SDS-823X
TM
Trusted
Industrial Control System
TrustedTM Power system-T823X
DESCRIPTION
The Trusted
designed to convert main line voltages of either 110V/240Vac. Outputs are
either 24Vdc for Trusted
The power supply system consists of a 1U Power Shelf with mechanical
support, containing up to three 750W Power Packs. The Power Packs load
share in configurations using 1 or more Power Shelf. Each Power Pack has
an individual supply connection via a mechanically retained IEC320 type
connector. Each Power Shelf can supply 2250Watts of power or 1500Watts
with n+1 redundancy from a single source. Multiple units can be connected
for further capacity or redundancy requirements.
Diagnostics information of Power Pack status is provided via the Power Port,
which connects to the rear of the Power Shelf. This device monitors input
and output conditions and reports out of range faults and over
temperature/fan failure using relay contacts. The Power Port also allows
connection of the optional rack mounted Power Controller for live
configuration of output voltage and current, monitoring up to 12 Power
Packs in 4 Power Shelves.
Product No. Product name Description
T8230 Power Shelf
T8231 Power Pack 24Vdc 750Watt, universal input, 24Vdc out.
T8232 Power Pack 28Vdc 750Watt, universal input, 28Vdc out.
T8233 Power Port Plug in diagnostic interface.
T8234 Power Controller For live adjustment of output voltage.
T8235 Power Shield Covers unused Power Pack positions
TC323 Power Shelf Interconnect
TM
Power System is a high density flexible power supply
M
T
product or 24-28Vdc adjustable field power.
19” x 1U chassis for up to 3 Power Packs.
Includes 4U fixing kit, Power Port and
mains plugs.
19”x1U
Ribbon cable for power sharing between
2-4 Power Shelves and connection to
FEATURES
Redundant and N+1
onfigurations
c
Hot replaceable power
Packs
Current sharing
Current limiting
Power factor correction
Diagnostics contacts
Configurable output voltage
Input/output fail
diagnostics per power pack
Issue 3 Jan 2006
SDS-823X
Trusted
TM
Industrial Control System
TrustedTM Power system-T823X
ASSEMBLY LAYOUT
ELECTRICAL SPECIFICATION
Voltage Range - Input
Voltage Range - Output
Frequency Range
Inrush Current
Power Factor
Efficiency
Hold-up Time
Output Power
Isolation voltage
90V ac to 264V ac
24Vdc or 28V dc (23-28 adjustable)
47Hz to 63Hz
50A max
0.95min, 0.99typical
78 – 84%
20ms min
750W per Power Pack
3kVac, Primary to secondary
1.5kVac Primary or secondary to ground
MECHANICAL
SPECIFICATION
Dimensions (HxWxD):
43.5mm x 483mm x
340mm
(1.71ins x 19ins x
13.36ins)
Note: Mounting bracket
requires minimum 4U
rack height. Unused
space may be populated
by other equipment.
Weight (fully populated)
10kg (approx.)
22lbs (approx.)
ENVIRONMENTAL
Operating Temperature:
0°C to 60°C
(30°F to 140°F)
Operating Humidity:
5 to 95%, noncondensing
Vibration:
10 to 57Hz ±0.075mm
57 to 150Hz 1g
Shock:
15g, ½ sine wave, 11ms
EMI (IEC 801):
ESD
Air discharge to 15kV
Contact discharge to 8kV
Radiated Fields
10V/m, 27MHz to
500MHz
Transients and Bursts
2kV, 2.5kHz for
t=60 seconds
ICS Triplex
Technical data sheets are intended for
information and guidance. The Company
has a policy of continual product
development and improvement.
Specifications are subject to change
without notice. For latest information, visit
our Websi te:- www.icstr iple x.com