -124 dBc1

1

, <-120 dBc, typ. -133 dBc1

1

, <-120 dBc, typ. -133 dBc1

1

, <-138 dBc, typ. -146 dBc1

1

10 MHz typ. -160 dBc

Sweep

Sweep time time sweep, span = 0 Hz

frequency sweep, span ≥10 Hz 2.5 ms to 16000 s in steps ≤10%

1 µs to 16000 s in 5% steps

Max. deviation of sweep time 3%

Measurement in time domain

1

valid as of serial number 200000

with marker and cursor lines

(resolution 31.25 ns)

Version 05.00 x April 2005 Signal Analyzer R&S FSQ 3

0

-20

-40

-60

SSB phase noise (dBc(1Hz))

-80

-100

-120

-140

-160

-180
10 Hz 100 Hz 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz

Resolution bandwidths

R&S FSQ center frequency 200 MHz

R&S FSQ center frequency 1 GHz

R&S FSQ center frequency 5 GHz

R&S FSQ center frequency 25 GHz

Sweep filters

3 dB bandwidths

Bandwidth uncertainty
10 Hz to 100 kHz (digital) <3%
200 kHz to 5 MHz (analog) <10%
10 MHz –30% to +10%
20 MHz –20% to +20%

Shape factor 60 dB:3 dB

200 kHz to 2 MHz <12
3 MHz to 10 MHz <7
20 MHz, 50 MHz <6, nominal

FFT filters

3 dB bandwidths 1 Hz to 30 kHz in 1/2/3/5 sequence
Bandwidth uncertainty 5%, nominal
Shape factor 60 dB:3 dB <3, nominal

EMI filters

6 dB bandwidths 200 Hz, 9 kHz, 120 kHz
Bandwidth uncertainty 3%, nominal
Shape factor 60 dB:3 dB <6, nominal

50 MHz, f ≤ 3.6 GHz
50 MHz, f > 3.6 GHz

≤100 kHz

10 Hz to 20 MHz in 1/2/3/5 sequence,
50 MHz

–20% to +20%
–30% to +100%

<6

4 Signal Analyzer R&S FSQ Version 05.00, April 2005

Channel filters

Bandwidths 100, 200, 300, 500 Hz,

Shape factor 60 dB:3 dB <2, nominal
Bandwidth uncertainty 2%, nominal

Video bandwidths

1 Hz to 10 MHz in 1/2/3/5 sequence

1, 1.5, 2, 2.4, 2.7, 3, 3.4, 4, 4.5, 5, 6, 8.5,
9, 10, 12.5, 14, 15, 16, 18 (RRC), 20, 21,

24.3 (RRC), 25, 30, 50, 100, 150, 192,
200, 300, 500 kHz,
1, 1.2288, 1.28 (RRC), 1.5, 2, 3, 3.84
(RRC), 4.096 (RRC), 5 MHz

Level

Display range displayed noise floor to +30 dBm

Maximum input level
DC voltage RF input AC coupled

CW RF power RF attenuation 0 dB

Pulse spectral density
Max. pulse voltage
Max. pulse energy

Intermodulation

1 dB compression of input mixer 0 dB RF attenuation

Third-order intercept point (TOI)

Second harmonic intercept (SHI) f < 100 MHz

RF input DC coupled

RF attenuation ≥10 dB

RF attenuation ≥10 dB
RF attenuation ≥10 dB, 10 µs

≤3.6 GHz
>3.6 GHz
R&S FSQ8
R&S FSQ26, R&S FSQ40

level 2 × –10 dBm, ∆f > 5 × RBW
or 10 kHz, whichever is larger
R&S FSQ3:

10 MHz ≤ f < 300 MHz
300 MHz ≤ f ≤ 3.6 GHz

R&S FSQ8:

10 MHz ≤ f < 300 MHz
300 MHz ≤ f ≤ 3.6 GHz

3.6 GHz ≤ f ≤ 8 GHz

R&S FSQ26:

10 MHz ≤ f < 300 MHz
300 MHz ≤ f < 3.6 GHz

3.6 GHz ≤ f < 26.5 GHz

R&S FSQ40:

10 MHz ≤ f < 300 MHz
300 MHz ≤ f < 3.6 GHz

26.5 GHz ≤ f ≤ 40 GHz

100 MHz < f ≤ 400 MHz
400 MHz < f ≤ 500 MHz
500 MHz < f ≤ 1 GHz
1 GHz < f ≤ 1.8 GHz
>1.8 GHz

50 V
0 V

20 dBm (= 0.1 W)
30 dBm (= 1 W)

97 dBµV/MHz
150 V
1 mWs

+13 dBm, nominal

+10 dBm, nominal
+7 dBm, nominal

>17 dBm, typ. 20 dBm
>19 dBm, typ. 25 dBm

>17 dBm, typ. 20 dBm
>20 dBm, typ. 25 dBm
>19 dBm, typ. 23 dBm

>17 dBm, typ. 20 dBm
>22 dBm, typ. 27 dBm
>12 dBm, typ. 15 dBm

>17 dBm, typ. 20 dBm
>20 dBm, typ. 25 dBm
>12 dBm, typ. 15 dBm

>35 dBm
>45 dBm, typ. 55 dBm
>52 dBm, typ. 60 dBm
>45 dBm, typ. 55 dBm
>35 dBm
80 dBm, nominal

Version 05.00 x April 2005 Signal Analyzer R&S FSQ 5

Displayed average noise level

0 dB RF attenuation, termination 50 Ω

R&S FSQ3

R&S FSQ8

R&S FSQ26

R&S FSQ40
20 MHz ≤ f < 2 GHz

Maximum dynamic range

1 dB compression to DANL (1 Hz) 170 dB

Immunity to interference

Image frequency f ≤ 3.6 GHz

Intermediate frequency f ≤ 3.6 GHz

Spurious response f > 1 MHz, without input signal,

Other interfering signals ∆f > 100 kHz

RBW = 1 kHz, VBW = 3 kHz, zero span,
sweep time 50 ms, trace average, sweep
count = 20, mean marker,
normalized to 10 Hz RBW

