Rogers MF636, MF636 User Manual

ZTE Rogers

MF636 USB Modem

Quick Start User Guide

www.ztecanada.com

© ZTE Corporation, 2008.

-1-

1. Insert the SIM Card into the modem

The SIM slot is located above the
USB connector

Before using the modem make sure the SIM
card supports data services. Insert the SIM
card as shown with the gold contacts facing
down and the beveled edg e on the left hand
side.

Push the SIM card in as far as it will go.

2. Connect the USB modem to your PC

Connect the modem to your PC’s USB port directly. You may alternatively use the
supplied USB cable. In most cases the single cable should suffice. However, to
increase the power delivered to the modem, use the double USB cable if required.

After the modem is connected, your PC will launch the installation application
software automatically.

Note: If your security settings prevent Autorun then you will have to start the process
manually. Navigate to the CDROM and double click the Autorun.exe file to start the
software installation

-2-

3. First Time Software Inst allation

Select your language and click OK.

-3-

First Time Software Installation Continued…

Click Next to continue.

-4-

First Time Software Installation Continued…

Read the license agreement, select I accept the terms of the license agreement
and press Next.

-5-