Rockwell 100-M, 100-C, 104-C, 100S-C, 104S-C User Manual
...
Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6, 100-G
Contactors
Bulletin 100-M, 100-C,
CAB6
Contactors
• Bulletin 100-M
2.2 … 5.5 kW
• Bulletin 100-C
4 … 45 kW
• Bulletin CAB6
45 … 220 kW
Bulletin 100S, 104S
Safety Contactors
• Bulletin 100S, 104S
4 … 45 kW
Bulletin 100-G
Contactors
Pages
4-9 … 4-64
w
e
N
Pages
4-65 … 4-78
4
• Bulletin 100-G
315 … 710 kW
Contactor Overview
AC-3 / 400 VAC
100-G (550…1200 A)
CAB6 (85…420 A)
100-C (9…85 A)
100-M (5…12 A)
[kW] 2.2 4 5.5 45 220 710
Rockwell Automation 4-1
Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6, 100-G
Contactors
Overview - Bulletin 100-M
Connection module (Eco starter)
for circuit breakers 140M
4
Miniature Contactor
100-M12N…
Auxiliary contact block
2 poles
Auxiliary contact block
4 poles
Suppressor module
RC, Diode,
Varistor
Connecting kit
Latched miniature contactor
100-ML09N…
Reversing contactor
104-M
Mechanical
interlock
Timer
for pick-up delay
Timer for Y-∆ control
switching delay
4-2 Rockwell Automation
Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6, 100-G
Contactors
Overview - Bulletin 100-M
Minimum Space Requirements for Accessories
Auxiliary contact blocks and timers can be mounted onto the contactor
without requiring additional panel space.
4
Positive Guidance of the Contacts
Positive guidance of the contacts according to IEC 60947-5-1 is given
when it is ensured, that N.C. and N.O. contacts can never be closed at
the same time. Therefore a minimum opening distance of 0.5 mm is
prescribed in the event of failure. All contacts in the basic device are
positively guided as well as the normally closed contacts in the auxiliary
contact block except Bulletin 700-MB bifurcated contacts. This permits
use within safety controls.
High Contact Reliability
Bulletin 100-M Miniature Contactors are rated for extra-low voltage. In
addition to the isolation of the contact housing, high contact reliability is
ensured by the special design of the auxiliary contacts:
• cross-stamped in the main contactor
• in the auxiliary contact block and in the bifurcated contacts (see chapter 8, Bulletin 700-M timers), H-contact bridges with constant sliding
rolling motion and 4 multiple current path.
Rockwell Automation 4-3
Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6, 100-G
Contactors
Overview - Bulletin 100-C
Connection module
for circuit breakers 140M
Solid-State timing module
4
Interface
Suppressor module
RC, Diode, Varistor
for Y-∆ control
switching delay
Solid-State timing module
pick-up delay
Connection set
Contactor
100-C09…C23
Contactor
100-C30, C37
Contactor
100-C43
Mechanical
interlock
Contactor
100-C60…C85
Pneumatic
timing module
Mechanical
latch
Auxiliary contact blocks
for side mounting
1- and 2-pole
Auxiliary contact blocks
for front mounting
2-pole
Auxiliary contact blocks
for front mounting
4-pole
4-4 Rockwell Automation
Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6, 100-G
Contactors
Overview - Bulletin 100-C, 100S-C
Compact design
Bulletin 100-C contactors switch more power and use less panel space. Despite
their small dimensions, they are powerful enough for use with the high starting
currents of today’s modern motors.
45 mm
9 A, 12 A,
16 A, 23 A
(AC-3 at 400/415 V)
45 mm
30 A,
37 A
54 mm
43 A
72 mm
60 A, 72 A,
85 A
4
Bulletin 100-C contactors for good connections
Two separate power connections per pole offer ease of wiring and high connection
reliability. The modern connection technology used by Bulletin 100-C contactors
saves both time and money.
Coil always positioned correctly
The dual connection technology always positions the coil connection for optimal
accessibility, whether below (on starters with circuit breakers), or above (on starters
using the revolutionary Bulletin 193-E Electronic Overload relay). Space- and costsaving coil modules (interface devices, protection elements, Electronic timers) can
always be added. When ordering, select the desired position of the coil connections. The position of the coil connections can also be adapted locally within seconds, using simple tools.
Uniform accessories for the entire line of contactors
All Bulletin 100-C accessories can be used with all contactor sizes.The mechanical
interlock with integrated interlock contacts can be used alone to interlock the smallest AC contactor with the largest.
Bulletin 100-C contactors for highest security
Bulletin 100-C contactors are rated for high personal protection and functional
security. The safety package consists of amongst other things
finger and back of hand accidental contact protection.
• Secure isolation of electric circuits
• Positively guided contacts
• Cover to prevent manual operation.
Comprehensive Safety for Operating Personnel and the Machine
The safety of both operators and machinery becomes more and more important.
Electrical controls can play an important contribution to safety. Various rules and
standards define the components and systems that are used in safety applications.
• Positively guided contacts according to IEC 947-5-1
• Fixed coupling of contactor and auxiliary contact block
• Protection against unintended actuation
• Auxiliary contacts that are electronically compatible according to DIN 19240
Positive Guidance of the Contacts
Positive guidance of contacts according to IEC 60947-5-1 is given when it
is ensured, that N.C. and N.O. contacts are never able to be closed at the same
time. Therefore a minimum opening distance of 0.5 mm is prescribed in the event
of failure. All contacts in the basic device are positively guided as well as the
normally closed contacts in the auxiliary contact block. The contacts in the basic
device as well as in the auxiliary contact blocks are guided restricted. The restricted
guidance also applies between basic device and accessories.
Rockwell Automation 4-5
Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6, 100-G
Contactors
Overview - Bulletin CAB6
Terminal block
4
Contactor
Auxiliary contact block
CAB6-85…
Mechanical
interlock
Star Bridge
Contactor
CAB6-210…
Connection set
Auxiliary contact blocks
Easy-to-wire coil connections
Max. 2 auxiliary contacts per
side, left- and right-side mounted
Isolated switching position inhibits
manual operation
Suppressor module
RC, Diode, Varistor
Interface integrated with CAB6-105-EI
Threaded connections
Completely enclosed arcing chamber
Safety lock for arcing chamber and
contact holders
4-6 Rockwell Automation
Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6, 100-G
Contactors
Overview - Bulletin CAB6
Bulletin CAB6 Contactors with electronically controlled Coil Mechanism
Bulletin CAB6 contactors are equipped with electronically controlled coil mechanisms and integrated interface starting from size
CAB6-105-EI. Size CAB6-85 is equipped with conventional coils and sizes CAB6-105 and CAB6-140 can be equipped with either
conventional or electronic coils. Contactors with electronic coils are characterised by the -El suffix. By offering control options, a
multitude of possibilities are at the user's disposal:
• Integrated interface
The factory supplied CAB6-EI range features an interface module that can be
activated and deactivated via an externally accessible jumper unit. With the
interface, the contactor can be addressed directly by a 24 V DC signal from a
programmable logic controller. The max. allowable current of the interface is 15
mA (DIN VDE 19240). The Interface input is separated from the coil circuit by
photoelectric.
• Protective circuit included
All EI-type contactors have a protective circuit as standard.
• Low pick-up and holding power
When compared with conventional contactors, the current requirement is substantially lowered by the construction of the contactor, particularly via the electronic control.