20 Hz
100 Hz
1 kHz
10 kHz
100 kHz
1 MHz
10 MHz

20 MHz ≤ f < 2.0 GHz

2.0 GHz ≤ f ≤ 3.0 GHz

3.0 GHz ≤ f ≤ 3.6 GHz

20 MHz ≤ f < 2.0 GHz
2 GHz ≤ f ≤ 3.0 GHz
3 GHz ≤ f ≤ 3.6 GHz

3.6 GHz ≤ f < 7 GHz
7 GHz ≤ f < 8 GHz

20 MHz ≤ f < 2 GHz
2 GHz ≤ f < 3.6 GHz

3.6 GHz ≤ f < 8 GHz
8 GHz ≤ f < 13 GHz
13 GHz ≤ f < 18 GHz
18 GHz ≤ f < 22 GHz
22 GHz ≤ f < 26.5 GHz

2 GHz ≤ f < 8 GHz
8 GHz ≤ f < 18 GHz
18 GHz ≤ f < 22 GHz
22 GHz ≤ f < 26.5 GHz

26.5 GHz ≤ f < 40 GHz

f > 3.6 GHz

3.6 GHz < f ≤ 4.2 GHz
f > 4.2 GHz

0 dB RF attenuation

mixer level <–10 dBm, f ≤ 2.3 GHz
mixer level <–35 dBm, 2.3 GHz<f < 4 GHz
mixer level <–10 dBm
4 GHz ≤ f < 8 GHz
8 GHz ≤ f < 16 GHz
16 GHz ≤ f < 26 GHz

26.5 GHz ≤ f < 40 GHz

<–80 dBm
<–100 dBm
<–110 dBm
<–120 dBm
<–126 dBm
<–136 dBm
<–143 dBm

<–145 dBm, typ. –148 dBm
<–143 dBm, typ. –147 dBm
<–142 dBm, typ. –147 dBm

<–145 dBm, typ. –148 dBm
<–143 dBm, typ. –147 dBm
<–142 dBm, typ. –146 dBm
<–140 dBm, typ. –142 dBm
<–139 dBm, typ. –142 dBm

<–142 dBm, typ. –146 dBm
<–140 dBm, typ. –143 dBm
<–141 dBm, typ. –145 dBm
<–139 dBm, typ. –143 dBm
<–137 dBm, typ. –141 dBm
<–135 dBm, typ. –138 dBm
<–133 dBm, typ. –136 dBm

<–142 dBm, typ. –146 dBm
<–140 dBm, typ. –143 dBm
<–138 dBm, typ. –141 dBm
<–135 dBm, typ. –138 dBm
<–133 dBm, typ. –136 dBm
<–125 dBm, typ. –128 dBm

>90 dB, typ. >110 dB
>70 dB, typ. >100 dB
>90 dB, typ. >110 dB
typ. 70 dB
>70 dB, typ. >90 dB
<–103 dBm

<–80 dBc
<–70 dBc

<–70 dBc
<–64 dBc
<–58 dBc
<–52 dBc

6 Signal Analyzer R&S FSQ Version 05.00, April 2005

Level display

Screen 625 × 500 pixel (one diagram), max. 2

Logarithmic level axis 1 dB to 200 dB, in steps of 1/2/5
Linear level axis 10% of reference level per level division,

Number of traces 1 measurement diagram

2 measurement diagrams

Trace detector Max Peak, Min Peak, Auto Peak (Normal),

Number of measurement points default value

range

Trace functions Clear/Write, Max Hold, Min Hold, Average
Trace update rate local measurement, display update rate,

Setting range of reference level logarithmic level display –130 dBm to (+5 dBm + RF attenuation),

Units of level axis logarithmic level display

Level measurement uncertainty

Absolute level uncertainty at 128 MHz RBW = 10 kHz, level –30 dBm,

Frequency response
referenced to 128 MHz

Attenuator switching uncertainty f = 128 MHz

Uncertainty of reference level setting RF attenuation 10 dB, referenced

Display non linearity

Logarithmic level display RBW ≤ 100 kHz or channel filters,

200 kHz ≤ RBW ≤10 MHz, S/N >16 dB

Linear level display 5% of reference level
Bandwidth switching error referenced to RBW = 10 kHz

625 points, zero span
remote measurement, display off:
zero span/sweep time 1 ms
span = 10 MHz, sweep time 2.5 ms

linear level display 7.0 nV to 7.07 V in steps of 1%

linear level display

reference level –30 dBm,
RF attenuation 10 dB

DC coupling, RF attenuation ≥10 dB,
+20 °C to +30 °C
10 MHz ≤ f < 3.6 GHz

3.6 GHz ≤ f < 8 GHz, span < 1 GHz
8 GHz ≤ f < 22 GHz, span < 1 GHz
22 GHz ≤ f < 26.5 GHz, span < 1 GHz

26.5 GHz ≤ f < 40 GHz, span < 1 GHz
f ≥ 3.6 GHz, span ≥ 1 GHz

+5 °C to +45 °C
10 MHz ≤ f < 3.6 GHz

3.6 GHz ≤ f < 26.5 GHz
f ≥ 26.5 GHz

0 dB to 70 dB, referenced to 10 dB
attenuation

to –10 dBm reference level setting

+20 °C to +30 °C, mixer level ≤–10 dBm)

S/N >20 dB
0 dB to –70 dB
–70 dB to –90 dB

0 dB to –50 dB
–50 dB to –70 dB
RBW >10 MHz, S/N >16 dB
0 dB to –50 dB

1 Hz to 100 kHz
200 kHz to 3 MHz
5 MHz to 50 MHz
FFT filter 1 Hz to 3 kHz

diagrams with independent settings

10 divisions or logarithmic scaling
3
6

Sample, RMS, Average, Quasi Peak
625
155 to 10001 in steps of about a

factor of 2

80 per second

70 per second
50 per second

max. 30 dBm, in steps of 0.1 dB

dBm, dBµV, dBmV, dBµA, dBpW
µV, mV, µA, mA, pW, nW

<0.2 dB (σ = 0.07 dB)

