Rogers AC763S User Manual

Sierra Wireless

®

AirCard

763S

Mobile Hotspot

QUICK START GUIDE
GUIDE DE DÉMARRAGE RAPIDE

www.sierrawireless.com

Get to Know Your Device

Navigation key

Power key

External RF
antenna connector

micro USB port

Also in the box:

• Lithium ion battery

• Wall charger

• USB cable

Buttons & keys

Lock the mobile hotspot Press and hold the Navigation key

Unlock the mobile
hotspot

Mute / unmute the audio
alerts

Reset the device to
factory settings

for 3 seconds.

Press and release any key. Press
the Power key to confi rm.

• Press and hold WPS button and

Navigation key for 3 seconds, or

• Press the Navigation key to go

to the Messages / Alerts LCD
screen and follow the prompts.

Press and hold the WPS button
and Power key for 5 seconds and
follow the LCD on-screen prompts.

WPS button

LCD screen

External RF
antenna connector

1

Your Device LCD Screen

21

6543

English

7

8

9

LT E

Rogers

SSID: AirCard-xxxx

Wi-Fi Passphrase: 12345678

To co nĮŐƵre yŽƵƌŚŽƚƐƉŽƚ

10

ŐŽƚŽŚƩƉƌŽŐĞƌƐŚŽƚƐƉŽƚ

11

1

Signal strength

2

Network technology

3

Messages

6

Battery

7

Status icons

8

Operator name

(View at http://rogers.hotspot)

4

GPS fi nding fi x or tracking

5

Wi-Fi on or off
The number indicates

the number of devices

9

Wi-Fi SSID

10

Homepage URL

11

Data usage information

connected.

Press the Navigation key to cycle through the following
screens:

• Connect Info (Wi-Fi SSID and Wi-Fi Passphrase)

• WPS Setup

• Messages/Alerts

• Data Usage/Billing Info

• Device Info/About

2

Step 1: Set up Device

1. Slide the SIM card under the cover, as shown in the
illustration.

2. Insert the battery as shown in the illustration. (The battery
installs easily. If it does not go in easily, check the orientation.
Do not force it.)

Gold contacts

Battery

3. Replace the back cover.

Your AirCard Mobile Hotspot comes with the battery partially
charged. When you need to recharge the battery, use the USB
cable to attach the hotspot to:

• A wall socket, using the AC adapter (fastest option)

• The USB port on your laptop

3

Step 2: Connect to the
Internet

1. Press and hold the P
few seconds. Once powered up, the
mobile hotspot automatically connects
to the mobile broadband network.

The fi rst time you turn on the mobile
hotspot, you’ll be asked to select a language on the LCD.
After that, you can change the language on the homepage.

2. The LCD screen displays the message “Connect your
computer to Wi-Fi network” and shows you the Wi-Fi SSID
(Network name) and Wi-Fi Passphrase.

Rogers

SSID: AirCard-xxxx

To con ĮŐƵre yŽƵƌŚŽƚƐƉŽƚ
go to ŚƩƉƌŽŐĞƌƐŚŽƚƐƉŽƚ

Note: The LCD screen goes into sleep mode to save power. To
wake up the LCD screen, press and release the Power key.

3. On your computer or mobile device, open your Wi-Fi /
network connection manager.

4. Select the Wi-Fi SSID displayed on the LCD screen.

5. When prompted, enter your Wi-Fi Passphrase, as it appears
on the LCD screen.
When the computer or mobile device connects to the mobile
hotspot, a ‘1’ appears beside the Wi-Fi icon on the LCD
screen.

6. Launch your browser and, if desired, go to http://rogers.
hotspot to personalize your settings. (Note: The mobile
hotspot is completely secured using its default security
settings.)

7. Optional step: Depending on your service provider, you may
need to create a profi le to connect to the mobile broadband.
Follow the instructions on page 10.

ower key for a

4

Security Credentials

Wi-Fi Passphrase

• Use to connect a wireless device to your Wi-Fi network

• The Wi-Fi Passphrase is shown on the LCD screen.

Admin Password

• Your default Admin Password is swiadmin.

• Use this password to log in to the AirCard Homepage and
make changes such as enabling GPS or changing your
security settings.

The default Wi-Fi Passphrase and Admin Password are printed
on the label under the battery.

Reset the Wi-Fi Passphrase and Admin
Password

To reset your device to the default settings:

1. Press and hold the WPS button and the Power key for
5 seconds.

2. When prompted, press the Power key.

3. Reconnect your Wi-Fi devices.

Note: If you change your Wi-Fi Passphrase, you may need to
update the saved information in your laptop’s Wi-Fi / network
connection manager.

AirCard Watcher app

Download the complimentary AirCard Watcher app from

www.sierrawireless.com/AirCardApps.
Use this app to view your connection, set­tings, and data usage from your smartphone
or tablet. To manage all hotspot settings, go
to the homepage (http://rogers.hotspot).

5

Mobile Hotspot Homepage

To access your mobile hotspot homepage, connect to your
device, and in your browser, enter http://rogers.hotspot. Log in
with your Admin Password (swiadmin) to modify settings.

Note: Alternatively, you can enter the device IP address

http://192.168.1.1

On the homepage, you can:

• Change the SSID, Wi-Fi Passphrase, Admin Password, and
Wi-Fi encryption

• Set autoconnect options

• Set GPS options

• Use GPS to map or track your location and fi nd nearby
amenities

• View data usage

• Set audio alerts

• View and change other settings

• Check device status

6

Check Your Data Usage

You have two options to view an estimate of your data usage.*

On the mobile hotspot LCD Dashboard:

1. Press the Navigation key to cycle through the screens. The
billing information screen shows your data usage.

Billing Info

Data used from: 2011/06/18
Data transferred: 4.23 MB*
Cycle restarts: 2011/07/01

ĂLJƐůĞŌϭϮĚĂLJƐ

* approximate

On the Homepage:

1. Go to http://rogers.hotspot.

2. Click the Session Data icon.

3. Optionally, set the billing cycle to match your data plan’s
billing date.

* Not accurate for billing purposes.

7