4
CAB6-85…170
• Wide voltage range
Despite the wide voltage range (e.g., 208...277 V AC) the min./max. values of
the IEC tolerances are kept between -0.85 and +1.1.
• Compact dimensions
New, compact construction solutions and the application of electronics substantially reduces the dimensions. Two housing sizes cover the entire range from
85...420 A (AC-3). Simple and efficient wiring is ensured by the identical connection height of the main pole on both housing sizes.
Bulletin CAB6 contactors can be mechanically interlocked, without needing additional mounting space.
110 mm
CAB6-210…420
• Defined on- and off- points
Electronic control guarantees defined points of switching on and off, thus preventing chatter and damage to the contactor.
• Environmentally friendly
Construction and contact materials do not contain cadmium, asbestos or PCBs
and can be recycled at the end of the contactor life. Most plastic parts are characterised according to DIN 54840.
• Frame terminal blocks
Go safe! Contact protection is fulfilled by attachable terminal covers according
to DIN VDE 0106 and VBG 4. By using framework terminal blocks the contactor
automatically becomes finger-safe per IP20.
Rockwell Automation 4-7
Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6, 100-G
Contactors
Overview - Bulletin 100-G / CA 5
Contactor
100-G / CA 5
4
Auxiliary contact block
Supply module
Mechanical interlock
(horizontal construction)
Mechanical interlock
(vertical construction)
Fourth pole
Coil sets
Mechanical latch
Good reasons to select Rockwell
Automation contactors
• Allen-Bradley contactors are built for a global marketplace
and fulfill all applicable IEC 947 requirements.
• Worldwide acceptance and high stock availability in all
countries increases security for the user.
• A wide range of accessories (e.g., auxiliary contact blocks,
interfaces, control and timing modules) make contactors
ideal and economical building blocks for individual
control needs.
4-8 Rockwell Automation
Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6
Contactors
Bulletin 100-M
Miniature Contactors
• Bulletin 100-M
2.2 … 5.5 kW (5 … 12 A)
Bulletin 100-C, CAB6
Contactors
• Bulletin 100-C
4 … 45 kW (9 … 85 A)
• Bulletin 104-C
4 … 45 kW (9 … 85 A)
• Bulletin CAB6
45 … 220 kW (85 … 420 A)
Bulletin 100S, 104S
Safety Contactors
• Bulletin 100S-C
4 … 45 kW (9 … 85 A)
• Bulletin 104S-C
4 … 45 kW (9 … 85 A)
4
Table of Contents
Description Page Description Page
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Product Selection
AC Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10
DC Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12
Special Versions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14
Reversing Contactors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16
Safety Contactors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18
Accessories
Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-24
Mounting Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-31
Labelling Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-33
Renewal Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-33
Specifications
Performance Data / Characteristics . . . . . . . . . . . . . . . . . . . . .4-36
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-44
Standards and Approvals. . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-49
Electrical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-51
Permissible Switching Rate . . . . . . . . . . . . . . . . . . . . . . . . . . .4-57
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-61
Rockwell Automation 4-9
Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6
Contactors
Product Selection
3-pole Contactors
• AC control
• 3 main contacts
4
100-M CAB6100-C 100-C
AC-1
(40 °C)
[A] 230 V 400 / 415 V 500 V 690 V 230 V 400 / 415 V 500 V 690 V
20 1.5 2.2 2.2 — 6.5 5.3 4 —
20 3 4 4 — 12 9 7 —
20 3 5.5 ➋ 4 — 12 12 ➋ 7—
32 3 4 4 4 12 9 7 5
32 4 5.5 5.5 5.5 15 12 10 7
32 5.5 7.5 7.5 7.5 20 16 14 9
32 7.5 11 13 10 26.5 23 20 12
50 10 15 15 15 35 30 25 18
50 11 18.5 / 20 20 18.5 38 37 30 21
85 13 22 25 22 44 43 38 25
10018.5 32 373262 60 5534
10022 40 454072 72 6742
10025 45 554585 85 8049
16025 45 558085 85 8585
160 32 55 63 100 105 105 105 105
250 45 75
250 55 90 / 100 110 160 170 170 170 170
350 63 110 150 200 210 210 210 210
350 80 132 / 150 160 250 250 250 250 250
450 90 160 200 300 300 300 300 300
500 132 220 / 250
Bulletin CAB contactors are suitable for use with operating voltages up to 1000V. Bulletin CAB6-...-El contactors are equipped with electronic coil control ⊕ ⊗
➊ Power ratings: Preferred values according to IEC 60072-1
➋ Value applies only to AC-2 and AC-3
➌ Value applies only to AC-2 and AC-3; AC-4: 360 A
Switching of 3-phase Motors AC-2, AC-3, AC-4 (60 °C)
[kW] ➊ [A]
80 110 140 140 115 115
90 132 140 140 140 140
300 ➌ 425 ➌
420 420
420 ➌ 420 ➌
Auxiliary
Contacts
Integrated
1 0 100-M05N ⊗ 3 ✪
0 1 100-M05N ⊗ 31 ✪
1 0 100-M09N ⊗ 3 ✪
0 1 100-M09N ⊗ 31 ✪
1 0 100-M12N ⊗ 3 ✪
0 1 100-M12N ⊗ 31 ✪
1 0 100-C09 ⊕ ⊗ 10 ✫
0 1 100-C09 ⊕ ⊗ 01 ✫
1 0 100-C12 ⊕ ⊗ 10 ✫
0 1 100-C12 ⊕ ⊗ 01 ✫
1 0 100-C16 ⊕ ⊗ 10 ✫
0 1 100-C16 ⊕ ⊗ 01 ✫
1 0 100-C23 ⊕ ⊗ 10 ✫
0 1 100-C23 ⊕ ⊗ 01 ✫
0 0 100-C30 ⊕ ⊗ 00 ✫
0 0 100-C37 ⊕ ⊗ 00 ✫
0 0 100-C43 ⊕ ⊗ 00
0 0 100-C60 ⊕ ⊗ 00
0 0 100-C72 ⊕ ⊗ 00
0 0 100-C85 ⊕ ⊗ 00
0 0 CAB6-85-00- ⊗
1 1 CAB6-85-11- ⊗
0 0 CAB6-105-00- ⊗
1 1 CAB6-105-11- ⊗
0 0 CAB6-105-EI-00- ⊗
1 1 CAB6-105-EI-11- ⊗
0 0 CAB6-140-00- ⊗
1 1 CAB6-140-11- ⊗
0 0 CAB6-140-EI-00- ⊗
1 1 CAB6-140-EI-11- ⊗
0 0 CAB6-170-EI-00- ⊗
1 1 CAB6-170-EI-11- ⊗
0 0 CAB6-210-EI-00- ⊗
1 1 CAB6-210-EI-11- ⊗
0 0 CAB6-250-EI-00- ⊗
1 1 CAB6-250-EI-11- ⊗
0 0 CAB6-300-EI-00- ⊗
1 1 CAB6-300-EI-11- ⊗
0 0 CAB6-420-EI-00- ⊗
1 1 CAB6-420-EI-11- ⊗
Cat. No. PQ
1
1
PQ = Package Quantity
Accessories - Page 4-24
Specifications - Page 4-36
Dimensions - Page 4-61
4-10 Rockwell Automation
Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6
Contactors
Product Selection
Selection of Options
Options Cat. No. Suffix Description Ordering Example
⊕ Coil connection position
⊗ Voltage suffix code e.g. KJ Voltage suffix code from table below 100-C09KJ10
✪ Package quantity 100-M
✫ Package quantity 100-C
Attention:
Bulletin 100-M…S: standard quantity = single item (1 piece)
!
