Rockwell Collins VHF-2200 Users manual

Rockwell Collins, Inc.

HFS-2200

Users Manual

This manual provided to the FCC for product guidance, it should not be used by our
OEM customers.

Scope:

This document will detail information required to install and use the HFS-2200 unit.

Introduction:

The Rockwell Collins® HFS-2200 HF Data Radio (HFDR) provides the means to
process transmit and receive data as well as analog voice. The HFDR transceiver
operates on frequencies spaced 100 Hz apart in the 2-30-MHz band. For compatibility
with existing ARINC 719 installations the HFS-2200 provides single sideband
suppressed carrier voice, amplitude modulated equivalent voice, selective calling

(SELCAL™), and analog data functions. In addition to providing traditional HF radio

functionality, the unit contains an internal data modem and controller for ARINC 753
compatibility. Voice transmission is compatible with current single sideband HF
transceivers. Data transmission is compatible with ground HF transmitting and receiving
systems, which use conventional HF transceivers and ARINC 635 compliant modems
and controllers.

Mechanical Description

The HFS-2200 is structured with formed aluminum members that include a front panel, a
rear panel, a bottom panel, a top panel, a central partition that rigidly maintains the
alignment of the other panels, and a swing-out side panel.

Design

The table below details the characteristics of the HFS-2200.

Equipment Characteristics

The HFS-2200 conforms to the following equipment specifications listed in figure 6
according to DO-163, ARINC 635, ARINC 719-5, and ARINC 753-3.