<0.3 dB (σ = 0.1 dB)
<1.5 dB (σ = 0.5 dB)
<2 dB (σ = 0.7 dB)
<2.5 dB (σ = 0.8 dB)
<2.5 dB (σ = 0.8 dB)
add 0.5 dB to above values

<0.6 dB (σ = 0.2 dB)
add 0.5 dB to above values
add 1.0 dB to above values
<0.2 dB (σ = 0.07 dB)

<0.15 dB (σ = 0.05 dB)

<0.1 dB (σ = 0.03 dB)
<0.3 dB (σ =0.1 dB)

<0.2 dB (σ =0.07 dB)
<0.5 dB (σ =0.17 dB)

<0.5 dB (σ =0.17 dB)

<0.1 dB (σ =0.03 dB)
<0.2 dB (σ =0.07 dB)
<0.5 dB (σ =0.15 dB)
<0.2 dB (σ =0.07 dB)

Version 05.00 x April 2005 Signal Analyzer R&S FSQ 7

Total measurement uncertainty

0 dB to –70 dB, S/N >20 dB,
span/RBW <100, 95% confidence level,
20 °C to 30 °C, mixer level ≤–10 dBm
f < 3.6 GHz, RBW ≤100 kHz
f < 3.6 GHz, RBW >100 kHz

3.6 GHz ≤ f < 8 GHz
8 GHz ≤ f < 18 GHz
18 GHz ≤ f < 26.5 GHz

26.5 GHz ≤ f < 40 GHz

0.3 dB

0.5 dB

2.0 dB

2.5 dB

3.0 dB

3.0 dB

I/Q data

General

Interface GPIB or LAN interface
Sampling rate Programmable: 10 kHz to 81.6 MHz

ADC resolution 14 bit
I/Q memory 16 Msamples each for I and Q data

RF path

Max. information bandwidth 28 MHz
Harmonic distortion full-scale input signal typ.<–70 dBc
Third order distortion two input tones 6 dB below full scale typ.<–80 dBc
LO feedthrough f

= 81.6 MHz – f

I/Q

center

;

mixer level = –10 dBm

Aliased DC offset f

= 20.4 MHz; within ±10 K temperature

I/Q

change after I/Q or total calibration

Frequency response

within 2/3 RBW;
RBW = 3, 5, 10, 20, 50 MHz

f ≤ 3.6 GHz typ.0.3 dB
f > 3.6 GHz, YIG filter off typ.0.5 dB

Deviation from linear phase

within 2/3 RBW;
RBW = 3, 5, 10, 20, 50 MHz

f ≤ 3.6 GHz typ.1°
f > 3.6 GHz, YIG filter off typ.2°

in 0.1 Hz steps

typ.<–65 dBfs

typ.<–65 dBfs

8 Signal Analyzer R&S FSQ Version 05.00, April 2005

Audio demodulation

AF demodulation types AM and FM
Audio output loudspeaker and phone jack
Marker stop time in spectrum mode 100 ms to 60 s

Trigger functions

Trigger
Trigger source free run, video, external, IF level

Trigger offset

span = 0 Hz ± (125 ns to 100 s), resolution 125 ns min.,

Max. deviation of trigger offset ± (31.25 ns + (0.1% × trigger offset))
Gated sweep
Gate source external, IF level, video
Gate delay
Gate length 125 ns to 100 s, resolution min. 125 ns or

Max. deviation of gate length

span ≥10 Hz

(mixer level 10 dBm to –50 dBm)
125 ns to 100 s, resolution 125 ns min.

(or 1% of offset)

dependent on sweep time

1 µs to 100 s

1% of gate length
±(31.25 ns + (0.05% × gate length))

Inputs and outputs (front panel)

RF input

Impedance
Connector R&S FSQ3, R&S FSQ8

R&S FSQ26

R&S FSQ40

VSWR RF attenuation ≥10 dB, DC coupled

f < 3.6 GHz
R&S FSQ8:

3.6 GHz ≤ f < 8 GHz
R&S FSQ26, R&S FSQ40:

3.6 GHz ≤ f < 18 GHz
18 GHz ≤ f < 26.5 GHz

26.5 GHz ≤ f < 40 GHz

RF attenuation <10 dB or AC coupling typ. 1.5
Setting range of attenuator 0 dB to 75 dB, in 5 dB steps

Probe power supply

Supply voltages +15 V DC, –12.6 V DC and ground,

Power supply for antennas etc

Supply voltages

Keyboard connector

AF output

Connector
Output impedance
Open-circuit voltage

Power supply for noise source

Output voltage

PS/2 female for MF-2 keyboard

BNC female

50 Ω
N female,

testport adapter
APC 3.5 mm/N female,
testport adapter

2.92 mm (K)/N female

<1.5

<2

<1.8
<2.0
<2.5

max. 150 mA, nominal

5-pin connector
± 10 V and ground, max. 100 mA, nominal

3.5 mm mini jack
10 Ω
up to 1.5 V, adjustable

0 V and 28 V, switchable, nominal

Version 05.00 x April 2005 Signal Analyzer R&S FSQ 9

Inputs and outputs (rear panel)

IF 20.4 MHz

Impedance 50 Ω
Bandwidth RBW ≤30 kHz 1.67 × resolution bandwidth, min. 2.6 kHz
RBW = 50 kHz, 100 kHz 400 kHz
200 kHz ≤ RBW ≤ 10 MHz equal to resolution bandwidth
Level RBW ≤ 100 kHz, FFT filter,

RBW = 200 kHz to 10 MHz,

IF 404.4 MHz

Impedance 50 Ω
Bandwidth RBW >10 MHz equal to resolution bandwidth
Level mixer level ≤0 dBm mixer level typ. –10 dB

Video output

Impedance 50 Ω
Output voltage RBW ≥200 kHz, logarithmic scaling,

Reference output

Impedance 50 Ω
Output frequency 10 MHz
Level >0 dBm, nominal

Reference Input

Impedance 50 Ω
Input frequency range 1 MHz ≤ fin ≤ 20 MHz, in 1 Hz steps
Required level >0 dBm from 50 Ω