Bulletin 100-C, CAB6: standard quantity = single item (1 piece)
⊗ Voltage Suffix Codes for AC Control
100-M
100-C
CAB6-85…CAB6-140 ➍
CAB6-105-EI…CAB6-250-E ➎
CAB6-300-EI…CAB6-420-EI ➎
No Entry Line-side coil connection (above, standard quantity) 100-C09⊗10
U Load-side coil connection (below) 100-C09U⊗10
No Entry Multi-pack (10 pieces) (Only KD, D, KF, KK) 100-M09N⊗3
S Single item (1 piece, standard quantity) 100-M09N⊗3S
No Entry Single item (1 piece, standard quantity) 100-C09⊗10
M Multi-pack (20 pieces) 100-C09⊗10M
[V] 24 48 110
50 Hz
60 Hz — — — D — — (A) — — KK
50/60 Hz KD KH — — KF — — (KT) — —
50 Hz
60 Hz (Q) (J) — (V) — (X) — (KP) — (D) — — (KG) — (L)
50/60 Hz
50 Hz
60 Hz — — — (A) (T) (I) (E) — — — (N) (B) — — (C)
50/60 Hz — KF — (KA) — — — — KN — (KB) — — — —
50 Hz
60 Hz
50/60 Hz — — — — (48) — — 54 (55) — — — — — —
50/60 Hz
50/60 Hz
— — D — — (A) — — KK
[V]122432 36 42 48100
(R) (K) (V) (W) (X) (Y) (KP) — (D) (P) (S) (KG) — — —
— KJ — — — KY (KP) — KD — — (KG) — (KL) —
220-
[V]
[V] 24 28 48 55 110 127
[V]
230
230
(F) — (VA) (T) — — — (N) — (G) (B) — (M) (C) —
05 — 08 — 10 — 13 — (15) — — 16 (17) — —
— 05 — 08 — 10 — — — 13 (15) — — 16 (17)
24-2843-65110-
05 08 10 14 16
— 08 10 14 16
110-
120
230-
240 277 347 380
240
208-
130
277
230
380-
400
220-
230
230-
240
220-
230
380-
240
400
100-
110 120 127 200
110
380-
400
400
230 240 260 277
400-
415
200-
220
400-
440 480 500 550 600
415
380-
415
400
200-
230
440-
460
208-
240
480
4
Price Adder for: Type Available Control Voltages No Surcharge
100-M 12…500 V 50 Hz, 12…600 V 60 Hz > 25 pieces
Special control voltages
CAB6-85…CAB6-140 ➍ 21…550 V 50 Hz, 21…575 V 60 Hz, 110…240 V 50/60 Hz > 25 pieces
( ) Control voltages in parentheses: No inventory
➍ 50/60 Hz coil only available for CAB6-85 and 105
➎ Signal voltage of the CAB6...EI electronic interface: U
100-C 12…600 V 50 Hz, 12…600 V 60 Hz > 20 pieces
: 24 VDC / Ie: 15 mA
e
Logical 1: 13.0 VDC…30.2 VDC
Logical 0: -3.0 VDC…+5.0 VDC
Accessories - Site 4-24
Specifications - Page 4-36
Dimensions - Page 4-61
Rockwell Automation 4-11
Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6
Contactors
Product Selection
3-pole Contactors
• DC control
• 3 main contacts
4
100-M..Z CAB6100-C..Z 100-C..Z
AC-1
(40 °C)
[A] 230 V 400 / 415 V 500 V 690 V 230 V 400 / 415 V 500 V 690 V
20 1.5 2.2 2.2 — 6.5 5.3 4 —
20344—1297—
20 3 5.5 ➋ 4—12 12 ➋ 7—
323444129 75
32 4 5.5 5.5 5.5 15 12 10 7
32 5.5 7.5 7.5 7.5 20 16 14 9
32 7.5 11 13 10 26.5 23 20 12
50 10 15 15 15 35 30 25 18 0 0
50 11 18.5 / 20 20 18.5 38 37 30 21 0 0 100-C37 ⊕ ⊗ 00 ✫
85 13 22 25 22 44 43 38 25 0 0 100-C43 ⊕ ⊗ 00
10018.5 32 373262 60 5534 0 0
10022 40 454072 72 6742 0 0 100-C72 ⊕ ⊗ 00
10025 45 554585 85 8049 0 0 100-C85 ⊕ ⊗ 00
16025 45 558085 85 8585
160 32 55 63 100 105 105 105 105
250 45 75
250 55 90 / 100 110 160 170 170 170 170
350 63 110 150 200 210 210 210 210
350 80 132 / 150 160 250 250 250 250 250
450 90 160 200 300 300 300 300 300
500 132 220 / 250 300 ➌ 425 ➌ 420 420 420 ➌ 420 ➌
Bulletin CAB contactors are suitable for use with operating voltages up to 1000V. Bulletin CAB6-...-El contactors are equipped with electronic coil control
➊ Power ratings: Preferred values according to IEC 60072-1
➋ Value applies only to AC-2 and AC-3
➌ Value applies only to AC-2 and AC-3; AC-4: 360 A
Switching of 3-phase Motors AC-2, AC-3, AC-4 (60 °C)
[kW] ➊ [A]
80 110 140 140 115 115 2 2 CAB6-140-L22- ⊗
90 132 140 140 140 140
Auxiliary
Contacts
Internal
1
0 1 100-M05N ⊗ 31 ✪
1
0 1 100-M09N ⊗ 31 ✪
1 0 100-M12N ⊗ 3 ✪
0
1 0 100-C09 ⊕ ⊗ 10 ✫
0 1 100-C09 ⊕ ⊗ 01 ✫
1
0 1 100-C12 ⊕ ⊗ 01 ✫
1 0 100-C16 ⊕ ⊗ 10 ✫
0
1 0 100-C23 ⊕ ⊗ 10 ✫
0 1 100-C23 ⊕ ⊗ 01 ✫
2 2 CAB6-85-L22- ⊗
2 2 CAB6-105-L22- ⊗
0 0 CAB6-105-EI-00- ⊗
1 1 CAB6-105-EI-11- ⊗
0 0 CAB6-140-EI-00- ⊗
1 1 CAB6-140-EI-11- ⊗
0 0 CAB6-170-EI-00- ⊗
1 1 CAB6-170-EI-11- ⊗
0 0 CAB6-210-EI-00- ⊗
1 1 CAB6-210-EI-11- ⊗
0 0 CAB6-250-EI-00- ⊗
1 1 CAB6-250-EI-11- ⊗
0 0 CAB6-300-EI-00- ⊗
1 1 CAB6-300-EI-11- ⊗
0 0 CAB6-420-EI-00- ⊗
1 1 CAB6-420-EI-11- ⊗
0 100-M05N ⊗ 3 ✪
0 100-M09N ⊗ 3 ✪
1 100-M12N ⊗ 31 ✪
0 100-C12 ⊕ ⊗ 10 ✫
1 100-C16 ⊕ ⊗ 01 ✫
Cat. No. PQ
100-C30 ⊕ ⊗ 00 ✫
100-C60 ⊕ ⊗ 00
1
1
PQ = Package Quantity
Accessories - Site 4-24
Specifications - Page 4-36
Dimensions - Page 4-61
4-12 Rockwell Automation
Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6
Contactors
Product Selection
Selection of Options
Options Cat. No. Suffix Description Ordering Example
⊕ Coil connection position
⊗ Voltage suffix code e.g. ZJ Voltage suffix code from table below 100-C09ZJ10
✪ Package quantity 100-M
✫ Package quantity 100-C
Attention:
Bulletin 100-M…S: standard quantity = single item (1 piece)
!
