QTY
DESCRIPTION
1
Front Bumper
4
½” x 5” Bolts
6
½” Nuts
10
½” Washers
4
7/16” x 1” Bolts
4
7/16” Nuts
8
7/16” Washers
2
½” x 1.5” SS Button
Head Bolts
Ford F-250, F-350, F-450 Front Bumper Installation
FB-F-100-SD-SRW, FB-F-101-DRW
Parts List
Installation Instruction RSEI 114
QTY
DESCRIPTION
1
Bull Bar
8
½” x1.5” Bolts
8
½” Washers
Center light
bar
Optional Bull Bar
*If any parts listed are missing or damaged please call Rock-Slide Engineering @
435-752-4580 prior to installation
Bumper Installation
1. (OPTIONAL IF INSTALLING LIGHTS) Install desired aftermarket lights in
center and side light pockets. Use mounting hardware included with lights
Installation Instruction RSEI 114
Side hole light
pockets
Bolts from
bumper into Bull
Bar
2. Be sure to run the light wires through the hole to finish the light installation
3. If purchased with the optional Bull Bar, attach the Bull Bar before installing the
bumper
a. Bolt from inside the bumper into the Bull Bar using 4- 7/16” bolts and
washers on each side of the Bull bar
Installation Instruction RSEI 114
4. Remove the factory bumper. Save the mounting hardware
Tow hook bracket
and factory hardware
from the bracket into
the bumper
Side brackets,
looking from the
front tire wheel well.
Use Bolt, washer,
through bracket,
washer, nut
5. Mount the bumper to the truck using the factory hardware and the factory bracket
attached to the tow hooks. Bolt from the back through the factory bracket into the
bumper on both frame rails
6. Bolt from the outer brackets on both sides into the bracket on the bumper using
the 7/16” nuts, bolts and washers
Installation Instruction RSEI 114
7. Install lower stiffening bracket from the bumper to the inside of the frame rail on
Button Head bolt
from bumper through
bracket
Bolt through the frame
rail into the bracket,
then washer, nut
both frame rails
a. Attach the bracket to the bumper from the bottom up using the ½” x 1.5”
Button Head Bolts, washer and nut
b. Attach the bracket to the truck through the frame rail using the ½” x 5”
Bolt, washer, nut
8. Complete wiring on any installed lights
9. Enjoy!
Thank you for choosing Rock-Slide Engineering products. We value your business and
welcome your feedback/suggestions. If you have any concerns please contact us directly
@ 435-752-4580. We are here to help you!
Installation Instruction RSEI 114
Loading...