Sweep output

Output voltage

External trigger/gate input

Trigger voltage 1.4 V (TTL)
Input impedance ≥10 kΩ

IEC/IEEE bus control

Command set SCPI 1997.0 or HP8566 compatible
Connector 24-pin Amphenol female
Interface functions

LAN interface

USB interface

Serial interface

Printer interface

Mouse interface

Connector for external monitor (VGA)

mixer level >–70 dBm

mixer level >–50 dBm

active only if RBW >10 MHz

full scale

BNC female

–20 dBm at reference level

0 dBm at reference level

BNC female

BNC female

0 V to 1 V (EMF)

BNC female

BNC female

BNC female

0 V to 5 V, proportional to displayed
frequency

BNC female

interface to IEC 625-2 (IEEE 488.2)

SH1, AH1, T6, L4, SR1, RL1, PP1,
DC1,DT1, C0

10/100 BaseT, RJ45

type A plug, version 1.1

RS-232-C (COM), 9-pin female
connectors

parallel (Centronics compatible)

PS/2 compatible

15-pin sub-D

10 Signal Analyzer R&S FSQ Version 05.00, April 2005

General specifications

Display

Resolution 800 × 600 pixel (SVGA resolution)
Pixel failure rate <1 × 10–5

Mass memory

Mass memory 1.44 Mbyte 3 ½" disk drive, hard disk,

Data storage

Temperature

Temperature operating temperature range

Climatic loading +40 °C at 95% relative humidity

Mechanical resistance

sinusoidal vibration 5 Hz to 150 Hz, max. 2 g at 55 Hz;

random vibration 10 Hz to 100 Hz, acceleration 1 g (rms)
shock 40 g shock spectrum,

Recommended calibration interval operation with external reference

RFI suppression meets EMC directive of EU (89/336/EEC)

Power supply

AC supply 100 V to 240 V, 3.1 A to 1.3 A; 50 Hz to

Power consumption R&S FSQ3, R&S FSQ8

Safety meets EN 61010-1, UL 3111-1,

Test mark VDE, GS, CSA, CSA-NRTL
Dimensions W × H × D in mm 435 × 192 × 460
Weight R&S FSQ3

21 cm LC TFT colour display (8.4")

permissible temperature range
storage temperature range

operation with internal reference

R&S FSQ26, R&S FSQ40

R&S FSQ8
R&S FSQ26
R&S FSQ40

USB flash disk (not supplied)
>500 instrument settings and traces

+5° C to +40 °C
+0° C to +50 °C
–40°C to +70 °C

(DIN EN 60068-2-30: 2000-02)

0.5 g from 55 Hz to 150 Hz;
meets DIN EN 60068-2-6: 1996-05,
DIN EN 60068-2-30: 2000-02,
DIN EN 61010-1, MIL-T-28800D, class 5

meets MIL-STD-810C and MIL-T-28800D,
classes 3 and 5

2 years
1 year

and German EMC legislation

400 Hz, class of protection I to VDE 411
typ. 130 VA
typ. 150 VA

CSA C22.2 No. 1010-1, IEC 1010-1

14.6 kg

15.4 kg

16.5 kg

16.8 kg

Version 05.00 x April 2005 Signal Analyzer R&S FSQ 11

Tracking Generator R&S FSU-B9,
Attenuator R&S FSU-B12 for Tracking Generator

Unless specified otherwise, specifications not valid for frequency range from –3 × RBW to +3 × RBW, however at least not valid from
–100 kHz to +100 kHz. Maximum output level +5 dBm (peak modulation in the case of amplitude-modulated signals).

Frequency

Frequency range 100 kHz to 3.6 GHz
Resolution 1 Hz

Frequency offset

Setting range
Resolution 1 Hz

Spectral purity

SSB phase noise f = 500 MHz, carrier offset 10 kHz

normal mode
with frequency offset
with FM modulation on

Level

Level setting range

with option R&S FSU-B12

Max. deviation of output level

Absolute f = 128 MHz,

output level –20 dBm to 0 dBm

Frequency response referenced to level at 128 MHz,

sweep time >100 ms, +5 °C to +45 °C

output level –20 dBm to 0 dBm,

100 kHz to 3.6 GHz
output level –30 dBm to –20 dBm,
f = 100 kHz to 3.6 GHz
additional deviation with R&S FSU-B12,
100 kHz to 3.6 GHz

Dynamic range

Attenuation measurement range RBW = 1 kHz, f > 10 MHz 100 dB
Harmonics
Spurious, nonharmonics

output level –10 dBm
output level 0 dBm

Modulation

Modulation format external I/Q, AM, FM
Input Voltage full scale

AM, FM, V

pp

I/Q

f

> f

AM

Center

, span = 0 Hz

Mod

Modulation depth 0% to 99%
Modulation frequency response 0 Hz to 5 MHz

0 Hz to 30 MHz

> f

FM

f

Center

, span = 0 Hz

Mod

Frequency deviation full range: 100 Hz, 1 kHz, 10 kHz,

Modulation frequency range deviation = 10 MHz

deviation ≤1 MHz

Modulation frequency response 0 kHz to 100 kHz 1 dB

> f

I/Q modulation

f

Center

, span = 0 Hz

Mod

Modulation frequency response 0 Hz to 5 MHz

0 Hz to 30 MHz

±200 MHz

typ. –120 dBc (1 Hz)
typ. –110 dBc (1 Hz)
typ. –110 dBc (1 Hz)

–30 dBm to +5 dBm in steps of 0.1 dB
–100 dBm to +5 dBm in steps of 0.1 dB

<1 dB (σ = 0.34 dB)