Bulletin 100-C, CAB6: standard quantity = single item (1 piece)
⊗ Voltage Suffix Codes for DC Control
100-M
with diode protection circuit DC ZD24 — —
100-C09…C43
with diode protection circuit DC — — DJ — — — — — — — — — — — —
100-C60…C85 DC — — — — — — — — — — — — — — —
with diode protection circuit DC (DR) (DQ) DJ (DW) (DY) (DZ) (DB) (DG) (DE) DD (DP) (DS) (DA) (DF) (DT)
CAB6-85…CAB6-140 ➏
CAB6-105-EI…CAB6-300-EI
CAB6-420-EI DC — (70) — 76 — (86)
No Entry Line-side coil connection (above, standard quantity) 100-C09⊗10
U Load-side coil connection (below) 100-C09U⊗10
No Entry Multi-pack (10 pieces) (Only Z24, ZD24) 100-M09N⊗3
S Single item (1 piece, standard quantity) 100-M09N⊗3S
No Entry Single item (1 piece, standard quantity) 100-C09⊗10
M Multi-pack (20 pieces) 100-C09⊗10M
[V] 24 48 110 220
DC
Z24 (Z48) Z11 (Z2)
[V] 9 ➍ 12 24 ➎ 36 48 60 64 72 80 110 115 125 220 230 250
DC
(ZR) (ZQ) ZJ (ZW) (ZY) (ZZ) (ZB) (ZG) (ZE) ZD (ZP) (ZS) (ZA) (ZF) (ZT)
[V] 24 48 110 220
DC
66 (70) 76 (86)
24-2848-7290-
[V]
66 (70) 76 — (86) —
DC
135
110-
135
170-
255
190-
255
4
Price Adder for: Type Available Control Voltages No Surcharge
100-M..Z 12…250 VDC > 25 pieces
Special control voltages
( ) Control voltages in parentheses: No inventory
➍ Extended operating limits 0.65…1.3 x U
➎ Extended operating limits 0.7…1.25 x U
➏ With conventional DC control, the pickup winding must be interconnected with the late-breaking auxiliary contacts
s
s
100-C..Z 12…250 VDC > 20 pieces
CAB6-85…CAB6-140 24…240 VDC > 25 pieces
Accessories - Page 4-24
Specifications - Page 4-36
Dimensions - Page 4-61
Rockwell Automation 4-13
Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6
Contactors
Product Selection
Special Versions
• AC / DC control
•
• 4-pole contactors
• Latched contactors
4
100-M
100-C
4-pole Contactors Bulletin 100-M, 100-C
AC-1
(40°C)
[A] 230 V 400 / 415 V 500 V 690 V 230 V 400 / 415 V 500 V 690 V
20 3 4 4 — 12 9 7 — 4 0 AC/DC
32 7.5 11 13 10 26.5 23 20 12
(4-pole 100-C09…C16 contactors available upon request)
Switching of 3-phase Motors AC-2, AC-3, AC-4 ➊ (60 °C)
[kW] ➋ [A]
Main Poles
(Fitted)
40AC/DC
31
22 100-C23 ⊕ ⊗ 200 ✫
Latched Contactors Bulletin 100-ML
Auxiliary
AC-1
(40°C)
[A] 230 V 400 / 415 V 500 V 690 V 230 V 400 / 415 V 500 V 690 V
20344—1297—
Switching of 3-phase Motors AC-2, AC-3, AC-4 (60 °C)
[kW] [A]
Contacts
Latched
Contactors
10 AC
01 AC
Available
Options
AC/DC ➌
Available
Options
100-ML
Cat. No. PQ
100-M09N ⊗ 4 ✪
100-C23 ⊕ ⊗ 400 ✫
100-C23 ⊕ ⊗ 300 ✫
Cat. No. PQ
100-ML09N⊗3
100-ML09N⊗31
1
Options Cat. No. Suffix Description Ordering Example
⊕ Coil connection position
⊗ Tension de commande e.g. KJ Voltage suffix code from table below 100-C23KJ400
✪ Package quantity 100-M
✫ Package quantity 100-C
➊ AC-4 value only for contact assembly with 3 resp, 4 N.O. contacts
➋ Power ratings: Preferred values according to IEC 60072-1
➌ No inventory
No Entry Line-side coil connection (above, standard quantity) 100-C23⊗400
U Load-side coil connection (below) 100-C23U⊗400
No Entry Multi-pack (10 pieces) (Only KD, D, KF, KK, Z24, ZD24) 100-M09N⊗4
S Single item (1 piece, standard quantity) 100-M09N⊗4S
No Entry Single item (1 piece, standard quantity) 100-C23⊗400
M Multi-pack (20 pieces) 100-C23⊗400M
Attention:
Bulletin 100-M…S: standard quantity = single item (1 piece)
!
PQ = Package Quantity
Accessories - Site 4-24
Specifications - Page 4-36
Dimensions - Page 4-61
Bulletin 100-C: standard quantity = single item (1 piece)
4-14 Rockwell Automation
Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6
Contactors
Product Selection
⊗ Voltage Suffix Codes for AC Control
110-
120
230-
240 277 347 380
240
100-M
100-C
[V] 24 48 110
50 Hz
60 Hz — — — D — — (A) — — KK
50/60 Hz
50 Hz
60 Hz (Q) (J) — (V) — (X) — (KP) — (D) — — (KG) — (L)
50/60 Hz — KJ — — — KY (KP) — KD — — (KG) — (KL) —
50 Hz
60 Hz — — — (A) (T) (I) (E) — — — (N) (B) — — (C)
50/60 Hz
— — D — — (A) — — KK
KD KH — — KF — — (KT) — —
[V]122432364248100
(R) (K) (V) (W) (X) (Y) (KP) — (D) (P) (S) (KG) — — —
220-
[V]
230
230
(F) — (VA) (T) — — — (N) — (G) (B) — (M) (C) —
— KF — (KA) — — — — KN — (KB) — — — —
⊗ Voltage Suffix Codes for DC Control
100-M
with diode protection circuit DC ZD24 — —
100-C09…C43
with diode protection circuit DC
100-C60…C85 DC — — — — — — — — — — — — — — —
with diode protection circuit DC (DR) (DQ) DJ (DW) (DY) (DZ) (DB) (DG) (DE) DD (DP) (DS) (DA) (DF) (DT)
[V] 24 48 110 220
DC
DC
Z24 (Z48) Z11 (Z2)
[V] 9 ➍ 12 24 ➎ 36 48 60 64 72 80 110 115 125 220 230 250
(ZR) (ZQ) ZJ (ZW) (ZY) (ZZ) (ZB) (ZG) (ZE) ZD (ZP) (ZS) (ZA) (ZF) (ZT)
— — DJ — — — — — — — — — — — —
230
220-
230
230-
240
380-
240
100-
110
380-
