Rock-Slide Engineering PATRIOT SERIES – FRONT BUMPER User Manual

QTY

DESCRIPTION

1

Patriot Front Bumper

2

5/16'' Bolts

2

5/16'' Nuts

4

3/8'' Bolts

4

3/8'' Nuts

4

5/16'' Washers

4

Large Washers

8

3/8'' Washers

Ford F-150/Raptor Patriot Front Bumper & Winch Plate

FB-S-100-RA, FB-F-101-RA, FB-F-102-RA, FB-LP-RA, FB-CB-RA

FB-WP-RA

PARTS LIST

*If any parts listed are missing or damaged please call Rock-Slide Engineering @

435-752-4580 prior to installation

FORD RAPTOR WINCH PLATE INSTALLATION

FB-WP-RS

1. Remove factory bolts from bottom of frame rails.

2. Insert winch plate. Align holes on winch plate with factory holes on the frame rail.

3. Using the 7/16’’ washers provided reinsert the factory bolts and tighten.

4. Install winch using the hardware provided from the winch manufacture.