<3 dB, typ. 1.9 dB

3 dB

<1 dB

typ. –30 dBc
typ. –30 dBc

1 V

22

=+

UU

0.5 V

qi

1 dB
3 dB

100 kHz, 1 MHz
0 Hz to 1 kHz
0 Hz to 100 kHz

1 dB
3 dB

12 Signal Analyzer R&S FSQ Version 05.00, April 2005

Modulation deviation of tracking
generator

EVM NADC/TETRA/PDC

PHS

Phase error GSM/DCS1800/PCS1900

Rho factor IS-95 CDMA 0.997

Inputs and outputs (front panel)

RF output

VSWR

Inputs and outputs (rear panel)

TG I/AM IN BNC female

Impedance

Input voltage Vpp 1 V

TG Q/FM IN BNC female

Impedance

Input voltage Vpp 1 V

I/Q modulation, typical values, baseband
signals generated by the R&S AMIQ

RMS 2%

peak 4%

RMS 2%

peak 5%

RMS 1.5°

peak 5°

100 kHz ≤ f ≤ 2 GHz
2 GHz ≤ f ≤ 3.6 GHz

N female, 50 Ω

1.2

1.5

50 Ω

50 Ω,

LO/IF Ports for External Mixers R&S FSU-B21
(for R&S FSQ26 and R&S FSQ40 only)

LO signal

Frequency range 7.0 GHz to 15.5 GHz
Level +20 °C to +30 °C

+5 °C to +45 °C

IF input

IF frequency 404.4 MHz
Full scale level 2-port mixer (LO output / IF input, front

panel)
3-port mixer (IF input, front panel)

Level uncertainty IF input level –30 dBm,

RBW 30 kHz,
2-port mixer, LO output / IF input (front
panel)
+20 °C to +30 °C

+5 °C to +45 °C
3-port mixer, IF input (front panel)
+20 °C to +30 °C
+5 °C to +45 °C

+15.0 dBm ±1 dB
+15.0 dBm ±3 dB

–20 dBm
–20 dBm

<1 dB
<3 dB

<1 dB
<3 dB

Inputs and outputs (front panel)

Option R&S FSU-B21

LO output/IF input SMA-female, 50 Ω
IF input SMA-female, 50 Ω

Version 05.00 x April 2005 Signal Analyzer R&S FSQ 13

RF Preamplifier R&S FSQ-B23
(for R&S FSQ26 only, requires option R&S FSU-B25)

Level measurement uncertainty

Frequency response preamplifier = on

3.6 GHz to 8 GHz
8 GHz to 22 GHz

Displayed average noise level

0 dB RF attenuation, termination 50 Ω

preamplifier = off

3.6 GHz to 8 GHz

preamplifier = on

22 GHz to 26.5 GHz

RBW = 1 kHz, VBW = 3 kHz, zero span,
sweep time 50 ms, trace average,sweep
count = 20, mean marker,
normalized to 10 Hz RBW

8 GHz to 26.5 GHz

3.6 GHz to 8 GHz <–152 dBm, typ. –155 dBm
8 GHz to 13 GHz <–149 dBm, typ. –152 dBm
13 GHz to 18 GHz <–147 dBm, typ. –150 dBm
18 GHz to 22 GHz <–144 dBm, typ. –149 dBm
22 GHz to 26.5 GHz <–140 dBm, typ. –145 dBm

<2.0 dB (σ = 0.7 dB)
<2.5 dB (σ = 0.8 dB)
<3.0 dB (σ = 1 dB)

R&S FSQ26 specifications + 2 dB
R&S FSQ26 specifications + 3 dB

14 Signal Analyzer R&S FSQ Version 05.00, April 2005

Electronic Attenuator R&S FSU-B25

Frequency

Frequency range R&S FSQ3

R&S FSQ8

R&S FSQ26

R&S FSQ40

100 kHz

100 kHz

100 kHz

100 kHz

Setting range

Electronic attenuator 0 dB to 30 dB, in 5 dB steps
Preamplifier 20 dB, switchable

Level measurement uncertainty

Frequency response with preamplifier or electronic attenuator
10 MHz to 50 MHz
50 MHz to 3.6 GHz

3.6 MHz to 8 GHz
Reference error

at 128 MHz, RBW ≤100 kHz, reference

<1 dB (σ = 0.34 dB)
<0.6 dB (σ = 0.2 dB)
<2.0 dB (σ = 0.7 dB)

level –30 dBm, RF attenuation 10 dB
electronic attenuator
preamplifier

<0.3 dB (σ = 0.1 dB)
<0.3 dB (σ = 0.1 dB)

Displayed average noise level

0 dB RF attenuation, termination 50 Ω

RBW = 1 kHz, VBW = 3 kHz, zero span,

sweep time 50 ms, trace average,

sweep count = 20, mean marker,

normalized to 10 Hz RBW
preamplifier on
R&S FSQ3, R&S FSQ8, R&S FSQ26

10 MHz to 2.0 GHz

2.0 GHz to 3.6 GHz

R&S FSQ8

3.6 GHz to 8 GHz

R&S FSQ40

10 MHz to 40 MHz
40 MHz to 2 GHz
2 GHz to 3.6 GHz

with the R&S FSU-B25 built in, the

<–152 dBm
<–150 dBm

<–147 dBm

<–150 dBm
<–152 dBm
<–150 dBm

average noise level values displayed by

the base units degrade by

(R&S FSU-B25 off):
20 Hz to 3.6 GHz 1 dB
R&S FSQ8, 3.6 GHz to 8 GHz 2 dB
preamplifier off, electronic attenuator 0 dB
20 Hz to 3.6 GHz typ. 2.5 dB
R&S FSQ8, 3.6 GHz to 8 GHz typ. 3.5 dB

Intermodulation

Third-order intercept point (TOI) electronic attenuator on,

∆f >5 × RBW or 10 kHz
10 MHz to 300 MHz >17 dBm
300 MHz to 3.6 GHz >20 dBm

3.6 GHz to 8 GHz >18 dBm

2

Valid as of R&S FSU-B25 serial number 200000.