400
400-
400
415
110 120 127 200
400-
400
415
200-
200-
220
230
440 480 500 550 600
208-
240
4
Price Adder for: Type Available Control Voltages No Surcharge
Special control voltages
( ) Control voltages in parentheses: No inventory
➍ Extended operating limits 0.65…1.3 x U
➎ Extended operating limits 0.7…1.25 x U
100-M 12…500 V 50 Hz, 12…600 V 60 Hz, 12…250 VDC > 25 pieces
100-C 12…600 V 50 Hz, 12…600 V 60 Hz, 12…250 VDC > 20 pieces
s
s
Accessories - Page 4-24
Specifications - Page 4-36
Dimensions - Page 4-61
Rockwell Automation 4-15
Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6
Contactors
Product Selection
Reversing Contactors
• 3 main contacts, coil connections above
• Mechanical / Electrical interlock included
• Wiring set for main pole interconnection included
4
AC-1
(40°C)
[A] 230 V 400 / 415 V 500 V 690 V 230 V 400 / 415 V 500 V 690 V
20 1.5 2.2 2.2 — 6.5 5.3 4 —
20344—1297—
20 3 5.5 ➍ 4—12 12 ➍ 7—
32344412975
32 4 5.5 5.5 5.5 15 12 10 7
32 5.5 7.5 7.5 7.5 20 16 14 9
32 7.5 11 13 10 26.5 23 20 12
50 10 15 15 15 35 30 25 18 0 0 2
50 11 18.5 / 20 20 18.5 38 37 30 21 0 0 2
85 13 22 25 22 44 43 38 25 0 0 2
100 18.5 32 37 32 62 60 55 34 1 1 0 ➎
100 22 40 45 40 72 72 67 42 1 1 0 ➎
100 25 45 55 45 85 85 80 49 1 1 0 ➎
Bulletin CAB contactors are suitable for use with operating voltages up to 1000V. Bulletin CAB6-...-El contactors are equipped with electronic coil control
160 25 45 55 80 85 85 85 85 1 1 0
160 32 55 63 100 105 105 105 105 1 1 0
250 45 75
250 55 90 / 100 110 160 170 170 170 170 1 1 0
350 63 110 / 125 150 200 210 210 210 210 1 1 0
350 80 132 / 150 160 250 250 250 250 250 1 1 0
450 90 160 200 300 300 300 300 300 1 1 0
500 132 220 / 250 300 ➏ 425 ➏ 420 420 420 ➏ 420➏ 11 0
Switching of 3-phase Motors AC-2, AC-3, AC-4 (60 °C)
[kW] ➊ [A]
80 110 140 140 115 115 1 1 0
90 132 140 140 140 140 1 1 0
Auxiliary
Contact
per Contactor
10 0➋ ➌
01 0➋
10 0➋ ➌
01 0➋
10 0➋ ➌
01 0➋
10 0
01 0
10 2
01 0
10 2
01 0
10 2
01 0
Auxiliary
Contact
on Interlock
104-M05N ⊗ 3 ◆
104-M05N ⊗ 31 ◆
104-M09N ⊗ 3 ◆
104-M09N ⊗ 31 ◆
104-M12N ⊗ 3 ◆
104-M12N ⊗ 31 ◆
104-C09 ⊗ 10 -E ◆
104-C09 ⊗ 00 -E ◆
104-C12 ⊗ 10 -E ◆
104-C12 ⊗ 00 -E ◆
104-C16 ⊗ 10 -E ◆
104-C16 ⊗ 00 -E ◆
104-C23 ⊗ 10 -E ◆
104-C23 ⊗ 00 -E ◆
104-C30 ⊗ 00 -E ◆
104-C37 ⊗ 00 -E ◆
104-C43 ⊗ 00 -E ◆
104-C60 ⊗ 10 -E ◆
104-C72 ⊗ 10 -E ◆
104-C85 ⊗ 10 -E ◆
CAU ✤ B6-85- 10 ⊗
CAU ✤ B6-105- 10 ⊗
CAU ✤ B6-105-EI- 10 ⊗
CAU ✤ B6-140- 10 ⊗
CAU ✤ B6-140-EI- 10 ⊗
CAU ✤ B6-170-EI- 10 ⊗
CAU ✤ B6-210-EI- 10 ⊗
CAU ✤ B6-250-EI- 10 ⊗
CAU ✤ B6-300-EI- 10 ⊗
CAU ✤ B6-420-EI- 10 ⊗
Cat. No. PQ
1
1
1
Options Cat. No. Suffix Description Ordering Example
◆ Mechanical interlock
✤ Mechanical interlock
⊗ Voltage suffix code e.g. KJ Voltage suffix code from the table on the next page 104-M05NKJ3
➊ Power ratings: Preferred values according to IEC 60072-1
➋ DC-control only available without mechanical interlock
➌ For electronic interlock additional N.C. contacts required
PQ = Package Quantity
Accessories - Page 4-24
Specifications - Page 4-36
Dimensions - Page 4-61
No Entry with mechanical interlock (standard) 104-M05N⊗3
-X without mechanical interlock 104-M05N⊗3-X
No Entry without mechanical interlock (standard) CAU-B6-105-EI-10⊗
M with mechanical interlock CAUMB6-105-EI-10⊗
➍ Value applies only to AC-2 and AC-3
➎ Bulletin 100-MCA00 mechanical interlock. Electrical interlock via the
front mounted auxiliary contact block (2 pole)
➏ Value applies only to AC-2 and AC-3; AC-4: 360 A
4-16 Rockwell Automation
⊗ Voltage Suffix Codes for AC Control
[V] 24 48 110
104-M
104-C
CAUB6-85…CAUB6-140 ➐
CAUB6-105-EI…CAUB6-250-EI
CAUB6-300-EI…CAUB6-420-EI 50/60 Hz
50 Hz — — D — — (A) — — KK
60 Hz — — — D — — (A) — — KK
50/60 Hz
50 Hz
60 Hz
50/60 Hz
50 Hz
60 Hz
50/60 Hz
50 Hz
60 Hz
50/60 Hz
50/60 Hz
KD KH — — KF — — (KT) — —
[V]122432 36 42 48100
(R) (K) (V) (W) (X) (Y) (KP) — (D) (P) (S) (KG) — — — —
(Q) (J) — (V) — (X) — (KP) — (D) — — (KG) — (H) (L)
— KJ — — — KY (KP) — KD — — (KG) — (KL) — —
220-
[V]
230
(F) — (VA) (T) — — — (N) — (G) (B) — (M) (C) —
— — — (A) (T) (I) (E) — — — (N) (B) — — (C)
— KF — (KA) — — — — KN — (KB) — — — —
[V] 24 28 48 55 110 127
05 — 08 — 10 — 13 — (15) — — 16 (17) — —
— 05 — 08 — 10 — — — 13 (15) — — 16 (17)
— — — — (48) — — 54 (55) — — — — — —
24-2843-65110-
[V]
05 08 10 14 16
— 08 10 14 16
230
110-
230
120
230-
240 277 347 380
240
208-
277
380-
400
130
Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6
Contactors
Product Selection
220-
230
230-
240
220-
230
380-
240
100-
110
380-
400
230 240 260 277
400-
400
415
110 120 127 200
400-
400
440 480 500 550 600
415
380-
400
200-
220
415
200-
230
440-
460
208
480
208-
240
4
