Rock N Roller R12RT, R12 Stealth User manual

R12RT Model Specifications Your RocknRoller Multi-Cart shipping box should contain a frame and the following parts:

Length (Compact) 34” 1 x 1” (25 mm) square plastic endplugs

Length (Extended) 52” 1 x ¾” (20 mm) square plastic endplugs

Width (Frame Bed) 13.5” 2 x ¼” x 1 ¼” cotter pins

Width (Rear) 20” 2 x ¼” x ¾” cotter pins

Height (Folded) 12” 2 x 35 mm rivert pin

Height (Unfolded) 41.5” 2 x 20 mm flat washer

Front Casters 8” x2.5” 2 x 10”x 3” (254 mm x 76 mm) wheels

Rear Wheels 10” x 3” 2 x 8”x2.5” {203 mm x 64 mm) stem casters

Weight 33 lbs. 1 x Assembly/instruction sheet

Load Capacity 500 lbs.

1. Installing Rear Wheels

Gently slide wheel over axle as shown. Do not force
wheels onto axle. It is recommended to lubricate axles
with light grease before installing. Install cotter pins and
bend ends outward.

2. Installing Front Swivel Casters

Carefully insert caster stem into receptor tube and line
up caster stem holes with the receptor tube holes. Stem
should t very snugly in receptor tube. Install cotter pins
and bend ends outward.

Extending Frame

Raising Foldable Sides

Loosen wingbolts 1/4 turn. Step on
rear axle and push in extension
stop button. Pull up on frame as
shown until stop button engages.
Retighten wingbolts.

Firmly press down on release cable
while raising other end of foldable
side as shown.

Repeat with other side.

Quick Shelf System Solid Deck

Cargo

Extension Rack

Cable/headphone

hanger

2 Tier multi-media

shelf

Laptop Shelf Flex Straps