2

, 10 MHz to 3.6 GHz

2

, 10 MHz to 8 GHz

2

, 10 MHz to 3.6 GHz

2

, 10 MHz to 3.6 GHz

Version 05.00 x April 2005 Signal Analyzer R&S FSQ 15

I/Q Baseband Inputs R&S FSQ-B71

I/Q baseband inputs for unbalanced and balanced signals. Input impedance selectable 50 Ω/1 MΩ. All data specified with 1 MΩ
input impedance setting apply to 50 Ω source impedance. Specifications are guaranteed under the following conditions:
30 minutes warm-up time at ambient temperature, specified environmental conditions met, calibration cycle adhered to, and
baseband calibration performed. Data without tolerances: typical values only. Data designated “nominal“ apply to design parameters
and are not tested.

Frequency

Sampling

ADC sampling rate 81.6 MHz
ADC resolution 14 Bit

Frequency range

Useful bandwidth with specified frequency
response

Spectral purity

Phase noise at fin = 20 MHz

Amplitude

Maximum safe input level

Input level range (full scale)

with balanced setting: differential voltage

Max. common mode input voltage

Level uncertainty

Level uncertainty at 1 MHz (full scale) <0.25 dB

I/Q imbalance at 1 MHz <0.1 dB

Frequency response

DC to 30 MHz,filter on <0.3 dB
DC to 36 MHz,filter off <0.3 dB
I/Q imbalance, DC to 30 MHz, filter on <0.15 dB
I/Q imbalance, DC to 36 MHz, filter off <0.15 dB

Frequency response

DC to 10 MHz <0.30 dB
I/Q imbalance, DC to 10 MHz <0.15 dB

Amplitude linearity

0 dB to –90 dB with dither on typ. 0.1 dB

I/Q offset

fs = output data rate

= 40.8 MHz to 81.6 MHz

f

s

> 20.4 MHz to < 40.8 MHz

f

s

= 10 kHz to 20.4 MHz

f

s

DC to 0.441 × f
DC to 0.34 × f
DC to 0.40 × f

s

s

s

1 kHz offset typ. –135 dBc/Hz

50 Ω, power from 50 Ω source

1 MΩ, peak voltage

+30 dBm (1 Watt)
±5 V

50 Ω

1 MΩ

50 Ω

1 MΩ, any range

±31.6 mV to ±5.62 V (5 dB steps)
±31.6 mV to ±1.78 V (5 dB steps)

±2 × range, max. ±5 V
–2.5 V to +3.5 V

50 Ω, f

= 81.6 MHz

s

1 MΩ

50 Ω balanced setting

50 Ω unbalanced setting

1 MΩ

<0.15 % of range ±0.2 mV
<2 mV
<2 mV

16 Signal Analyzer R&S FSQ Version 05.00, April 2005

Dynamic range

Noise level

Signal to noise ratio range = 1 V, signal level equal to range typ. 143 dBc (1 Hz)
Noise floor range = 31.6 mV,

Spurious & harmonics

Single signal, level equal to range

Intermodulation distortion

nd

2

order and 3rd order

Two signals, level equal to range –6 dB

Image rejection

I/Q crosstalk

RMS voltage in 1 Hz bandwidth

50 Ω, unbalanced setting

50 Ω, balanced setting

1 MΩ, unbalanced setting

1 MΩ, balanced setting

50 Ω: DC to 36 MHz

1 MΩ: DC to 10 MHz, range ≤1 V

50 Ω: DC to 20 MHz

50 Ω: 20 MHz to 36 MHz

1 MΩ: DC to 10 MHz, range ≤ 1 V

aliasing into useful bandwidth from single

out of band signal equal to range

DC to 36 MHz typ. –70 dB

typ. <4 nV
typ. <6 nV
typ.<16 nV
typ. <16 nV

typ. –60 dBc

typ. –75 dBc
typ. –70 dBc
typ. –75 dBc
typ. –75 dB

Phase

Group delay variation versus frequency

aliasing filter on, DC to 30 MHz typ. 1 ns
aliasing filter off, DC to 36 MHz typ. 1 ns

Differential phase between I and Q

DC to 10 MHz typ. 1°
aliasing filter on, >10 MHz to 30 MHz typ. 2°
aliasing filter off, >10 MHz to 36 MHz typ. 2°

Input ports

Channels

Connector each channel balanced or unbalanced 4 × BNC female

Input impedance

unbalanced setting

balanced setting

Return loss

DC to 10 MHz typ. 30 dB
>10 MHz to 36 MHz typ. 20 dB

Input capacitance

2 (I & Q)

common mode

common mode
differential

50 Ω input impedance

with 1 MΩ input impedance setting,

common mode

50 Ω/1 MΩ nominal

50 Ω / 1 MΩ nominal
100 Ω / 2 MΩ nominal

typ. 9 pF

Version 05.00 x April 2005 Signal Analyzer R&S FSQ 17

I/Q Bandwidth Extension R&S FSQ-B72

Frequency

RF Frequency range

R&S FSQ8 40 MHz to 8 GHz
R&S FSQ26 40 MHz to 26.5 GHz
R&S FSQ40 40 MHz to 40 GHz

Useful bandwidth

Bandwidth with equalized frequency
response as specified below

Frequency response

Amplitude flatness

Deviation from linear phase

Output sampling rate

ADC sampling rate

R&S FSQ3 40 MHz to 3.6 GHz

= output sampling rate

f

s

≤3.6 GHz

20.4 MHz < f

81.6 MHz < f

163.2 MHz ≤ f

≤ 81.6 MHz

s

< 163.2 MHz

s

≤ 326.4 MHz

s

>3.6 GHz

20.4 MHz < f

81.6 MHz < f

163.2 MHz ≤ f

≤ 81.6 MHz

s

< 163.2 MHz

s

≤ 326.4 MHz

s

within useful bandwidth,

0.8 × f

s

0.68 × f
60 MHz

0.8 × f

s

0.68 × f
120 MHz

, max. 60 MHz

, max. 60 MHz

s

s

referenced to center frequency

RF attenuation ≥10 dB,

mixer level ≤–10dBm

+20 °C to +30 °C

+20 °C to +30 °C

≤3.6 GHz ±25 MHz
±30 MHz
>3.6 GHz to 26.5 GHz
>26.5 GHz

+5 °C to +45 °C

≤3.6 GHz ±25 MHz
±30 MHz
>3.6 GHz to 26.5 GHz
>26.5 GHz

+20 °C to +30 °C

≤ 3.6 GHz ±25 MHz
±30 MHz
>3.6 GHz to 26.5 GHz

+5 °C to +45 °C

≤3.6 GHz ±25 MHz
±30 MHz
>3.6 GHz to 26.5 GHz

min.

max.