⊗ Voltage Suffix Codes for DC Control
104-M
with diode protection circuit DC
104-C09…C43
with diode protection circuit DC
104-C60…C85 DC
with diode protection circuit DC
CAB6-85…CAB6-140
CAB6-105-EI…CAB6-300-EI
CAB6-420-EI DC
Price Adder for: Type Available Control Voltages No Surcharge
Special control voltages
CAUB6-85…CAUB6-140 ➐
( ) Control voltages in parentheses: No inventory
E Wiring per IEC standard
➐ 50/60 Hz coils for CAB6-140 contactor not available
➑ Extended operating limits 0.65…1.3 x U
➒ Extended operating limits 0.7…1.25 x U
[V] 24 48 110 220
Z24 (Z48) Z11 (Z2)
DC
ZD24 — —
[V] 9 ➑ 12 24 ➒ 36 48 60 64 72 80 110 115 125 220 230 250
DC
(ZR) (ZQ) ZJ (ZW) (ZY) (ZZ) (ZB) (ZG) (ZE) ZD (ZP) (ZS) (ZA) (ZF) (ZT)
— — DJ — — — — — — — — — — — —
— — — — — — — — — — — — — — —
(DR) (DQ) DJ (DW) (DY) (DZ) (DB) (DG) (DE) DD (DP) (DS) (DA) (DF) (DT)
[V] 24 48 110 220
DC
DC
66 (70) 76 (86)
24-2848-7290-
[V]
66 (70) 76 — (86) —
— (70) — 76 — (86)
104-M 12…500 V 50 Hz, 12…600 V 60 Hz, 12…250 VDC > 25 pieces
104-C 12…600 V 50 Hz, 12…600 V 60 Hz, 12…250 VDC > 20 pieces
s
s
110-
170-
135
135
21…550 V 50 Hz, 21…575 V 60 Hz, 110…240 V 50/60 Hz,
255
190-
255
24…240 VDC
> 25 pieces
Accessories - Page 4-24
Specifications - Page 4-36
Dimensions - Page 4-61
Rockwell Automation 4-17
Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6
Contactors
Product Selection
Safety Contactors
• AC / DC control
• 3 / 4 main contacts
• Positively guided contacts according to IEC 947-5-1
• Mechanically coupled Contactor and Auxiliary contact block
• Protection against unintended actuation
• Auxiliary contacts are electronically compatible according to
4
With 3 Main Contacts
AC-1
(40°C)
[A] 230 V 400 / 415 V 500 V 690 V 230 V 400 / 415 V 500 V 690 V
32 3 4 4 4 11.5 9 7 5
32 4 5.5 5.5 5.5 14.5 12 10 7
32 5.5 7.5 7.5 7.5 20 16 / 15 13 9.3
32 7.5 11 11 10 24 23 / 22 18 12
50 10 15 15 15 34 30 / 29 24 17
50 11 18.5 18.5 18.5 37 37 / 36 30 20
85 13 22 22 22 42 43 / 41 34 25
100 18.5 30 30 30 62 60 / 58 45 34
100 22 37 37 37 70 72 / 69 56 42
100 25 45 45 45 85 85 / 82 67 49
DIN 19240
Switching of 3-phase Motors AC-2, AC-3, AC-4 (60 °C)
[kW] ➊ [A]
Positively Guided
Auxiliary Contacts
05
14
23
05
14
23
05
14
23
05
14
23
04
22
04
22
04
22
04
22
04
22
04
22
Cat. No. PQ
100S-C09⊗05C
100S-C09⊗14C
100S-C09⊗23C
100S-C12⊗05C
100S-C12⊗14C
100S-C12⊗23C
100S-C16⊗05C
100S-C16⊗14C
100S-C16⊗23C
100S-C23⊗05C
100S-C23⊗14C
100S-C23⊗23C
100S-C30⊗04C
100S-C30⊗22C
100S-C37⊗04C
100S-C37⊗22C
100S-C43⊗04C
100S-C43⊗22C
100S-C60⊗04C
100S-C60⊗22C
100S-C72⊗04C
100S-C72⊗22C
100S-C85⊗04C
100S-C85⊗22C
1
With 4 Main Contacts
AC-1
(40°C)
[A] 230 V 400 / 415 V 500 V 690 V 230 V 400 / 415 V 500 V 690 V
32 7.5 11 11 10 24 23 / 22 18 12
PQ = Package Quantity
Accessories - Page 4-24
Specifications - Page 4-36
Dimensions - Page 4-61
Switching of 3-phase Motors AC-2, AC-3, AC-4 (60 °C)
[kW] ➊ [A]
Positively Guided
Auxiliary Contacts
04
04
22100S-C23⊗422C
22100S-C23⊗322C
Cat. No. PQ
100S-C23⊗404C
100S-C23⊗304C
1
4-18 Rockwell Automation
Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6
Reversing-Safety Contactors
• AC / DC control
• 3 main contacts, coil connections above
• Positively guided contacts acc. to IEC 947-5-1
• Mechanically coupled Contactor and Auxiliary contact block
• Protection against unintended actuation
• Auxiliary contacts are electronically compatible according
• to DIN 19240
• Mechanical / Electrical interlock included
• Wiring set for main pole interconnection included
With 3 Main Contacts
AC-1
(40°C)
[A] 230 V 400 / 415 V 500 V 690 V 230 V 400 / 415 V 500 V 690 V
32 3 4 4 4 11.5 9 7 5
32 4 5.5 5.5 5.5 14.5 12 10 7
32 5.5 7.5 7.5 7.5 20 16 / 15 13 9.3
32 7.5 11 11 10 24 23 / 22 18 12
50 10 15 15 15 34 30 / 29 24 17
50 11 18.5 18.5 18.5 37 37 / 36 30 20
85 13 22 22 22 42 43 / 41 34 25
100 18.5 30 30 30 62 60 / 58 45 34
100 22 37 37 37 70 72 / 69 56 42
100 25 45 45 45 85 85 / 82 67 49
Switching of 3-phase Motors AC-2, AC-3, AC-4 (60 °C)
[kW] ➊ [A]
⊗ Voltage Suffix Codes for AC Control
[V]122432364248100
100S-C. 104S-C
50 Hz
60 Hz
50/60 Hz
50 Hz
60 Hz
50/60 Hz
(R) (K) (V) (W) (X) (Y) (KP) — (D) (P) (S) (KG) — — —
(Q) (J) — (V) — (X) — (KP) — (D) — — (KG) — (L)
— KJ — — — KY (KP) — KD — — (KG) — (KL) —
220-
[V]
230
(F) — (VA) (T) — — — (N) — (G) (B) — (M) (C) —
— — — (A) (T) (I) (E) — — — (N) (B) — — (C)
— KF — (KA) — — — — KN — (KB) — — — —
230
230-
240 277 347 380
240
⊗ Voltage Suffix Codes for DC Control
100S-C09…C43, 104S-C09…C43
with diode protection circuit DC
100S-C60…C85, 104S-C60…C85 DC
with diode protection circuit DC
[V] 9 ➌ 12 24 ➍ 36 48 60 64 72 80 110 115 125 220 230 250
DC
