![](/html/96/9650/96501e041252592651f2566b3113656818086da7a813cccbfd2dee406cf04b7f/bg1.png)
SDS-8200
TM
Trusted
Industrial Control System
TrustedTM High Integrity Power Supply-T8200
FRONT PANEL
DESCRIPTION
The Trusted
voltages of either 110V ac/240V dc, or 24V dc to +15V dc or 24V dc output
power for ICS product power requirements.
The power supply assembly consists of a power supply chassis containing
up to six 250W power modules. Each of these power modules can be
selected to operate from either single or dual power sources. The power
supply chassis can be configured to provide different output power
combinations. These can range from six independent 250W supplies,
through a fully redundant 750W supply to a 1250W N+1 unit with dual power
feeds.
The power supply chassis may be mounted in a 19-inch rack or flush
mounted on a panel. The table below identifies the available types of
chassis.
TM
High Integrity Power Supply is designed to convert main line
Catalogue No. Chassis Unit Input Voltage
T8200 I/O Power Supply Chassis 110-240V ac, 50/60 Hz
T8201 I/O Power Supply Chassis 110-240V ac, 50/60 Hz
T8202 I/O Power Supply Chassis 24V dc
FEATURES
Redundant power inputs
1500W
Hot replaceable power
modules
Current sharing
Constant current limiting
Power factor correction
Front panel indicators for
input/output voltage status,
and output current level on
each module
External status signals
provided
Direct replacement for
Regent I/O Power Supply
Chassis T3500, T3501 and
T3502 using modules
supplying 15V dc (T8220,
T8222 and T8224)
The power supply assembly modules are single (if redundant inputs are not
required) and dual input, hot swap, user-replaceable ac and dc units. The
table below identifies the available types of modules.
T8220 Dual 110-240V ac 15V dc
T8222 Dual 24V dc 15V dc
T8223 Single 110-240V ac 24V dc
T8224 Single 110-240V ac 15 V dc
T8225 Dual 110-240V ac 24V dc
T8226 Dual 24V dc 24V dc
Issue 6 Jan 2006
![](/html/96/9650/96501e041252592651f2566b3113656818086da7a813cccbfd2dee406cf04b7f/bg2.png)
SDS-8200
Trusted
TM
Industrial Control System
TrustedTM High Integrity Power Supply-T8200
ELECTRICAL SPECIFICATION
Voltage Range
T8220, T8223, T8224, T8225
T8222, T8226
Frequency Range
T8220, T8223, T8224, T8225 47Hz to 63Hz
Inrush Current
T8220, T8223, T8224, T8225 20/40A (peak) Cold, 35/65A (peak) Hot
Power Factor
Efficiency
Use With Chassis
T8220, T8223, T8224, T8225
T8222, T8226
Fusing (internal to module)
T8220, T8222, T8224
T8223, T8225, T8226
Output Voltage
T8220, T8223, T8224, T8225
T8222, T8226
Output Power
Power Hold-up Time
T8220, T8223, T8224, T8225
T8222, T8226
85V ac to 264V ac
20V dc to 30V dc
0.95min
70%
T8200
T8202
6A, 250V, 3AG Slow Blow
20A, 250V 3AG Slow Blow
+15V dc
+24V dc
250W per module
20ms minimum
1ms minimum
MECHANICAL
SPECIFICATION
Dimensions (HxWxD):
266mm x 483mm x
343mm
(10.47ins x 19ins x
13.5ins)
Weight (fully populated)
26.5kg (approx.)
(58.4lbs approx.)
ENVIRONMENTAL
Operating Temperature:
-5°C to 60°C
(23°F to 140°F)
Operating Humidity:
5 to 95%, noncondensing
Vibration:
10 to 57Hz ±0.075mm
57 to 150Hz 1g
Shock:
15g, ½ sine wave, 11ms
EMI (IEC 801):
ESD
Air discharge to 15kV
Contact discharge to 8kV
Radiated Fields
10V/m, 27MHz to
500MHz
Transients and Bursts
2kV, 2.5kHz for
t=60 seconds
ICS Triplex
Technical data sheets are intended for
information and guidance. The Company
has a policy of continual product
development and improvement.
Specifications are subject to change
without notice. For latest information, visit
our Websi te:- www.icstr iplex. com