<0.3 dB
<0.6 dB
<0.6 dB
typ. 0.6 dB

<0.4 dB
<0.8 dB
<1 dB
typ. 1 dB

typ. ±2°
typ. ±3°
typ. ±3°

typ. ±3°
typ. ±4°
typ. ±4°

>20.4 MHz

326.4 MHz

326.4 MHz

Level

Level uncertainty

at center frequency,

RF attenuation ≥10 dB,

mixer level ≤–10 dBm

signal level = reference level

+20 °C to +30 °C

≤3.6 GHz

3.6 GHz to 8 GHz
8 GHz to 26.5 GHz

26.5 GHz to 40 GHz

+5 °C to +45 °C

≤3.6 GHz

3.6 GHz to 8 GHz
8 GHz to 26.5 GHz

26.5 GHz to 40 GHz

Level nonlinearity

0 dB to –50 dB, dither on <0.2 dB/10 dB

18 Signal Analyzer R&S FSQ Version 05.00, April 2005

<0.8 dB
<1.5 dB
<2.5 dB
<2.5 dB

<1.2 dB
<2.0 dB
<3.0 dB
<3.5 dB

Dynamic

Spurious response

Without input signal 0 dB RF attenuation <–80 dBm, typ. –100 dBm
With full scale input signal mixer level ≤–10 dBm <–50 dBc, typ. –58 dBc

Third order intermodulation

Rejection of out of band signals

Signal to noise ratio

Noise floor

dBm (1 Hz)

-140

-142

-144

-146

-148

-150

-152

-154

-156

-158

-160

R&S FSQ-B72 typical noise floor

R&S FSQ26
R&S FSQ3/8

0

0.5

1

1.5

2

Susceptibility to radiated emission

two signals,

<–50 dBc, typ. –58 dBc,

level equal to reference level –6 dB

mixer level ≤–20 dBm (each signal)

≤ 3.6 GHz

> 3.6 GHz up to ±750 MHz offset

>±750 MHz offset

mixer level ≥–20 dBm

typ. 100 dB
typ. 60 dB
typ. 0 dB

>125 dBc (1 Hz), typ. 128 dBc (1 Hz)

signal level equal to reference level

RF attenuator 0 dB,

reference level ≤–30 dBm

R&S FSQ3/R&S FSQ8 1 GHz
R&S FSQ8 5 GHz
R&S FSQ26/R&S FSQ40 1 GHz
R&S FSQ26/R&S FSQ40 5 GHz

3

2.5

3.5

RF in GHz

relative to full scale, RF attenuation 0 dB,

reference level ≤–10 dBm,

field strengths 10 V/m

IF frequency band 348 MHz to 468 MHz

image frequency 837.6 MHz to 957.6 MHz

other frequencies

dBm (1 Hz)

-140

-142

-144

-146

-148

-150

-152

-154

-156

-158

-160

<–153 dBm (1 Hz)
<–148 dBm (1 Hz)
<–150 dBm (1 Hz)
<–150 dBm (1 Hz)

R&S FSQ-B72 typical noise floor

R&S FSQ8
R&S FSQ26

3.6 6.6 9.6 12.6

15.6 18.6 21.6 24.6

typ. <–55 dB
typ. <–60 dB
typ. <–75 dB

RF in GHz

General data

Interface GPIB or LAN interface
I/Q memory 16 Msample each for I and Q data
Sampling rate programmable

>20.4 MHz to 326.4 MHz in 0.1 Hz steps

IF pre-filter 3 dB bandwidth ≤3.6 GHz typ. 55 MHz
>3.6 GHz

YIG filter switched off

Version 05.00 x April 2005 Signal Analyzer R&S FSQ 19

typ. 125 MHz

Ordering information

Order designation Type Order No.

Signal Analyzer 20 Hz to 3.6 GHz R&S FSQ3 1155.5001.03

Signal Analyzer 20 Hz to 8 GHz R&S FSQ8 1155.5001.08

Signal Analyzer 20 Hz to 26.5 GHz R&S FSQ26 1155.5001.26

Signal Analyzer 20 Hz to 40 GHz R&S FSQ40 1155.5001.40

Accessories supplied

Power cable, operating manual, service manual,
R&S FSQ26: test port adapter with 3.5 mm female (1021.0512.00) and N female (1021.0535.00) connector
R&S FSQ40: test port adapter with K female (10366.4790.00) and N female (1036.4777.00) connector

Options

Order designation Type Order No. Retrofittable Remarks

Options

OCXO, low aging/improved phase noise at 10 Hz
carrier offset

Tracking Generator, 100 kHz to 3.6 GHz R&S FSU-B9 1142.8994.02 yes
External Generator Control R&S FSP-B10 1129.7246.02 yes
Output Attenuator, 0 dB to 70 dB, for R&S FSU-B9 R&S FSU-B12 1142.9349.02 yes requires R&S FSU-B9
Removable Hard Disk R&S FSQ-B18 1145.0242.05 no
Second Hard Disk for R&S FSQ-B18 R&S FSQ-B19 1145.0394.05 requires R&S FSU-B18
LO/IF ports for external mixers R&S FSU-B21 1157.1090.02 yes only for R&S FSQ26 and

20 dB Preamplifier, 3.6 GHz to 26.5 GHz,
for R&S FSQ26

Electronic Attenuator, 0 dB to 30 dB,
and 20 dB Preamplifier (3.6 GHz)

Analog Baseband Inputs R&S FSQ-B71 1157.0113.03 yes
I/Q Bandwidth Extension R&S FSQ-B72 1157.0336.02 no