(ZR) (ZQ) ZJ (ZW) (ZY) (ZZ) (ZB) (ZG) (ZE) ZD (ZP) (ZS) (ZA) (ZF) (ZT)
— — DJ — — — — — — — — — — — —
— — — — — — — — — — — — — — —
(DR) (DQ) DJ (DW) (DY) (DZ) (DB) (DG) (DE) DD (DP) (DS) (DA) (DF) (DT)
Positively Guided
Aux. contact per Contactor
05➋
05
05➋
05
05➋
05
05➋
05
04➋
04
04➋
04
04➋
04
04➋
04
04➋
04
04➋
04
100-
110 120 127 200
110
380-
400
400
400-
440 480 500 550 600
415
Contactors
Product Selection
Cat. No. PQ
104S-C09⊗012C
104S-C09⊗010C
104S-C12⊗012C
104S-C12⊗010C
104S-C16⊗012C
104S-C16⊗010C
104S-C23⊗012C
104S-C23⊗010C
104S-C30⊗010C
104S-C30⊗008C
104S-C37⊗010C
104S-C37⊗008C
104S-C43⊗010C
104S-C43⊗008C
104S-C60⊗010C
104S-C60⊗008C
104S-C72⊗010C
104S-C72⊗008C
104S-C85⊗010C
104S-C85⊗008C
200-
200-
220
230
1
208-
240
4
Price Adder for: Type Available Control Voltages No Surcharge
Special control voltages 100S-C. 104S-C 12…600 V 50 Hz, 12…600 V 60 Hz, 12…250 VDC > 20 pieces
( ) Control voltages in parentheses: No inventory
➊ Power ratings: Preferred values according to IEC 60072-1
➋ With mechanical and electrical locking 100-MCA02
➌ Extended operating limits 0.65…1.3 x U
➍ Extended operating limits 0.7…1.25 x U
s
s
Accessories - Page 4-24
Specifications - Page 4-36
Dimensions - Page 4-61
Rockwell Automation 4-19
Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6
Contactors
Assignment of Contacts
Contactors with 3 Main Contacts
71
51
81
51
71
81
53
71
83
626172
5
436
31
222132
436
82
21
22
41
42
5
52
1
2
100S-C09⊗05C…C23⊗05C 100S-C09⊗14C…C23⊗14C 100S-C09⊗23C…C23⊗23C
4
11
12
1
2
100S-C30⊗04C…C85⊗04C 100S-C30⊗22C…C85⊗22C
52
1
2
13
14
1
2
626172
5
436
31
222132
436
82
13
14
43
44
5
54
1
2
626172
436
Contactors with 4 Main Contacts
11
1
12
31
222132
5
41
42
7
11
12
1
31
222132
5
41
42
R1
84
5
21
22
436
31
222132
5
436
8
43
44
7
8
2
100S-C23⊗404C 100S-C23⊗304C
13
14
1
2
100S-C23⊗422C 100S-C23⊗322C
2
13
14
1
2
436
31
222132
5
436
R2
43
44
R1
R2
Product Selection - Page 4-10
4-20 Rockwell Automation
Reversing-Safety Contactors with 3 Main Contacts
51
71
81
21
51
71
81
Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6
Contactors
Assignment of Contacts
51
71
81
51
71
81
52
1
2
626172
436
82
5
21
22
626172
436
82
5
21
22
104S-C09⊗012C…C23⊗012C 104S-C09⊗010C…C23⊗010C
22
21
22
1
52
2
626172
5
436
82
21
22
52
1
2
1
52
2
626172
5
436
82
21
22
4
51
52
1
2
71
81
626172
82
3
5
4
6
104S-C30⊗010C…C85⊗010C 104S-C30⊗008C…C85⊗008C
21
22
21
22
51
52
1
2
71
626172
3
4
81
5
82
6
51
52
1
2
71
626172
3
4
81
82
5
6
51
1
52
2
71
626172
3
4
81
82
5
6
Product Selection - Page 4-10
Rockwell Automation 4-21
Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6
2
2
1
Contactors
Assignment of Contacts
Device Combinations in Accordance with EN Standards
Auxiliary Contact Blocks Contactors 100-C (AC / DC Control)
100-C30⊕⊗00
5
13
14
100-C09⊕⊗01
100-C12⊕⊗01
100-C16⊕⊗01
100-C23⊕⊗01
1
A1
K1
A2
436
2
100-C09⊕⊗10
Circuit Diagram Control
100-C12⊕⊗10
100-C16⊕⊗10
100-C23⊕⊗10
1
A1
K1
A2
436
2
Front-mounted ➊
4
61
100-FA02 AC / DC 10 + 02 = 12 01 + 02 = 03 00 + 02 = 02 00 + 02 = 02 00 + 02 = 02 00 + 02 = 02
100-FA11 AC / DC 10 + 11 = 21 01 + 11 = 12 00 + 11 = 11 00 + 11 = 11 00 + 11 = 11 00 + 11 = 11
100-FB11 AC / DC — — 00 + 11 = 11 00 + 11 = 11 00 + 11 = 11 00 + 11 = 11
100-FC11 AC / DC10 + 11 = 2101 + 11 = 12————
100-FA20 AC / DC 10 + 20 = 30 01 + 20 = 21 00 + 20 = 20 00 + 20 = 20 00 + 20 = 20 00 + 20 = 20
100-FBL11 ➋ AC / DC — — 00 + 11 = 11 00 + 11 = 11 00 + 11 = 11 00 + 11 = 11
100-FA22 AC / DC 10 + 22 = 32 01 + 22 = 23 00 + 22 = 22 00 + 22 = 22 00 + 22 = 22 00 + 22 = 22
100-FB22 AC / DC — — 00 + 22 = 22 00 + 22 = 22 00 + 22 = 22 00 + 22 = 22
100-FC22 AC / DC10 + 22 = 32—————
100-FA31 AC / DC 10 + 31 = 41 01 + 31 = 32 00 + 31 = 31 00 + 31 = 31 00 + 31 = 31 00 + 31 = 31
100-FA40 AC / DC 10 + 40 = 50 01 + 40 = 41 00 + 40 = 40 00 + 40 = 40 00 + 40 = 40 00 + 40 = 40
100-FAL22 ➋ AC / DC 10 + 22 = 32 01 + 22 = 23 00 + 22 = 22 00 + 22 = 22 00 + 22 = 22 00 + 22 = 22
51
62
52
61
53
62
54
21
13
22
14
31
23
32
24
53
63
54
64
5
17
26
18
71
83
53
626172
84
54
31
43
13
222132
44
14
43
53
21
323144
54
22
73
83
53
626174
84
54
73
83
53
646374
84
54
75
87
53
626176
88
54
Side-mounted ➊
21
32
100-SB01 AC / DC 10 + 01 = 11 01 + 01 = 02 ➌ 00 + 01 = 01 00 + 01 = 01 00 + 01 = 01 00 + 01 = 01
100-SB10 AC / DC 10 + 10 = 20 ➌ 01 + 10 = 11 00 + 10 = 10 00 + 10 = 10 00 + 10 = 10 00 + 10 = 10
100-SB02 AC / DC 10 + 02 = 12 ➌ — 00 + 02 = 02 00 + 02 = 02 00 + 02 = 02 00 + 02 = 02
100-SB11 AC / DC 10 + 11 = 21 ➌ 01 + 11 = 12 ➌ 00 + 11 = 11 00 + 11 = 11 00 + 11 = 11 00 + 11 = 11
100-SB20 AC / DC 10 + 20 = 30 ➌ 01 + 20 = 21 ➌ 00 + 20 = 20 00 + 20 = 20 00 + 20 = 20 00 + 20 = 20