Firmware/Software

Noise Measurement Software R&S FS-K3 1057.3028.02 preamplifier (e.g. R&S

Phase Noise Measurement Software R&S FS-K4 1108.0088.02
GSM/EDGE Application Firmware R&S FS-K5 1141.1496.02
FM Measurement Demodulator R&S FS-K7 1141.1796.02
Bluetooth Application Firmware R&S FS-K8 1157.2568.02
Power Sensor Measurements R&S FS-K9 1157.3006.02
Application firmware for Noise Figure and Gain

Measurements
Application Firmware for Phase Noise

Measurement
3GPP BTS/Node B FDD Application Firmware R&S FS-K72 1154.7000.02
3GPP UE FDD Application Firmware R&S FS-K73 1154.7252.02
3 GPP HSDPA BTS Application Firmware R&S FS-K74 1300.7156.02 requires R&S FS-K72
3 GPP TD-SCDMA BTS Application Firmware R&S FS-K76 1300.7291.02
3 GPP TD-SCDMA UE Application Firmware R&S FS-K77 1300.8100.02
CDMA2000/IS-95 (cdma one)/1xEV-DV BTS

Application Firmware
CDMA2000/1xEV-DV MS Application Firmware R&S FS-K83 1157.2416.02
CDMA2000 1xEV-DO BTS Application Firmware R&S FS-K84 1157.2851.02
cdma2000 1xEV-DO MS Application Firmware R&S FS-K85 1300.6689.02
Vector Signal Analysis R&S FSQ-K70 1161.8038.02
WLAN 802.11a Application Firmware R&S FSQ-K90 1157.3064.02
WLAN 802.11a/b/g/j Application Firmware R&S FSQ-K91 1157.3129.02
Upgrade from R&S FSQ-K90 to R&S FSQ-K91 R&S FSQ-K90U 1300.8000.02
WiMAX 802.16-2004 OFDM Application Firmware R&S FSQ-K92 1300.7410.02

R&S FSU-B4 1144.9000.02 yes

R&S FSQ40

R&S FSQ-B23 no only for R&S FSQ26,

requires R&S FSU-B25

R&S FSU-B25 1044.9298.02 yes

FSU-B25) recommended

R&S FS-K30 1300.6508.02 preamplifier (e.g. R&S

FSU-B25) recommended

R&S FS-K40 1161.8138.02

R&S FS-K82 1157.2316.02

20 Signal Analyzer R&S FSQ Version 05.00, April 2005

Recommended extras

Order designation Type Order No.

Headphones 0708.9010.00

US Keyboard with trackball R&S PSP-Z2 1091.4100.02

IEC/IEEE Bus Cable, 1 m R&S PCK 0292.2013.10

IEC/IEEE Bus Cable, 2 m R&S PCK 0292.2013.20

19” Rack Adapter R&S ZZA-411 1096.3283.00

Adapter for mounting on telescopic rails
(only with 19” Adapter R&S ZZA-411)

Matching pads, 50/75 Ω

L Section, matching at both ends R&S RAM 0358.5414.02
Series Resistor, 25 Ω, matching at one end (taken into account in

instrument function RF INPUT 75 Ω)

SWR Bridges, 50 Ω

SWR Bridge, 5 MHz to 3 GHz R&S ZRB2 0373.9017.5X

SWR Bridge, 40 kHz to 4 GHz R&S ZRC 1039.9492.5X

High power attenuators

100 W, 3/6/10/20/30 dB, 1 GHz R&S RBU100 1073.8495.XX

50 W, 3/6/10/20/30 dB, 2 GHz R&S RBU50 1073.8695.XX

50 W, 20 dB, 6 GHz R&S RDL50 1035.1700.52

Connectors and cables

Probe power connector, 3 pin 1065.9480.02

DC blocks

DC Block, 10 kHz to 18 GHz (Type N) R&S FSE-Z4 1084.7443.02

External harmonic mixers (for R&S FSQ26, R&S FSQ40 with option R&S FSU-B21)

Harmonic Mixer 40 GHz to 60 GHz R&S FS-Z60 1089.0799.02

Harmonic Mixer 50 GHz to 75 GHz R&S FS-Z75 1089.0847.02

Harmonic Mixer 60 GHz to 90 GHz R&S FS-Z90 1089.0899.02

Harmonic Mixer 90 GHz to 110 GHz R&S FS-Z110 1089.0976.02

For R&S FSQ26 only:

Test port adapter N male for R&S FSU26 1021.0541.00

Test port adapter 3.5 mm male for R&S FSU26 1021.0529.00

Microwave Measurement Cable with test port adapter set N male and 3.5
mm male for R&S FSQ26 and R&S FSU26

For R&S FSQ40 only:

Test port adapter N male for R&S FSQ40 1036.4783.00

Test port adapter K male for R&S FSQ40 1036.4802.00

Test port adapter 2.4 mm female for R&S FSQ40 R&S FSE-Z5 1088.1627.02

R&S ZZA-T45 1109.3774.00

R&S RAZ 0358.5714.02

(XX = 03/06/10/20/30)

(XX = 03/06/10/20/30)

R&S FSE-Z15 1046.2002.02

Version 05.00 x April 2005 Signal Analyzer R&S FSQ 21

Certified Quality System

ISO 9001

DQS REG. NO 1954 QM

For product brochure, see PD 0758.0945.12

and www.rohde-schwarz.com

(search term: FSQ)

Certified Environmental System

ISO

DQS REG. NO 1954 UM

14001

www.rohde-schwarz.com

Europe: Tel. [phone], e-mail: customersupport @rohde-schwarz.com · North America: Tel. [phone], e-mail: customer.sup port @rsa .rohde-schwar z.co m

Asia: Tel. [phone], e -mail: customer-service @rssg.rohde-schwarz .com

¸is a registered trademark of Rohde & Schwarz GmbH & Co. KG · Trade names are trademarks of the owners · Printed in Germany (Bi as)

PD 0758.0945.22 · ¸FSQ · Version 05.00 · April 2005 · Data without tolerance limits is not binding · Subject to change