100-SBL11 ➋ AC / DC 10 + 11 = 21 ➌ 01 + 11 = 12 ➌ 00 + 11 = 11 00 + 11 = 11 00 + 11 = 11 00 + 11 = 11
22
13
44
14
43
4232
121122
41
4432
141322
43
4434
141324
43
7
48
18
47
31
21
31
21
31
23
33
25
36
26
35
5
21
2
100-C37⊕⊗00
100-C43⊕⊗00
100-C60⊕⊗00
100-C72⊕⊗00
100-C85⊕⊗00
1
A1
K1
A2
436
2
100-C23⊕⊗400 100-C23⊕⊗300 100-C23⊕⊗200
5
1
5
A1
K1
A2
7
436
8
2
1
R1
5
A1
K1
A2
43R2
2
K1
6
A1
A2
1
R1
43R2
R4R32
Product Selection - Page 4-10
4-22 Rockwell Automation
Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6
Device Combinations in Accordance with EN Standards
Auxiliary Contact Block Miniature Contactor 100-M (AC / DC Control)
Circuit Dia-
gram
Control
100-M05N⊗3
100-M09N⊗3
100-M12N⊗3
1
A1
K1
A2
436
2
100-M09N⊗4
5
13
14
1
5
A1
K1
A2
436
2
Front-mounted
31
195-MB02 AC / DC 10 + 02 = 12 40 + 02 = 42 —
195-MB11 AC / DC 10 + 11 = 21 40 + 11 = 51 —
195-MA20 AC / DC 10 + 20 = 30 40 + 20 = 60 01 + 20 = 21
195-MB22 AC / DC 10 + 22 = 32 40 + 22 = 62 —
21
32
22
33
222134
53
63
54
64
21
31
43
545322
32
44
73
83
53
195-MA40 AC / DC 10 + 40 = 50 40 + 40 = 80 01 + 40 = 41
646374
84
54
7
8
100-M05N⊗31
100-M09N⊗31
100-M12N⊗31
1
5
A1
K1
A2
436
2
21
22
Contactors
Assignment of Contacts
4
Auxiliary Contact Block Contactors CAB6 (AC / DC Control)
CAB6-140-EI-00⊗
Circuit
Diagram
Control
CAB6-85-00⊗
CAB6-105-00⊗
CAB6-140-00⊗
CAB6-85-11⊗
CAB6-105-11⊗
CAB6-140-11⊗
CAB6-85-L11⊗
CAB6-105-L11⊗
CAB6-140-L11⊗
CAB6-85-L22⊗
CAB6-105-L22⊗
CAB6-140-L22⊗
CAB6-170-EI-00⊗
CAB6-210-EI-00⊗
CAB6-250-EI-00⊗
CAB6-300-EI-00⊗
CAB6-420-EI-00⊗
1
5
A1
K1
436
A2
2
1
13
5
436
21
14
22
A1
K1
A2
2
1
B1
A1
K1
A2
2
436
35
43
5
44
1
5
B1
A1
1
A2
36
436
2
35
43
13
21
14
22
K1
44
36
Right-side mounted
31
CAB6-P2-11
CAB6-P4-11
CAB6-P2-L11 ➋ACDC
43
32
44
71
83
72
84
35
43
44
36
31
AC
DC
AC / DC
AC
DC
AC / DC
AC / DC
CAB6-P2-B11 ➍ACDC
3432
AC / DC
00 + 11 = 11
—
—
00 + 11 = 11
—
—
00+ 11 = 11
—
—
00+ 11 =11
—
—
11 + 11 = 22
—
—
11 + 11 = 22
—
—
11 + 11 = 22
—
—
11 + 11 = 22
—
—
—
11+ 11 = 22
—
—
11 + 11 = 22
—
—
11 + 11 = 22
—
—
11 + 11 = 22
—
—
22 + 11 = 33
—
—
22 + 11 = 33
—
—
22 + 11 = 33
—
—
22 + 11 = 33
—
00 + 11 = 11
00 + 11 = 11
00 + 11 = 11
00 + 11 = 11
Left-side mounted
AC
DC
AC / DC
AC
DC
AC / DC
CAB6-P1-11
CAB6-P3-11
21
13
22
14
61
53
62
54
61
CAB6-P3-B11 ➍ACDC
6462
➊ Up to 8 auxiliary contacts possible: Contactor + Front-mounted (AC max. 4 N.C:/DC max. 4 N.C.), Side-mounted
(AC max. 2 N.O./DC max. 2 N.O. and max. 2 N.C.)
AC / DC
00 + 11 = 11
—
—
00 + 11 = 11
—
—
00 + 11 = 11
—
—
11 + 11 = 22
—
—
11 + 11 = 22
—
—
11 + 11 = 22
—
—
—
11 + 11 = 22
—
—
11 + 11 = 22
—
—
11 + 11 = 22
—
—
22 + 11 = 33
—
—
22 + 11 = 33
—
—
22 + 11 = 33
—
00 + 11 = 11
00 + 11 = 11
00+ 11 = 11
➋ Early make and/or late break
➌ Double numbering: Because of double numbering only left-side mounting is recommended
➍ Electronically suited auxiliary contact block
CAB6-140-EI-11⊗
CAB6-170-EI-11⊗
CAB6-210-EI-11⊗
CAB6-250-EI-11⊗
CAB6-300-EI-11⊗
CAB6-420-EI-11⊗
1
5
A1
A2
436
2
—
—
1
13
5
A1
K1
A2
21
14
436
22
2
—
—
11 + 11 = 22
—
—
—
—
11 + 11 = 22
—
—
—
—
11 + 11 = L22
—
—
—
—
11 + 11 = 22
—
—
—
—
11 + 11 = 22
—
—
—
—
11 + 11 = 22
—
—
—
—
11 + 11 = 22
Product Selection - Page 4-10
Rockwell Automation 4-23
Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6
Contactors
Accessories
Modules: Auxiliary Contact Blocks
Description Circuit Diagram For Use with Cat. No. PQ
Auxiliary Contact Blocks for Front Mounting
• 2- and 4-pole
• Simple and quick attachment - no tools needed
4
• Electronically compatible H-contacts
• Contacts themselves in auxiliary contact block
positively guided
• Types with the same functions with several connection
numbering variants
Auxiliary Contact Blocks for Front Mounting ➊
• 2- and 4-pole
• Simple and quick attachment - no tools needed
• Electronically compatible contacts
• Positive guidance in auxiliary and with main contactor
poles (excluding type L)
• Types with the same functions with several connection
numbering variants
L = Early Make/Late Break
31
21
32
22
33
222134
53
63
54
64
21
31
43
545322
32
44
73
83
53
646374
84
54
61
51
62
52
61
53
62
54
21
13
22
14
31
23
32
24
53
63
54
64
25
17
26
18
71
83
53
626172
84
54
43
53
21
323144
54
22
31
43
13
222132
44
14
73
83
53
626174
84
54
73
83
53
646374
84
54
75
87
53
626176
88
54
100-M…3
100-M
100-M
100-M…3,
100-M…4
100-M
100-C
100-C
C30⊗00…C85⊗00
C09⊗10…C23⊗10
100-C
C30⊗00…C85⊗00
100-C
C09⊗10…C23⊗10
C30⊗00…C85⊗00
100-C
100-C
100-C
195-MB02
195-MB11
195-MA20
195-MB22
195-MA40
100-FA02 ✫
100-FA11 ✫
100-FB11 ✫
100-FC11 ✫
100-FA20 ✫
100-FBL11 ✫
100-FA22 ✫
100-FC22 ✫
100-FB22 ✫
100-FA31 ✫
100-FA40 ✫
100-FAL22 ✫
10
PQ = Package Quantity
Product Selection - Page 4-10
4-24 Rockwell Automation
Loading...